• 제목/요약/키워드: C Band

검색결과 3,059건 처리시간 0.028초

Band Gap Energy of SrTiO3Thin Film Prepared by the Liquid Phase Deposition Method

  • Gao, Yanfeng;Masuda, Yoshitake;Koumoto, Kunihito
    • 한국세라믹학회지
    • /
    • 제40권3호
    • /
    • pp.213-218
    • /
    • 2003
  • Band gap energies of SrTiO$_3$(STO) thin film on glass substrates were studied in terms of annealing temperature. The STO thin film was fabricated by our newly developed method based on the combination of the Self-Assembled Monolayer(SAM) technique and the Liquid Phase Deposition(LPD) method. The as-deposited film demonstrated a direct band gap energy of about 3.65 eV, which further increased to 3.73 eV and 3.78 eV by annealing at 40$0^{\circ}C$ and 50$0^{\circ}C$, respectively. The band gap energy saturated at about 3.70 eV for the crystallized film which was obtained by annealing at 600-$700^{\circ}C$. The relatively large band gap energies of our crystallized films were due to the presence of minor amorphous phase, grain boundaries and oxygen vacancies generated by annealing in air.

홍옥(紅玉) Polyphenol Oxidase의 일반적(一般的) 성질(性質) 및 활성(活性) Band의 열안정성(熱安定性) (Some Properties of Polyphenol Oxidase from Apple (Jonathan) and Thermal Stability of the Active Bands)

  • 정기택;서승교;송형익
    • 한국식품영양과학회지
    • /
    • 제13권4호
    • /
    • pp.397-402
    • /
    • 1984
  • 사과주(酒)의 효소적(酵素的) 갈변(褐變)에 대한 기초(基礎) 연구(硏究)의 일환으로, 홍옥에서 polyphenol oxidase(EC 1.10.3.1)을 추출(抽出), 조정제(粗精製)하여 그 일반적(一般的) 성질(性質) 및 열처리(熱處理)에 따른 polyphenol oxidase 활성(活性) band의 변화(變化)를 조사(調査)한 결과(結果)는 다음과 같다. 홍옥 polyphenol oxidase의 최적(最適)pH는 6.5, 최적온도(最適溫度)는 $30^{\circ}C$였으며, 주(主) 기질(基質)은 o-diphenol이었다. 열(熱)에 대한 안정성(安定性)은 $60^{\circ}C$$70^{\circ}C$에서 1시간(時間) 처리후(處理後)에도 잔재활성(殘存活性)이 각각(各各) 35%, 15% 정도였다. Sodium metabisulfite, cysteine 및 ascorbate 는 0.5 mM에서 거의 완전히 효소활성(酵素活性)을 저해(沮害)하였으나 EDTA는 저해효과(沮害?果)가 아주 약하게 나타났다. 또한 알콜은 polyphenol oxidase의 활성(活性)에 아무린 영향(影響)을 미치지 않았다. 홍옥 polyphenol oxidase의 활성(活性) band는 4개로 관찰(觀察)되었고, $60^{\circ}C$$70^{\circ}C$에서 1시간(時間) 동안 발효액(醱酵液)을 열처리(熱處理)한 후(後)에는 각각(各各) 2개 및 1개의 활성(活性) band가 관찰(觀祭)되었다. 그러므로 각(各) band는 열(熱)에 대한 안정성(安定性)이 크게 차이(差異)가 있음을 알 수 있었으며, 또한 각(各) band의 열안정성(熱安定性)과 효소(酵素)의 열안정성(熱安定性) 성적과는 거의 일치(一致)되었다.

  • PDF

Yohimbine과 Atipamezole이 Xylazine-Ketamine 병용 마취견의 뇌파에 미치는 영향 (Effects of Yohimbine and Atipamezole in Dogs Anesthetized with Xylazine-Ketamine Combination on EEG)

  • 장환수;장광호;이만기;장인호
    • 한국임상수의학회지
    • /
    • 제19권2호
    • /
    • pp.174-185
    • /
    • 2002
  • We investigated the effects of yohimbine and atipamezole in dogs anesthetized with xylazine-ketamine combination on electroencephalography (EEG) . Experiment groups were divided into three according to antagonists . Saline (1 ml) was used as an antagonist in group C, yohimbine (0.1 mg/kg) in group Y and atipamezole (50 ug/kg) in group A. Each group consisted of 5 dogs. Glycopyrrolate was injected 15 minutes prior to xylazine injection. Xylazine (1.1 mg/kg, IM) and ketamime (10 mg/kg, IV) were injected with the interval of 10 minutes. After 15 minutes, antagonists were administered intravenously. For EEG measurements, a recording electrode was positioned at Cz, which was applied to International 10-20 system. Heart rates, body temperature, respiratory rates, arterial blood pressure, $PaO_2$$PaCO_2$$PaCO_2$ at S4 in group Y was significantly decreased(p<0.05). Changes of electrolytes were not significant, except value of $Cl^-$ at S3 in group A. Mean head-up time (the time dogs showing head-up movement after antagonist injection, minutes) was $38.23^{\circ}$ae6.46 in group C, 2.54 $\pm$ 0.93 in group Y and 2.12$\pm$ 1.32 in group A. Mean sternal recumbent time (the time dogs showing sternal recumbency after antagonist injection, minutes) was 45.93$\pm$ 10.27 in group C, 11.91 $\pm$ 7.19 in group Y and 9.88$\pm$ 3.38 in group A. Mean walking time (minutes) was 53.49$\pm$ 9.21 in group C, 22.10$\pm$ 11.10 in group Y and 18.48$\pm$ 4.39 in group A. In group Y all dogs showed excitation and muscle rigidity in emergence. In group A, two dogs were also showed excitation and muscle rigidity, but were weaker than those of group Y.

차세대 레이더용 C-/X-/Ku-대역 GaN 집적회로 기술 동향 (Technological Trends of C-/X-/Ku-band GaN Monolithic Microwave Integrated Circuit for Next-Generation Radar Applications)

  • 안호균;이상흥;김성일;노윤섭;장성재;정현욱;임종원
    • 전자통신동향분석
    • /
    • 제37권5호
    • /
    • pp.11-21
    • /
    • 2022
  • GaN (Gallium-Nitride) is a promising candidate material in various radio frequency applications due to its inherent properties including wide bandgap, high carrier concentration, and high electron mobility/saturation velocity. Notably, AlGaN/GaN heterostructure field effect transistor exhibits high operating voltage and high power-density/power at high frequency. In next-generation radar systems, GaN power transistors and monolithic microwave integrated circuits (MMICs) are significant components of transmitting and receiving modules. In this paper, we introduce technological trends for C-/X-/Ku-band GaN MMICs including power amplifiers, low noise amplifiers and switch MMICs, focusing on the status of GaN MMIC fabrication technology and GaN foundry service. Additionally, we review the research for the localization of C-/X-/Ku-band GaN MMICs using in-house GaN transistor and MMIC fabrication technology. We also discuss the results of C-/X-/Ku-band GaN MMICs developed at Defense Materials and Components Convergence Research Department in ETRI.

Allium속 이배체 2종과 사배체 2종의 Giemsa C-분염핵형 (Giemsa C-banded Karyotypes in Two Diploid and Two Tetraploid Allium Species)

  • 서봉보
    • Journal of Plant Biology
    • /
    • 제32권3호
    • /
    • pp.181-188
    • /
    • 1989
  • C-banded karyotypes in A. anisopodium, A. sacculiferum, A. deltoide-fistulosum and A. splendens were investigated. The chromosome compositions were diploid of 2n=16 in A anisopodium and A. splendens, and teiraploid of 2n=32 in a. sacculiferum and A. deltoide-fistulosum. The bands were distributed in telomeric parts of the chromosomes dominantly in addition to interstitial regions sporadically, resulting in the specific C-banded karyo types according to the species. No centromeric band was observed in these species except only one chromosome in A. deltoidefistulosum. The interspecific relationship based on the C-band distribution will be discussed.

  • PDF

초고속 무선 통신을 위한 저전력 모뎀 SoC 설계 (Low Power SoC Modem Design for High-Speed Wireless Communications)

  • 김용성;임용석;홍대기
    • 반도체디스플레이기술학회지
    • /
    • 제9권2호
    • /
    • pp.7-10
    • /
    • 2010
  • In this paper, we design a modem SoC (System on Chip) for low power consumption and high speed wireless communications. Among various schemes of high speed communications, an MB-OFDM (Multi Band-Orthogonal Frequency Division Multiplexing) UWB (Ultra-Wide-Band) chip is designed. The MB-OFDM uses wide-band frequency to provide high speed data rate. Additionally, the system imposes no interference to other services. The 90nm CMOS (Complementary Metal-Oxide Semiconductor) technology is used for the SoC design. Especially, power management mode is implemented to reduce the power consumption.

5ft S-Band TT&C Antenna Test

  • Ahn Sang-il;Park Dong-Chul
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
    • /
    • pp.467-470
    • /
    • 2004
  • In early 2004, KARI developed 5ft S-Band TT&C antenna for especially KOMPSAT-2 operation in LEOP phase. This paper shows system features of 5ft S-Band antenna and its test result with KOMPSAT-l. Tracking test, command uplink test and telemetry downlink test were performed. Through tests, 5ft antenna was verified to be operational in uplink and downlink with KOMPSAT series. Due to its inherent wide 3dB beam-width of about 7deg at S-Band, this antenna system can be used very effectively even though orbital information is less accurate like LEOP and spacecraft safe mode.

  • PDF

A Dual-Band Through-the-Wall Imaging Radar Receiver Using a Reconfigurable High-Pass Filter

  • Kim, Duksoo;Kim, Byungjoon;Nam, Sangwook
    • Journal of electromagnetic engineering and science
    • /
    • 제16권3호
    • /
    • pp.164-168
    • /
    • 2016
  • A dual-band through-the-wall imaging radar receiver for a frequency-modulated continuous-wave radar system was designed and fabricated. The operating frequency bands of the receiver are S-band (2-4 GHz) and X-band (8-12 GHz). If the target is behind a wall, wall-reflected waves are rejected by a reconfigurable $G_m-C$ high-pass filter. The filter is designed using a high-order admittance synthesis method, and consists of transconductor circuits and capacitors. The cutoff frequency of the filter can be tuned by changing the reference current. The receiver system is fabricated on a printed circuit board using commercial devices. Measurements show 44.3 dB gain and 3.7 dB noise figure for the S-band input, and 58 dB gain and 3.02 dB noise figure for the X-band input. The cutoff frequency of the filter can be tuned from 0.7 MHz to 2.4 MHz.

SURFACE DEFORMATION MONITORING USING TERRASAR-X INTERFEROMETRY

  • Kim, Sang-Wan;Wdowinski, Shimon;Dixon, Tim
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
    • /
    • pp.422-425
    • /
    • 2008
  • TerraSAR-X is new radar satellite operated at X-band, multi polarization, and multi beam mode. Compared with C-band or L-band SAR, the X-band system inherently suffers from more temporal decorrelation, but is more sensitive to surface deformation monitoring due to short wavelength (3.1 cm) and high spatial resolution (1m-3m). It is generally expected that sensitivity to estimate surface movement using TerraSAR-X will be increased by the factor of 10, compared to current C-band system with low spatial resolution such as ERS-2, Envisat. Many urban areas are experiencing land subsidence due to water, oil and natural gas withdrawal, underground excavation, sediment compaction, and so on. Monitoring of surface deformation is valuable for effectively limiting damage areas. In addition high accuracy and spatially dense subsidence map can be achieved by X-band InSAR observation, promoting identification and separation of various subsidence processes and leading to enhanced understanding via mechanical modeling. In this study we will introduce some initial InSAR results using new TerraSAR-X SAR data for surface deformation monitoring.

  • PDF

Splitting effect of photocurrent for $CdIn_2Te_4$ single crystal

  • You, Sang-Ha;Hong, Kwang-Joon
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.84-85
    • /
    • 2009
  • The single crystals of p-$CdIn_2Te_4$ were grown by the Bridgman method without the seed crystal. From photocurrent measurements, it was found that three peaks, A, B, and C, correspond to the intrinsic transition from the valence band states of $\Gamma_7(A)$, $\Gamma_6(B)$, and $\Gamma_7(C)$ to the conduction band state of $\Gamma_6$, respectively. The crystal field splitting and the spin orbit splitting were found to be 0.2360 and 0.1119 eV, respectively, from the photocurrent spectroscopy. The temperature dependence of the $CdIn_2Te_4$ band gap energy was given by the equation of $E_g(T)=E_g(0)$ - $(9.43\times10^{-3})T^2$/(2676+T). $E_g(0)$ was estimated to be 1.4750, 1.7110, and 1.8229 eV at the valence band states of A, B, and C, respectively. The band gap energy of $p-CdIn_2Te_4$ at room temperature was determined to be 1.2023 eV.

  • PDF