• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.89-92
• /
• 2000

본 논문에서는 웨이블릿 변환과 확산코드를 이용하여 동영상 내부에 이진이미지패턴형 워터마크를 삽입할 수 있는 새로운 워터마킹 방법을 소개한다. 먼저, 동영상을 디코딩하여 RGB 데이터로 이루어진 인트라 프레임(I-frame)들을 구한다. 그리고 이것을 YC$_{b}$C$_{r}$ 좌표공간으로 변환한 후, 휘도 평면만을 3단계 DWT하여 확산코드와 다중가중치를 조합한 워터마크를 삽입한다. 실험에서는 제안한 방법으로 워터마킹된 영상의 화질을 기존의 방법들과 비교하고, 손실압축과 밝기(brightness)변화 그리고 대비(contrast)실험 등을 통해 제안한 방법의 견고성을 입증해 보인다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.135-136
• /
• 2015

본 논문은 냉장고 컴프레서용 단상유도전동기의 고효율화를 위한 회전자의 알루미늄 충진율 향상에 관한 설계적 기법에 관한 연구이다. 기존의 주조 방식과 제안한 주조 방식을 적용한 회전자의 FEM 해석과 이을 기반으로 하는 실제 회전자를 제작 및 비교 실험을 통하여 제안한 방식의 충진율이 향상된 회전자가 효율이 증가함을 확인함으로써 제안한 방식의 타당성을 입증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.514-516
• /
• 2001

소프트웨어 응용분야에서 재사용을 통한 프레임적 기반의 개발 기술이 발전하고 있으며, 특히 CORBA와 같은 분산 객체 환경과 GUI를 지원하는 프레임웍들의 구현 및 응용기술에 대한 연구가 이루어지고 있다. 본 논문에서는 객체 지향 언어인 C++로 만들어진 독립적인 시스템 또는 클라이언트/서버 환경의 시스템을 CORBA를 이용한 분산 객체 프레임웍 환경으로 이주시키는 재공학 시스템 설계를 제안한다. 이 시스템을 이용하여 레거시 시스템을 재공학 하면 신뢰성과 상호 운용성이 높은 프레임적 기반의 소프트웨어 개발을 효과적으로 지원할 수 있다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.485-496
• /
• 2008

As the complexity of SoC (System-on-Chip) design increases dramatically. traditional system performance analysis and verification methods based on RTL (Register Transfer Level) are no more valid for increasing time-to-market pressure. Therefore a new design methodology is desperately required for system verification in early design stages. and hardware software (HW-SW) cosimulation at TLM (Transaction Level Modeling) level has been researched widely for solving this problem. However, most of HW-SW cosimulators support few restricted ion levels only, which makes it difficult to integrate HW-SW cosimulators with different ion levels. To overcome this difficulty, this paper proposes a multipurpose framework for HW SW cosimulation to provide systematic SoC design flow starting from software application design. It supports various design techniques flexibly for each design step, and various HW-SW cosimulators. Since a platform design is possible independently of ion levels and description languages, it allows us to generate simulation models with various ion levels. We verified the proposed framework to model a commercial SoC platform based on an ARM9 processor. It was also proved that this framework could be used for the performance optimization of an MJPEG example up to 44% successfully.

• Korean Journal of Microbiology
• /
• v.51 no.4
• /
• pp.407-418
• /
• 2015

This study is focused on establishing the optimal conditions to enhance the production of antilisterial substances by Lactobacillus paracasei BK57 isolated from Baikkimchi. In addition, the growth and in situ lactic acid and bacteriocin production of this strain were investigated during the manufacture of fresh cheese. And then the efficacy of using Lactobacillus starter as a protective culture to improve the safety of fresh cheese against Listeria monocytogenes KCTC 3569 was estimated. Maximum growth rate and activity of antibacterial substances were obtained in Lactobacilli MRS broth at $37^{\circ}C$ with controlled pH 6.0 after 30 h of incubation under aerobic condition. However, the growth rate and antimicrobial activity of bacteriocin produced in whole milk supplemented with yeast extract (2.0%) as a substrate were lower than those obtained in MRS broth. Live cells and cell-free culture supernatant of BK57 strain were effective in the suppression of L. monocytogenes in milk, whereas the inhibitory of the bacteriocin obtained from BK57 strain was higher in BHI broth than in milk. During storage at $4^{\circ}C$ and $15^{\circ}C$ for 6 days, no significant difference was found in the cell viability and antimicrobial activity of BK 57 strain in fresh cheese. In samples held at two temperatures, there was at least a 15% reduction in the numbers of the pathogen in fresh cheese artificially contaminated with approximately $10^5CFU/ml$ of L. monocytogenes within 6 days. Our results demonstrated the usefulness of L. paracasei BK57 having antilisterial activity as a biopreservative in the cheese making process.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1177-1188
• /
• 2002

To classify real time Lead pin images in this paper, The image acquisition system was composed to C.C.D, image frame grabber(DT3153), P.C(PentiumIII). I proposed image processing algorithms. This algorithms were composed to real time monitoring, Lead Pin image acquisition, image noise deletion, object area detection, point detection and pattern classification algorithm. The raw images were acquired from Lead pin images using the system. The result images were obtained from raw images by image processing algorithms. In implemental result, The right recognition was 97 of 100 acceptable products, 95 of 100 defective products. The recognition rate was 96% for total 200 Lead Pins.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.109-115
• /
• 2013

In this study, a variable swash plate compressor has been used in a vehicle to improve its fuel efficiency. To manufacture the swash plate, either SCM 435 or UNS C67300 was used. The effects of using different materials for the structural reliability of compressor have been investigated. Static analysis was carried out on swash plate A/C compressor by using commercial software ANSYS 13.0v. The results showed that the Max. stress occurred on the swash plate made of UNS C67300 was lower than that made of SCM435, which indicated that UNS C67300 is more suitable for producing the safe swash plate.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.161-167
• /
• 2008

A method to compute the size of packet and the optimal way to transmit the packets are proposed in this work for the VoIP communication using the MIL-STD-188-220C, military wireless Ad-hoc protocol which is used for the amicable communications of both speeches and data between several radiotelegraph. The expected time of data transmission is estimated beforehand, and then the size of package and transmission method are decided in the consideration of VoIP speech quality for the users as well as the data transmission quality of radiotelegraph.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.403-408
• /
• 2005

In recent years, vehicle accessories substitute steel for aluminum. But, subframe play a important role of vehicle safety. Therefore, dynamic characteristic of steel subframe is understood at real vehicle. And this is able to apply dynamic characteristic of Aluminum. At this paper, we confirm dynamic load that is operated Steel subframe with experiment And result of finite element analysis which is operated dynamic load is compared with result of experiment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.316-323
• /
• 2005

본 연구는 비교구매의 효과성 측정을 위한 프레임워크를 제시하고 이를 통해 비교구매의 역할과 효과성을 설명한다. 또한 판매자 주도형 비교도전이 보다 효율적인 비교구매 정보의 제공 방법임을 증명한다. 구매자의 구매만족도(S)는 판매자의 제품경쟁력 벡터(P)와 구매자의 제품정보 인지수준 벡터(B)간의 상호작용으로 정의할 수 있으며, 구매자의 제품정보 인지수준은 제품 정보분석을 통한 제품간의 비교행렬(C)에 의해 변화된다. 비교구매 효과성은 비교 전과 후의 구매만족도의 변화량으로 측정되며, 비교구매의 역할은 비교행렬을 제공해 구매자의 제품정보 인지수준을 변화시키는 것이다. 보다 효율적인 방법은 판매자가 비교행렬의 구성요소 중에서 비교 효과성이 큰 경쟁 제품들에 능동적으로 비교하도록 하는 비교도전방법이다. 예제실험을 통해 비교구매가 9.32%, 비교도전이 19.11%의 효과성 결과를 보였으며, 도출된 비교도전 전략으로 효과성은 더욱 향상되었다.