• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.366-374
• /
• 2009

ITU has considered the 3,400$\sim$4,200 MHz band, which is allocated worldwide on a primary basis to the FSS, as a candidate band for future development of IMT system. In this band, this paper presents the results of the sharing studies performed between FSS and IMT systems through the theoretical and simulation analysis on the interference from multiple IMT base stations into a receiving FSS earth station considering the interference mitigation techniques such as antenna tilt angle and 3 sectors on the IMT base station. By using the long-term and short-term interference threshold, the coordination areas for the FSS earth station are provided to share frequency in 3,400$\sim$4,200 MHz band between FSS earth station and multiple IMT base stations in future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1433-1443
• /
• 2004

The power line modem proposed in this paper transmits the remote control signal using CSK(Code Shift Keying) and DS/SS method. The CSK technique provides the increased capacity of transmission and robustness towards noise. Besides, the DS/SS technique provides protection against narrow-band Gaussian interference and multi-path interference. The modem supports full-duplex communication using FDD(Frequency Division Duplex) and the modem structure for forward link is same with that for reverse link. To switch each sub-controlled unit smoothly, 4/$\pi$-DQPSK is adopted for noncoherent demodulation. The PN code for spreading spectrum seues to divide each group which consists of sub-controlled units and Walsh code is used for the M-ary CSK technique. Each block is designed and verified with TMS320C5402 DSP. We show the superiority of the proposed method by analyzing numerically the system performance for the factors of the DS/SS and CSK method ullder additive white Gaussian noise and PBI.

• Journal of Advanced Navigation Technology
• /
• v.13 no.6
• /
• pp.907-915
• /
• 2009

Spectrum sharing between wireless systems becomes a critical issue due to emerging new technologies and spectrum shortage. Recently, IMT system has been allocated in the same frequency C band (3400-4200MHz) along with FSS services on co-primary basis, which means that harmful interference probability may be inspired. In this paper, to estimate the spectrum sharing between IMT and FSS systems, the minimum separation distances have been evaluated considering major factors such as the clutter loss in some areas and the elevation angle of FSS earth station, and using I/N=-10dB which is fundamental criterion for coexistence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.15-20
• /
• 2012

In this paper, an algorithm that enhances the conventional directional CSMA/CA protocol in IEEE 802.15.3c is proposed under saturation environments. For the algorithm, a Markov chain model is presented and analyzed in no-ACK mode. The effects of directional antennas and the features of IEEE 802.15.3c MAC are considered in the model. The optimal sizes of contention window are derived from the numerical results. The numerical results show that the proposed directional CSMA/CA algorithm outperforms conventional one. The overall analysis is verified by simulation. The obtained results provide the criterion for selecting the optimal parameters and developing a MAC protocol that enhances the performance of mmWave WPANs.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.81-85
• /
• 2000

마이크로파대역에서 우수한 유전적 특성을 가지며 소결이 90$0^{\circ}C$ 이하에서 가능하여 Ag와 동시 소결이 가능한 유전체 조성을 개발하여 RF MCM-C(Multi-chip Module on Ceramic) 제조를 위한 유전체 테잎 제조에 대한 기초적인 실험과 Ag 전극과 동시소성에 대한 반응성 실험을 하였다. 본 실험에 앞서 개발된 유전체 조성의 마이크로대역에서의 유전특성은 유전율 24, 품질계수 30,000 이상, 공진주파수 온도계수 37 ppm/$^{\circ}C$ 이었고 소결온도는 85$0^{\circ}C$이었다. 이 유전체를 이용결함 없는 테잎 제조를 위한 유기용매의 선택, 바인더 및 가소제의 량 및 비에 따른 테잎의 소결 전 .후의 상태를 비교.분석하여 최적의 조성비를 결정하였다. 테잎과 은전극과의 반응성 실험결과 은과 유전체의 상호확산은 거의 이루어지지 않음을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.379-385
• /
• 2002

In this paper, frequency trifler fur 8 GHz local oscillator was designed and fabricated using MESFET. The third order harmonic was generated by biasing the transistor on A class. The fundamental frequency and the second harmonic were suppressed by using λ$\_$g//2 stub and band pass filter. As results, conversion gain of 2.67 ㏈ at 8.31 GHz, the harmonic suppression of -41.17 ㏈c, the bandwidth of 510 ㎒ were measured.red.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.227-230
• /
• 2000

본 논문에서는 외부방사 문제에 널리 사용되는 음향경계 요소 법(Acoustic Boundary Element Method)을 확장하여 저주파수 대역은 기존의 방법을 이용하고 고주파수 대역에서는 경계요소의 특성길이에 의한 고주파수 상한을 극복할 수 있는 방법을 제시한다. 밴드를 대표하는 음압 레벨을 직접 계산하도록 상호상관도 가정을 통하여 간략화 하였다. 간단한 음향방사 모델인 배플이 있는 빔과 평판에 대하여 Rayleigh 적분식의 계산결과와 제안된 방법을 비교하여 적용효능성을 검토하였다. 적용을 위한 조건으로는 방사면 진동의 상호상관도가 작아야 하므로, 이를 만족시키기 위한 일반적인 조건식을 제시하여 이로부터 경계요소의 특성길이를 정하는 기준을 제시하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.697-700
• /
• 2005

일반적으로 고주파인 위성신호를 수신하려면 전송로상의 손실이 생기는데 이러한 손실을 거치지 않고 위성신호를 직접수신하여 고주파대역의 신호의 손실을 줄이기 일반적으로는 도파관을 사용하여야 하나 동관을 이용하여 12GHz${\sim}$20GHz 대역을 통과하는 전파의 특성을 측정하였고 11.71GHz${\sim}$12.01GHz 대에서는 측정이 되지 않는 차단 주파수 현상을 보였으며 13GHz 이상의 주파수에서는 원하는 신호가 측정되었다. 측정 장비로는 Aglient 사의 Network Analyzer에서 11GHz 이상의 신호를 만들어 각각 5C HFBT, 10C HFBT Cable과 동관으로 보낸후 Spectrum Analyzer로 들어오는 신호를 측정하였으며 이에 따른 전송 특성을 분석 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.707-713
• /
• 2007

This paper implements a RFID multi-band multi-protocol reader platform, possible to select one of the UHF bands used in particular for distribution system in RFID, that is, from 860MHz to 960MHz, through programmable configuration. It also enables implemented platform in this paper to recognize many kinds of TAG protocol, such as EPC Class 1 GEN 1, Class 1 Gen2, ISO 18000-6A, B and C.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.213-221
• /
• 2004

A new method for design of two-channel finite-impulse response(FIR) quadrature mirror-image filter(QMF) banks with low reconstruction delay using weighting function is proposed. The weighting function used in this paper is calculated from the previous updated filter coefficients vector which is adjusted from iteration to iteration in the design of QMF banks. In this paper, passband and stopband edge frequency are used in design of QMF banks with low delay characteristic in time domain instead of specific frequency interval where the artifacts occur in conventional design method. The investigation of specific frequency interval where artifacts occur can not be required by using passband and stopband edge frequency. Some comparisons of performance are made with other existing design method to demonstrate the proposed method for QMF bank design. and it was observed that the proposed method using the weighted function and passband and stopband edge frequency improves the peak reconstruction error by 0.001 [dB], the peak-to-peak passband ripple by 0.003[dB], SNR with a white noise by 7[dB] and SNR with a step input by 32[dB], but with a reduction of the computational efficiency because of updating the weighting function over the conventional method in Ref [11].