• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.639-643
• /
• 2008

STATEMENT OF PROBLEM: The degree of conversion may influence the ultimate mechanical and physical properties of provisional crown and fixed partial denture materials. The high levels of the unreacted residual monomer may cause deleterious effect on the properties. PURPOSE: The purpose of this study was to measure the degree of conversion of bis-acrylic based provisional crown and fixed partial denture materials by using an infrared spectroscopic method. MATERIAL AND METHODS: Chemically activated three bis-acrylic based provisional crown and fixed partial denture materials, LuxaTemp [DMG, Hamburg, Germany], fast set TemPhase [Kerr, Orange, CA, USA] and Protemp 3 Garant [3M-ESPE, St Paul, MN, USA], were investigated by Fourier transform infrared spectrometry (FTIR). The FTIR spectra of the materials tested were immediately obtained after mixing. The specimens were stored under dry conditions and at $23^{\circ}C$ for 24 hours, and then the spectra of the materials were also obtained. The degree of conversion (%) was calculated from the spectrum of the absorbance between the aliphatic double bond at 1637 $cm^{-1}$ and the aromatic double bond at 1608 $cm^{-1}$ using the baseline method. The data were statistically analyzed using one-way ANOVA and the multiple comparison Scheffe test at the significance level of 0.05. RESULTS: The mean value and standard deviation of the degree of conversion were 52.5 % ${\pm}$ 1.1 %, 50.3 % ${\pm}$ 0.8 %, and 42.3 % ${\pm}$ 4.9 % for LuxaTemp, Protemp 3 Garant and fast set TemPhase, respectively. There was no significant difference between LuxaTemp and Protemp 3 Garant, whereas there was a statistically difference between Protemp 3 Garant and fast set TemPhase, and LuxaTemp and fast set TemPhase (P < .05). CONCLUSION: The degree of conversion of fast set TemPhase was significantly lower than those of the others. The degree of conversion may be correlated with the rate of polymerization.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.2
• /
• pp.357-363
• /
• 1995

Disbond size of adhesively bonded single lap and double lap joints CFRP composite specimens has been evaluated using acousto-ultrasonic(AU) technique. Frequency spectra for all specimens were obtained by measuring peak amplitude of the stress wave propagated through the bond-lines. By analyzing these frequency spectra, peak amplitude was found to be proportional to fractional bonding area and to be maxima at the fundamental and the third order higher harmonic frequencies of specimen thickness mode. The disbond size can be evaluated quantitatively and this technique can be applied to real structures if the reference specimens are prepared in advancve.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.423-430
• /
• 1993

New Palladium(0)-olefin complexes, $(PMe_3)_2Pd{CH_2=C(CH_3)COOH} \;and\;(PMe_3)_2Pd{(CH_3)CH=CHCOOH}$ have been prepared by treating $Pd(PMe_3)_2$(styrene) with methacrylic acid and trans-crotonic acid, respectively. These complexes were characterized by elemental analysis, IR and $^1H-,\;^{13}C-,\;and\;^{31}P$-NMR spectroscopy. The carboxylic acid entity was found non-bonded with palladium while ${\pi}$-bond is formed between the olefin double bond and Pd(0). The results are compared with the metallacycle formation the reaction of Pd(PMe3)2(styrene) with 3-butenoic acid.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.186-186
• /
• 2011

[100] 방향으로 4$^{\circ}$ 기울어진 Si(001)-2${\times}$1(vicinal surface)을 초고진공하(UHV)에서 청결하게 하고 열처리하면 rebonded-atom을 가진 DB double step과 이 step에 나란한 아홉 개의 dimer를 가진 평균 폭이 4.0 nm인 single-domain의 (001)-2${\times}$1 테라스의 면으로 재구조된다 [그림 a]. 본 연구에서는 이 표면 위에 Sb을 상온에서 증착하여 덮고 후열처리하면(2 ML, 500$^{\circ}C$ 10 분), Sb-dimer가 Si 표면을 한 층 덮고 (001) 테라스의 Sb-dimer 방향이 DA double-step과 수직을 이루는 1${\times}$2 구조를 이룬다는 사실을 STM으로 확인하였다 [그림 b]. 이러한 Sb-passivation의 효과는 표면 Si-dimer의 부분적으로 채워진 dangling-bond를 Sb-dimer의 완전히 채워진 고립쌍(lone-pair)으로 바꿈으로써 표면 자유 에너지를 줄이고, 나아가 계면 Si 층은 bulk에 유사하게 되는 데에 있다. 이 passivation 된 표면은 Ge/Si 등의 heteroepitaxy에 사용할 수 있고, 특히 single-domain을 유지하며 step 방향에 대해 평행인 dimer-row로 이루어져 있어서 원자나 전자의 이동에 비등방적 효과를 증가시킬 것이 예측된다.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.487-490
• /
• 1993

A semiempirical methods (PM3-CI-UHF. etc.) for the evaluation of ground and excited state electronic structures of psoralens are applied to angelicin with thymine. The photocycloaddition reaction of angelicin with thymine were deduced to be formed by their preferable HSOMO-LUMO interactions. The photoadduct was inferred to be a C$_{4-}$cycloaddition product with the stereochemistry of cis-anti formed through [2+2] addition reaction between, the 3,4 double bonds of angelicin and the 5,6-double bond of thymine.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.257-264
• /
• 1998

5-Methylthebaine was obtained by treating thebaine with n-butyllithium and methylfluorosulfonate. Hetero Diels-Alder reaction of thebaine and 5-methylthebaine with trifluoroacet aldehyde afforded 14-${\beta}$-(triflu-oro-2-hydroxyethyl)codeine (2) and 14-${\beta}$-(trifluoro-2-hydroxyethyl)-5-methylcodeinone (9). 6-${\alpha}$-OH compound (4) was obtained by employing $CeCl_2$ and $NaBH_4$. After synthesized a derivative substituted for 3-OH (5), using boron tribromied, We synthesized a new derivative that make double bond in C-7, C-8 into epoxode (6), (10). Through inspecting an influence on structure-activity and analgetic action, we are going to examine which opiold acceptor has a selectivity.

• The Korean Journal of Mycology
• /
• v.17 no.4
• /
• pp.202-208
• /
• 1989

The photochemical reaction of harmaline and N-methylmaleimide has been investigated by spectroscopic methods. A photoproduct was isolated from the irradiation mixture of harmaline and N-methylmaleimide. Spectroscopic results suggested that the amine group of harmaline was added photochemically to the double C=C bond of N-methylmaleimide. This synthesized harmaline derivative has a biological toxicity, because it inhibits the growth of some yeasts and photosynthetic bacteria.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.84-89
• /
• 1996

The Oxidation of aflatoxin $G_1$ ($AFG_1$) with ozone in chloroform solvent gave the stable ozonide into ozonization of the double bond in the terminal furan ring, and this reaction have been carried out for 3hr at -78. 5$^{\circ}C$. The chloroform solvent was removed in a stream of nitrogen and the residue was separated by elution chromatography(EC). The structure of this compound have been identified by using MS, $^1H-NMR$, $^l3C-NMR$ and I. R spectroscopy, respectively. This compound was formed the normal stable AFG$_1$-ozonide into spontaneous rearrangement after unstable ozonide according to sigmatropic rearrange ment dependent upon cyclo addition by ozone.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.311-314
• /
• 1986

A series of tetramethyl 1-substituted benzyl-3a,7a-dihydro-1H-indole-2,3,3a,4-tetracarboxylates were prepared and their reactions with bromine were examined. The initial reaction seemed to be the formation of the intermediate N-bromo quaternary ammonium bromide. This intermediate underwent aromatization with loss of the 3a-methoxycarbonyl group. Bromine replaced the N-substituent of the p-methoxybenzyl compound and addition of bromine occurred across the $C_6-C_7$ double bond of the indole ring. Bromination of the benzyl ring and aromatization occurred for the m-methoxybenzyl compound.