• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.514-521
• /
• 2018

COSPAS-SARSAT 406 MHz emergency beacons include ELTs for aviation, EPIRBs for maritime, and PLBs for individuals in distress. They are used to sending messages encoded on 406 MHzdistress frequency and sending alertsfor search and rescue in distress. C/S T.001 and T.018 are COSPAS-SARSAT technical documents. They include basic technical information needed for developing beacons, howmessages are constructed, and test methods for type approval. COSPAS-SARSAT systems that use existing low earth orbit (LEO) and geostationary earth orbit (GEO) satellites do not have a return link service (RLS). So, the survivors could not confirm whether the distress signal was sending or not. However, a new medium earth orbit (MEO)satellite system has been added to thissystem, allowing confirmation through the RLS function. This paper analyzed C/S T.001 and T.018 needed to develop navigation structuresthat incorporated improved PLB of 406 MHz, a homing signal generator of 121.5 MHz, and a VHF AM transmitter for aviation of 243 MHz.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1432-1437
• /
• 2018

This work investigated edge-cracking behavior of equiatomic CoCrFeMnNi high-entropy alloy during hot rolling at rolling temperatures $500{\leq}T_R{\leq}1000^{\circ}C$. Edge cracks did not form in the material rolled at $500^{\circ}C$, but widened and deepened into the inside of plate as $T_R$ increased from $500^{\circ}C$. Edge cracks were most severe in the material rolled at $1000^{\circ}C$. Mn-Cr-O type non-metallic inclusion and oxidation were identified as major factors that caused edge cracking. The inclusions near edge region acted as preferential sites for crack formation. Connection between inclusion cracks and surface cracks induced edge cracking. Rolling at $T_R{\geq}600^{\circ}C$ generated distinct inclusion cracks whereas they were not serious at $T_R=500^{\circ}C$, so noticeable edge cracks formed at $T_R{\geq}600^{\circ}C$. At $T_R=1000^{\circ}C$, significant oxidation occurred at the crack surface. This accelerated edge crack penetration by embrittling the crack tip, so severe edge cracking occurred at $T_R=1000^{\circ}C$.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.18-22
• /
• 2006

We obtained in-situ $MgB_2$ thin films in an one-step process using ESSD (Evaporation Sputtering Simultaneous Deposition) method. In our approach. the Ma evaporator is designed specially Mg and B are simultaneously evaporated and sputtered, respectively, in the specially designed ESSD chamber. The background pressure was less than $1{\times}10^{-6}$ Torr. The substrate temperature was kept at 623 K. The film properties were investigated by both electrical resistivity and PPMS. As a result, typical $T_c$ of films was 11 K.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1256-1261
• /
• 2018

Both thermoplastic formability and electrical conductivity of Al-Ni-Y metallic glass with 12 different compositions have been investigated in the present study with an aim to apply as a functional material, i.e. as a binder of Ag powders in Ag paste for silicon solar cell. The thermoplastic formability is basically influenced by thermal stability and fragility of supercooled liquid which can be reflected by the temperature range for the supercooled liquid region (${\Delta}T_x$) and the difference in specific heat between the frozen glass state and the supercooled liquid state (${\Delta}C_p$). The measured ${\Delta}T_x$ and ${\Delta}C_p$ values show a strong composition dependence. However, the composition showing the highest ${\Delta}T_x$ and ${\Delta}C_p$ does not correspond to the composition with the highest amount of Ni and Y. It is considered that higher ${\Delta}T_x$ and ${\Delta}C_p$ may be related to enhancement of icosahedral SRO near $T_g$ during cooling. On the other hand, electrical resistivity varies with the change of Al contents as well as with the change of the volume fraction of each phase after crystallization. The composition range with the optimum combination of thermoplastic formability and electrical conductivity in Al-Ni-Y system located inside the composition triangle whose vertices compositions are $Al_{87}Ni_3Y_{10}$, $Al_{85}Ni_5Y_{10}$, and $Al_{86}Ni_5Y_9$.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2296-2302
• /
• 2018

Internally plasticized PVC was prepared via chemical reaction of azide PVC and alkynyl group containing castor oil methyl ester. The chemical structure of alkynyl group containing castor oil methyl ester and internally plasticized PVC was characterized with FT-IR and $^1H$ NMR. Properties of internally plasticized PVC, including thermal stability, tensile tests and resistance to extraction in different solvents, was investigated. The results showed that alkynyl group containing castor oil methyl ester, as internal plasticizer of PVC, not only decreased the $T_g$ of PVC from $84.6^{\circ}C$ to $41.6^{\circ}C$ efficiently, but also presented no plasticizer loss in five different solvents. The tensile tests showed that elongation at break and tensile strength of internally plasticized PVC was 353.8% and 18.1 MPa. The internally plasticized PVC has potential application in replacing the traditional PVC material in PVC products with high durability.

• Electrical & Electronic Materials
• /
• v.11 no.10
• /
• pp.53-59
• /
• 1998

Paraelectric lead landthanum titanate(PLT) thin films have been prepared by a reactive dc magnetron sputtering system using a multicomponent metal target. The surface area control of each element on the target markedly facilitates the fabrication of thin films of complex ceramic compounds. A postdeposition heat-treatment was applied to all as-deposited PLT thin films at annealing temperatures up to 75$0^{\circ}C$ for crystalization. The composition of the PLT(28) thin filmannealed at $650^{\circ}C$ was: Pb, 0.73; La, 0.28; Ti, 0.88; O, 2.9. The dielectric constant and dissipation factor of the thin film(200 nm) at low filed measurements (500 Vcm-1) are 1216 and 0.018, respectively. The charge storage density using a typical Sawyer-Tower circuit with a 500 Hz sine wave was 12.5 $\mu$Ccm-2 at the electric field of 200 kVcm-1.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.2
• /
• pp.221-225
• /
• 2005

An in vitro study was conducted to examine the effect of monensin or fish oil addition on bio-hydrogenation of $C_{18^-} unsaturated fatty acids and CLA production by mixed ruminal bacteria when incubated with safflower oil. Commercially manufactured concentrate (1%, w/v) with safflower oil (0.2%, w/v) were added to mixed solution (600 ml) of strained rumen fluid and McDougalls artificial saliva (control). Monensin $Rumensin^{(R)}$, 10 ppm, w/v, MO), mixed fish oil (0.02%, w/v, absorbed to 0.2 g alfalfa hay, FO) or similar amounts of monensin and fish oil (MO+FO) to MO and FO was also added into the control solution. All the culture solutions prepared were incubated in the culture jar anaerobically at $39^{\circ}C$ up to 12 h. Higher pH (p<0.047) and ammonia concentration (p<0.042) were observed from the culture solution containing MO at 12 h incubation than those from the culture solutions of control or FO. The MO supplementation increased (p<0.0001-0.007) propionate proportion of culture solution but reduced butyrate proportion at 6 h (p<0.018) and 12 h (p<0.001) of incubations. Supplementation of MO or MO+FO increased (p<0.001) the proportions of $C_{18:2}$. The MO alone reduced (p<0.022-0.025) the proportion of c9,t11-CLA compared to FO in all incubation times. The FO supplementation increased the proportion of c9,t11-CLA. An additive effect of MO to FO in the production of c9,t11-CLA was observed at 6 h incubation. In vitro supplementation of monensin reduced hydrogenation of $C_{18^-}$UFAs while fish oil supplementation increased the production of CLA.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2496-2503
• /
• 2018

The short-term stability of high efficiency polymer : nonfullerene solar cells was investigated by employing a quick (ten cycles) current density-voltage (J-V) cycling method. Polymer : nonfullerene solar cells with initial power conversion efficiency (PCE) of >10% were fabricated using bulk heterojunction (BHJ) films of poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5,7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) and 3,9-bis(2-methylene-((3-(1,1-dicyanomethylene)-6/7-methyl)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). One set of the BHJ (PBDB-T : IT-M) films was thermally annealed at $160^{\circ}C$ for 30min, while another set was used without any thermal treatment after spin-coating. The quick J-V scan (cycling) measurement disclosed that the PCE decay was relatively slower for the annealed BHJ layers than the unannealed (as-cast) BHJ layers. As a result, after ten cycles, the annealed BHJ layers delivered higher PCE than the unannealed BHJ layers due to higher and more stable trend in fill factor. The present quick J-V cycling method is simple but expected to be useful for the prediction of short-term stability in organic solar cells.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.271-279
• /
• 2018

This study attempted to identify and the relationship between death consciousness and awareness of good death of nursing students who have experienced clinical practice. The data collection was conducted for a total of 205 students from June 1 to June 15, 2018, who are 111 students in third grade and 94 students in fourth grade at S City of C university. Death consciousness and awareness of good death were both normal. Death consciousness according to general characteristics was the experience of thought about death(t=.559, p=.002), and awareness of good death was death education(t=.777, p=.018) and statistically significant difference in understanding death(F=2.964, p=.033). There was a positive correlation between grade and awareness of good death(r=.161, p=.021), but there was no correlation between death consciousness and awareness of good death(r=-.71, p=.311). As a result of this study, it was able to understand the death consciousness and awareness of good death, the importance of death thought and death education of nursing college students who experienced clinical practice, and the needed to repeated research for nursing education and relationship confirmation to improve the death consciousness and awareness of good death.