• Journal of Aquaculture
• /
• v.9 no.4
• /
• pp.339-344
• /
• 1996

The effect of temperature ($24\~36^{\circ}C$ and salinities ($5\~30$ ppt) on hatching rate of the resting egg of the Korean rotifer, Brachionus plicatilis was investigated. The highest hatching rate of the resting egg was $85.7\%$ at $28^{\circ}C$ and 15 ppt. The hatching rates of the resting eggs with salinities were not significant at $326{\circ}C$ and $36^{\circ}C$. Hatching was faster at higher temperature. The resting eggs stored at $5^{\circ}C$ in dark hatched simultaneously within two days, however, those at $28^{\circ}C$ in dark hatched intermittently within 14 days. But, final hatching rate of the resting egg at $28^{\circ}C$ was higher at $28^{\circ}C$ than that at $5^{\circ}C$. With regard to drying temperature and time of resting egg, the resting egg dried at $30^{\circ}C$ for 1 hour showed the highest hatching rate ($46.4\%$).

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.827-830
• /
• 2000

3GPP and ETSI adopted AMR(Adaptive Multi-Rate) as a standard for next generation IMT-2000 service. In this paper, we analyzed algorithm about AMR and optimized ANSI C source on the C complier and assembly language of Texas Instrument . The implemented AMR speech codec requires 28.2MIPS of complexity for encoder and 5.5MIPS for decoder. we performed real-time implementation of AMR speech codec using 82% of TMS320C5402 with 40 MIPS specification. We give proof that the output speech of the implemented speech codec on DSP board is identical with result of C source program simulation. Also the reconstructed speech is verified in the real-time environment consisted of microphone and speaker.

• Fisheries and Aquatic Sciences
• /
• v.6 no.2
• /
• pp.66-73
• /
• 2003

To understand the physiology of a suspension-feeding bivalve and its potential impacts on the dynamics of red tides on tidal flats, rates of clearance and ingestion of Glauconome chinensis were measured as a function of algal concentration, when the bivalve was fed on a nontoxic strain of red tide dinoflagellate Prorocentrum minimum, Cochlodinium polykrikoides or Scrippsiella trochoidea. With increasing algal concentration, weight-specific clearance rate increased rapidly at lower concentrations and after reaching the maximum at ca. 0.2 to 1.0 mgC/L, it decreased at higher concentrations. Maximum clearance rate was nearly equal for different algal species and ranged between 2.1 and 2.6 L/g/hr. Weight-specific ingestion rate also increased at lower algal concentrations but saturated at higher concentrations. Maximum ingestion rate was 2 to 10 fold different with different algal species: S. trochoidea (10.1 mgC/g/hr), P. minimum (3.9 mgC/g/hr), and C. polykrikoides (0.99 mgC/g/hr). Nitrogen and protein content showed that S. trochoidea is the best among the tested three red tide dinoflagellates. The maximum filtration capacity, calculated by combining the data on ingestion rate from laboratory experiments and those from the field for the density of the bivalve and the red tide dinoflagellates was 4.7, 1.4, and 25.3 tons/m2/day for P. minimum, C. polykrikoides, and S. trochoidea, respectively. It is hypothesized that the abundant suspension-feeding bivalves in tidal flats can effectively mitigate the outbreak of red tides.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.456-459
• /
• 2005

Continuous cooling transformation behaviors were studied fur low carbon HSLA steels containing three different level $(1\~3\;wt\%)$ of Ni addition. Thermo-mechanical processing (TMP) simulations to construct continuous cooling (CCT) diagram were conducted by using Gleeble system. As cooling rate increased, pearlite, granular bainite, acicular ferrite, bainitic ferrite and lath martensite were transformed from deformed austenite. Fully bainitic microstructure were developed at all cooling rate condition in high Ni containing steel due to hardenability increasing effects of Ni. Ni also influenced the transformation kinetics. At the slowest cooling rate of $0.3^{\circ}C/s$, transformation delayed with decreasing Ni contents because of the diffusion of substitutional alloy elements. However, cooling rate slightly increased to $1^{\circ}C/s$, transformation kinetics accelerated with decreasing Ni contents because nucleation of bainite was sluggish due to hardening of residual austenite.

• YAKHAK HOEJI
• /
• v.29 no.6
• /
• pp.357-361
• /
• 1985

Two glycosides, assumed to be one of the potential active principles, is isolate from the root bark of Acanthopanax koreanu Nakai, identified to be acanthoside D, $C_{34}H_{46}O_{18}$, mp $242^{\circ}C$, and syringo side, $C_{17}H_{24}O_{9}$ mp $192^{\circ}C$. Acanthoside D has been found to have s-GPT, s-GOT lowering effect, BSP-retention rate and survival rate in the toxic state through the bio-pharmacological experiments.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.381-383
• /
• 2006

The hatching rate of the eggs of Nannophya pygmaea Rambur, an endangered dragonfly species in Korea, was experimented in different temperature conditions ($10,\;15,\;20,\;25,\;and\;30^{\circ}C$) in laboratory. N. pygmaea eggs were collected from female adults inhabited a small wetland in Mungyong-si, Kyeongsangbuk-do, Korea, in July 2006. The hatching rate was evaluated from the number of hatched nymphs for the period of 100 days. As a result, the hatching rates were 83, 89, and 76% at $20,\;25,\;and\;30^{\circ}C$, respectively; however, eggs were not hatched at $10^{\circ}C\;and\;15^{\circ}C$ during the experiment period. The derived thermal threshold for egg hatching was $14.3^{\circ}C$, which is relatively higher than the values of other temperate dragonflies.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.347-355
• /
• 2015

The growth kinetics of phototrophic microorganisms can be controlled by the light irradiance, the concentration of an inorganic nutrient, or both. A multi-component kinetic model is proposed and tested in novel batch experiments that allow the kinetic parameters for each factor to be estimated independently. For the cyanobacterium Synechocystis sp. PCC6803, the estimated parameters are maximum specific growth rate $({\mu}_{max})=2.8/d$, half-maximum-rate light irradiance $(K_L)=11W/m^2$, half-inhibition-rate light irradiance $(K_{L,I})=39W/m^2$, and half-maximum-rate concentration for inorganic carbon $(K_{S,Ci})=0.5mgC/L$, half-maximum-rate concentration for inorganic nitrogen $(K_{S,Ni})=1.4mgN/L$, and half-maximum-rate concentration for inorganic phosphorus $(K_{S,Pi})=0.06mgP/L$. Compared to other phototrophs having ${\mu}max$ estimates, PCC6803 is a fast-growing r-strategist relying on reaction rate. Its half-maximum-rate and half-inhibition rate values identify the ranges of light irradiance and nutrient concentrations that PCC6803 needs to achieve a high specific growth rate to be a sustainable bioenergy source. To gain the advantages of its high maximum specific growth rate, PCC6803 needs to have moderate light illumination ($7-62W/m^2$ for ${\mu}_{syn}{\geq}1/d$) and relatively high nutrient concentrations: $N_i{\geq}2.3 mgN/L$, $P_i{\geq}0.1mgP/L$, and $C_i{\geq}1.0mgC/L$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.589-598
• /
• 1995

Filtering rates of Crassostrea gigas were experimentally investigated with reference to effects of water temperature and size. Absorptiometric determinations of filtering rates with oysters being fed diatom Chaetoceros calcirtans were carried out in a closed system. Optical density of 675nm in path length 100mm cell used as the indication of food particles absorption was appeared directly In proportion with the concentration of diatom pigment $chlorophyll-\alpha$. In the closed system where $C_0$ is $OD_{675}$ at initial time 0, $C_t$, at time t, and Z is the decreasing coefficient of OD as meaning of instantaneous removal speed, then $C_t=C_0{\cdot} e^{-2t}$, $Z=In(C_t/C_0)/t$. On the assumption that the filtering rate is constant, then removal rate per unit time (d) is $d=-e^{-z}$. If t is used to time unit of hour (hr), the filtering rate (FR) in I/hr is given by $FR=V{\cdot}d=V(1-e^{-z})$, where V is the water volume (I) of the experimental vessel. Filtering rate increased as exponential function with increasing temperature while not over critical limit. The critical temperature for filtering rate was assumed to be between $28^{\circ}C$ and $29^{\circ}C$. And the weight exponent for filtering rate is 0.223. The model formula derived from the results as FR, $Ihr^{-1}$ = $Exp(0.208{\cdot}T-4.324){\cdot} (DW)^{0.223}$ (T<29 $^{\circ}C)$ where T is water temperature $(^{\circ}C

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.285-288
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. Tensile tests and R-value tests were carried out at several levels of temperature and strain-rate from $25^{\circ}C$ to $300^{\circ}C$ and 0.16 to 0.00016/s, respectively to obtain the mechanical properties of AZ31B magnesium alloy sheet. The FLD of this material was experimentally obtained by limit dome height tests with the punch velocity of 0.1 and 1.0 mm/s at $250^{\circ}C$. The M-K theory-based FLD predicted using Yld2000-2d yield criterion was compared with the experimental results.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.2
• /
• pp.20-27
• /
• 2004

Kinetic characteristics dependent on several factors such as iron mineral and organic solvents were investigated. When F $e^{0}$ , FeS and Fe $S_2$ were used as mediators, minerals affecting reaction rate were in the following order : $Fe_{0}$ 0/ ＞ FeS ＞ $FeS_2$ when in contact $C_2$C $l_{6}$ . The more chloride substituted, the higher reaction rate were observed. The reaction rates were dependent on pH, shaking rate, temperature and specific surface area. 1, 10-phenanthroline and EDTA degradation rates were fast, indicating that they adsorbed on the surface of the iron which makes the electron transfer reaction easy. Nitrate which has $\pi$＊ orbital of molecular can increase electron transfer rate because it is delocalized in its entity. The reaction rates were not affected by hydroquinone. Degradation rates were much enhanced with naturally occurring kaolinite because of the surface corrosion of Fe mineral. However, The reaction rate was not affected by F $e^{2+}$ or S $O_4$$^{2-}$ presented in solution.n.