• Animal cells and systems
• /
• v.5 no.3
• /
• pp.231-236
• /
• 2001

SINE-R retroposons have been derived from human endogenous retrovirus HERV-K family and found to be hominoid specific. Both SINE-R retroposons and HERV-K family are potentially capable of affecting the expression of closely located genes. From cDNA library of human fetal brain, we identified seven SINE-R retroposons and compared them with sequences derived from GenBank database. The SINE-R retroposons from human feta1 brain showed 85∼97% sequence similarities with the human-specific retroposon SINE-R.C2. They also showed 88∼96% sequence similarities with the sequence of the schizo-cDNA clone that derived from postmortem frontal cortex tissue of a schizophrenic patient. Phylogenetic analysis using the neiqhbor-joining method revealed that the seven new SINE-R retroposons from cDNA library of the human feta1 brain have proliferated independently during human evolution. The data indicate that such SINE-R retroposons are expressed in human fetal brain and deserve further investigation as potential leads to understanding of neuropsychiatric diseases.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.320-334
• /
• 1996

Dental cast and die materials are essential material using in almost dental prsthodontic procedure and it's most important requirement is accuracy for reqorducing the oral anatomical structures. In this study, 5 abutments A, B, C, D, E were fabricated on the metal master model to simulate the arch form and specimens were poured with 4 cast materials. Inter-abutment distances, A-B, A-C, A-D, A-E, B-C, B-D were calculated using the photo-scanning and the deviations from the metal master model were also evaluated. The results were as follows; 1. The distance between A-B, A-C, A-D, A-E, B-C, B-D of the abutments A, B, C, D, E of each cast material was calculated. And after comparing the deviations between the metal master model. $Fujirock^{(R)}$ showed the lowest value with $0.20{\pm}0.22mm$, and the deviation increased in the order of $Suprastone^{(R)}$, Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Epoxy $Die^{(R)}$, Die $Keen^{(R)}$. 2. In each calculation area, the difference in measurements between cast material and metal master model showed singificant difference between A-B and Cross arch measure-ments of A-D, B-D, A-E(p<0.05). 3. The difference in measurements between cast material and metal master model in the A-B area showed $Fujirock^{(R)}$ to be the lowest with $0.05{\pm}0.04$mm and increased in the order of Die $Keen^{(R)}$, $Suprastone^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and $Suprastone^{(R)}$, Epoxy $Die^{(R)}$ (p<0.05). 4. The difference in measurements between cast material and metal master model in the B-C area showed $Fujirock^{(R)}$ to bo the lowest with $0.17{\pm}0.11$mm and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$, Epoxy $Dies^{(R)}$. There was significant difference between $Fujirock^{(R)}$ and Die $Keen^{(R)}$, Epoxy $Die^{(R)}$(p<0.05). 5. The difference in measurements between cast material and metal master model in the B-D area showed $Fujirock^{(R)}$ to bo the lowest with $0.13{\pm}0.07$mm, Epoxy $Dies^{(R)}$and increased in the order of $Suprastone^{(R)}$, Die $Keen^{(R)}$. There was significant difference between $Fuji-rock^{(R)}$ and Die Keen(p<0.05). 6. In this experiment, Epoxy $Dies^{(R)}$ showed mean contraction in every calculation area. And when reconstruction cross arch restorations it is thought that distortion should be considered in every cast material.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.10
• /
• pp.726-734
• /
• 2007

In this study, lower flammability limits (LFLs) of three hydrocarbon refrigerants (R600a, R290, R1270) and two hydrofluorocarbon refrigerants (R152a, R32) and DME (RE170) are measured by the method proposed by ASTM E681-04 Standard. Flammability tests are carried out at three temperatures of $23^{\circ}C,\;60^{\circ}C\;and\;100^{\circ}C$ and relative humidity 50%. Test results show that the present data for isobutane and propane obtained at $23^{\circ}C$ are similar to those found in the literature, confirming indirectly the reliability of the present test method and facility. For propylene, R152a, and R32, LFLs found in the literature differ considerably. Especially, the deviation of LFL of propylene is more than 30% among the literature data. The present data for propylene, R152a, and R32 agree with either of the data sets available. As the temperature increases from $23^{\circ}C\;to\;100^{\circ}C$, LFLs of all refrigerants tested decrease. LFLs of most refrigerants tested in this study at $60^{\circ}C$ decrease by $0.1{\sim}0.3%$ as compared to those at $23^{\circ}C$. Also LFLs of most refrigerants tested in this study at $100^{\circ}C$ decrease by $0.1{\sim}0.3%$ as compared to those at $60^{\circ}C$.

• The Korean Journal of Mycology
• /
• v.46 no.4
• /
• pp.467-477
• /
• 2018

Colletotrichum circinans, an anthracnose pathogen, causes serious damage to onions worldwide. In this study, specific molecular markers were developed to detect C. circinans accurately and quickly with both conventional and real-time PCR methods. The cirTef-F/cirTef-R and cirTu-F/cirTu-R primer sets, which are specific for C. circinans, were constructed by analyzing $tef-1{\alpha}$ and ${\beta}-tubulin$ genes in the fungus. Using the conventional PCR method, 100 pg and 1 ng of fungal DNA could be detected using the cirTef-F/cirTef-R and cirTu-F/cirTu-R sets, respectively. Using the real-time PCR method, 10 pg and 100 pg of fungal DNA could be detected more sensitively with the cirTef-F/cirTef-R and cirTu-F/cirTu-R sets, respectively. Detection of C. circinans from the artificially infected onion seeds was possible by using both conventional and real-time PCR methods and the developed cirTef-F/cirTef-R primer set. The PCR markers specific for C. circinans developed in this study may enhance the efficiency of fungal pathogen detection in imported vegetables and seeds.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.223-232
• /
• 2003

The co-precipitation method is applied to synthesize the cathode material Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$ for lithium rechargeable batteries at $650^{\circ}C$ (CR650) and 8$50^{\circ}C$ (CR850), respectively. Rietveld indices indicate that $R_{wp}$ with respect to $R_{exp}$ ( $R_{wp}$/ $R_{exp}$) are 9.2%/10.1% for CR650 and 15.9%/9.76% for CR850, respectively. $R_{B}$ and S (GofF) shows 10.9%, 8.54% and 1.9, 1.6, respectively. Rietveld structure refinement reveals that layer structure of LiMn $O_2$ (R3m) coexists with lower symmetry of Li[L $i_{1}$3/M $n_{2}$3/] $O_2$ (C2/c) due to superlattice ordering of Li and Mn in metal-transition containing layers. Unit-cell parameters are calculated as a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(l)$\AA^3$ for CR650, and a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$ for CR850. Final chemistry is obtained as Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$ (CR650) and Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$ (CR850), respectively.y...y..vely.y...y..

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.3
• /
• pp.9-18
• /
• 1979

In this paper, we fabricated a samiconductor C. T. R.(Critical Temperature Resisthor) using vanadium-oxides as material and measured its electrical characteustics. Experimental results are as follows; (1) The abrupt resistance change coefficient of the fabricated C. T, R., , is approximately 3 and (2) the value of depends largely on the reducing time and quenching time and also (3) the C. T, R. with larger value of has shorter switching time.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.328-333
• /
• 1996

Concrete can be defective for several reasons, including an inadequate design, material selection of workmanship, failure to appreciate the hazards associated with prevailing enviromental conditions. Concrete can also deteriorate or be damaged in use. Thus, it is necessary to evaluate the safety of existing concrete strucutres. On the basis of these reasons, they must be performed for repair or rehabilitation. Presently, strengthening methods of R/C structure used in Korea, are an enlargement of concrete member, strengthening with steel plate or CFRP on the R/C structure. It has been widely estabilished that strengthening effect of CFRP is superior to steel plate in terms of it's lighter unit weight and higher tensile strength. But there are no construction results of CFRP on the civil R/C structure in Korea. The strengthening design technique with CFRP, it's const겨ction, and it's strengthening effect for deteriorated R/C rahmen bridge is introduced in this paper.

• Earthquakes and Structures
• /
• v.20 no.3
• /
• pp.261-278
• /
• 2021

In the current work, a series of seismic analyses of one-storey asymmetrical reinforced concrete (R/C) framed buildings is accomplished while the effect of soil deformability on the structural response is investigated. A comparison is performed between the simplified elastic behavior of R/C elements according to the structural regulations' instructions to the possible non-linear behavior of R/C elements under actual circumstances. The target of the time history analyses is the elucidation of the Soil-Structure Interaction (SSI) effect in the seismic behavior of common R/C structures by examining the possible elastic or elastoplastic behavior of R/C sections because of the redistribution of the internal forces by employing a realistic damage index. The conclusions acquired from the presented elastic and elastoplastic analyses supply practical guidelines towards the safer design of structures.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.657-662
• /
• 2006

The present paper dealt with an experimental study of condensation heat transfer coefficients with refrigerant R-22, R-407C and R-410A, and was focused on pressure gradient and heat transfer coefficient in horizontal tube-in-tube heat exchangers using inner diameter of 4 mm, 3 mm and 2 mm in a 16.91 mm tube and length of 3,000 mm. Experiments were performed at inlet saturation temperature of 35 to $45^{\circ}C$ and mass flux ranges from 200 to $600 kg/m^2s$. The pressure gradient with inner tube diameter of 4.0 mm is higher 2.5 times than that of 8.0 mm. In tube-in-tube HEX, the pressure gradient of R-410A were lower than those of R-22 and R-407C. The condensation heat transfer coefficients increased with mass flux increase, but they decreased with saturation temperature increased. Condensation heat transfer coefficients of R-410A were a little higher than those of R-22 and R-407C. The condensation heat transfer coefficients of tube-in-tube HEX were about 40% higher than those of double tube HEX.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.91-97
• /
• 2004

As a part of our study on the improvement of anticonvulsant, here we report the synthesis of N-acyl-$\alpha$-aminosuc-cinimides 1 and N-acyl-$\alpha$-aminoglutarimides 2. (R)-Benzoic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-ylester 6a, (R)-4-nifro-benzoic acid 4-benzyloxycarbonylamino-2- oxo-pyrrolidin-1-yl ester 6b, (R) -4-nitro-benzoic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 6c, and (R)-propionic acid 4-benzyloxycarbonylamino-2-oxo-pyrrolidin-1-yl ester 6d were synthesized from (R)-2-benzyloxy carbonylamino-succinic acid 3 as a starting meterial. (R)-(3- Benzyloxycarbonylamino-2,6-dioxo-piperidin-1-yloxy)-acetic acid methyl ester 10a, (R)-(3-benzyloxycarbonylamino-2,6-dioxo-piperidin-1-yloxy)-acetic acid ethy1 ester 10b, an d (R)-2-(3-benzyloxycarbonylamino-2,6- diox o-piperidin-1-yl oxy)-propionic acid methyl ester l0c were synthesized from (R)- 3-carbobenzyloxy-amino-glutarmic acid 7 as a starting meterial. The yield, mp, IR, $^1H-NMR,\; and^{13}C$- NMR spectra of the products 6a, 6b, 6c, 6d, 10a, l0b, l0c are summarized in footnote. The biological studies of these compounds are in progress and will be reported in future.