• Journal of Hydrogen and New Energy
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2015

In this study, characteristics of reforming process of automotive liquefied petroleum gas (LPG) fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2/C$ ratios, reactant flow rate and metal form on the process were investigated. In the test of varying $O_2/C$ ratio from partial oxidation to stoichiometry combustion, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2/C$ ratio for the highest $H_2$ yield was determined to be around 1.0 for 20~50 lpm, and 1.35 for 100 lpm. Specific energy density (SED) was major factor in reforming process and higher SED leads to higher $H_2$ yield. And metal form in the reformer increased $H_2$ yield of about 34 % as compared to the case of no metal form. The result can be a guide to map optimal condition of reforming process.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.64-67
• /
• 2002

IrMn pinned spin valve (SV) films with stacks of Ta/NiFe/IrMn/CoFe/Cu/CoFe/NiFe/Ta were prepared by dc sputtering onto thermally oxidized Si (111) substrates at room temperature under a magnetic field of about 100 Oe. The annealing cycle number and temperature dependence of exchange coupling field (H$_{ex}$), magnetoresistance (MR) ratio, and coercivity (H$_{c}$) were investigated. By optimizing the process of deposition and post thermal annealing condition, we obtained the IrMn based SV films with MR ratio of 3.6%, H$_{ex}$ of 1180 Oe for the pinned layer. The H$_{ex}$ is stabilized after the second annealing cycle and it is thought that this SV reveals high thermal stability. The H$_{ex}$ maintained its strength of 600 Oe in operation up to 24$0^{\circ}C$ and decreased monotonically to zero at 27$0^{\circ}C$.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.299-304
• /
• 2019

Yogurt was prepared with different substitution ratio [10, 20, 30, and 50% (w/w)] of skim milk with enzymatically saccharified Korean rice wine lees powder (eKRWLP) and fermented with commercially available mixed lactic acid bacteria (Bifidobacterium longum, Lactobacillus acidophilus, Streptococcus thermophilus) at $40^{\circ}C$ for 18 h. Fermentation characteristics were evaluated in terms of acid production (pH and titratable acidity) and viable cell counts of lactic acid bacteria. The pH of yogurts decreased with increasing eKRWLP substitution ratio of skim milk. After 12 h fermentation, titratable acidities of eKRWLP substitution and control (yogurt made without eKRWLP) were 0.84~1.04% and 0.93%, respectively. The titratable acidities of yogurts prepared with 10 and 20% substitution ratio increased than that of the control yogurt, but titratable acidities of yogurts of 30 and 50% substitution ratio decreased. After 9 h fermentation, the number of viable lactic acid bacterial cell were increased to 8.18~8.24 log CFU/g in all yogurts. In sensory evaluation, there were similar preference for eKRWLP yogurts prepared with 10 and 20% substitution ratio and the control. When eKRWLP substitution and control yogurts fermented for 9 h were incubated at $4^{\circ}C$, their pHs and titratable acidities were slightly changed but the number of viable lactic acid bacteria were well maintained above $10^7CFU/g$ for 11 days in yogurts prepared with 10 and 20% substitution ratio among eKRWLP substitution yogurts. These results suggest that eKRWLP can be used as substituent of skim milk and the optimum substitution ratio is around 10~20%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.250-250
• /
• 2010

Flexible display의 발전에 따라 점차 고온 공정에서 plastic 기판에 영향을 주지 않는 저온 공정으로 변화해 가고 있다. 이러한 발전에 따라 공정온도에 따른 SiNx의 특성 분석을 위해 우선 150C~300C에서 SiNx의 박막을 증착하였다. gas ratio (SiH4:NH3=4:60)와 Power (50W), 공정시간(25min)을 고정하고 온도만을 가변하여 박막의 특성을 분석하였다. 이후에 150C로 온도를 고정 후 gas ratio를 가변하고 Power (40W)와 온도(150C)는 고정 후 실험을 진행하여, 150C에서 최적화된 gas ratio를 알아내도록 하였다. 위의 실험은 p-type 실리콘 웨이퍼 위에 SiNx 박막 증착 후 굴절률과 증착률을 측정하였고, Al 전극을 증착하여 MIS구조를 구현하여, gate voltage에 따른 capacitance를 측정하였다. 이번 논문에서는 SiNx의 Substrate temperature와 gas ratio의 변화에 따른 다양한 특성을 확인하고 이를 체계적으로 분석하였다.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.49-56
• /
• 2015

Objectives : The purpose of this study was to present quantitative data and basic references to decrease the accident risk of soccer instructors. Methods : To obtain data, we conducted an investigation on how H/Q ratio affects the dynamic stability of the lower extremity at the time of drop landing. The study targeted 13 soccer players from C University who have not had any injuries or wounds in the lower extremity joints and in any other parts of their bodies over the last 6 months. By using CMIS (USA), the players were divided into two groups according to H/Q ratios higher and lower than 69%, respectively. The subjects in each group were instructed to perform a drop landing. Results : The H/Q ratio did not affect the maximal flexion angle of the knee joints at the time of drop landing. In addition the dominant group with a relatively high H/Q ratio was observed to have increased time to reduce shock and to efficiently absorb the ground reaction force during drop landing. Also, the dominant group with a relatively high H/Q ratio utilized the strong performances of the antagonistic muscles around the hamstrings and the controlled rotatory powers of the thighs that were applied to the tibias supported by the ground. Finally, H/Q ratio, load factors, and mean and maximum EMG were significantly negatively related, whereas GRFx showed a positive relationship. In fact, these factors all affected the impact of the load from the H/Q ratio to the knee joints. Conclusion : From these findings it can be concluded that unbalanced H/Q ratio can be considered as a predictor of knee joint injury at the time of drop landing.

• Steel and Composite Structures
• /
• v.46 no.4
• /
• pp.565-575
• /
• 2023

This study represents a numerical research in vibration and buckling of functionally graded material (FGM) beam comprising edge crack by using finite element method (FEM) and multilayer perceptron (MLP). It is assumed that the material properties change only according to the exponential distributions along the beam thickness. FEM and MLP solutions of the natural frequencies and critical buckling load are obtained of the cracked FGM beam for clamped-free (C-F), hinged-hinged (H-H), and clamped-clamped (C-C) boundary conditions. Numerical results are obtained to show the effects of crack location (c/L), material properties (E₂/E₁), slenderness ratio (L/h) and end supports on the bending vibration and buckling properties of cracked FGM beam. The FEM analysis used in this paper was verified with the literature, and the fundamental frequency ratio ($\overline{P_{cr}}$) and critical buckling load ratio ($\overline{{\omega}}$) results obtained were compared with FEM and MLP. The results obtained are quite compatible with each other.

• Plant Journal
• /
• v.14 no.4
• /
• pp.33-38
• /
• 2018

In this study, it was confirmed whether the cooling water bypass ratio of packing for plume abatement matched designed value during winter operation of combined cycle power plant. Designed operating wet bulb temperature of the plume abatement cooling tower with 29 Gcal/h capacity had a range from $13^{\circ}C$ to $-20^{\circ}C$, while its designed bypass ratio was from 0 % to 78%, so that increasing rate of the designed bypass ratio was $2.36%/^{\circ}C$ when the external temperature decreased. When the wet bulb temperature at cooling tower inlet had a range from $7.8^{\circ}C$ to $-11.8^{\circ}C$ in a normal operation, it was measured that actual bypass ratio of packing for plume abatement had a range from 23.8 % to 74.3%. While increasing rate of the actual bypass ratio was $2.71%/^{\circ}C$ in a range from $7.8^{\circ}C$ to $-9.55^{\circ}C$, it was $1.61%/^{\circ}C$ under $-10^{\circ}C$ in cold weather condition according to atmospheric temperature drop, therefore it was confirmed that the increasing rate of the bypass ratio for packing was lowered than its design.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.597-603
• /
• 2016

Tantalum carbide, which is one of the ultra-high temperature ceramics, was deposited on graphite by low pressure chemical vapor deposition from a $TaCl_5-C_3H_6-Ar-H_2$ mixture. To maintain a constant $TaCl_5/C_3H_6$ ratio during the deposition process, $TaCl_5$ powders were continuously fed into the sublimation chamber using a screw-driven feeder. Sublimation behavior of $TaCl_5$ powder was measured by thermogravimetric analysis. TaC coatings have various phases such as $Ta+{\alpha}-Ta_2C$, ${\alpha}-Ta_2C+TaC_{1-x}$, and $TaC_{1-x}$ depending on the powder feeding methods, the $C_3H_6/TaCl_5$ ratio, and the deposition temperatures. Near-stoichiometric TaC was obtained by optimizing the deposition parameters. Phase compositions were analyzed by XRD, XPS, and Raman analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.903-906
• /
• 2001

The objective of this experimental study was to understand the effect of horizontal shear bar on the shear behavior of R.C. deep beams. Therefore, in the test program, the horizontal shear bar ratio($\rho_{sh}$) and shear span-to-overall depth ratio(a/h) are considered as two main variables. Test results indicate that for deep beams with a/h equal to 1.0, horizontal shear bar is less efficient in restricting the diagonal crack width development and enhancing the ultimate shear strength. So, it can be concluded that shear resistance of horizontal shear bar is related to a/h rather than clear span-to-effective depth ratio($l_{n}$/d) recommended in ACI code.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.2
• /
• pp.171-178
• /
• 1995

The hydrodesulfurization (HDS) of dibenzothiophene (DBT) were performed simultaneously over CoPtMo/LaY catalyst under high H$_{2}$ pressure. The structure and physical properties of this catalyst were characterized using XRD, IR and surface area analyzer. The origin of acid site was mainly Bronsted. The structures of impregnated molybdenum and platinum were deactivated by DBT to MoS$_{2}$ and PtS, respectively. The activities of the HDS and the hydrocracking increased with increasing temperature and pressure. They decreased with increasing the DBT mole ratio(DBT/n-heptane). They remained constant with increasing the H$_{2}$/H.C. mole ratio. With increasing pressure and DBT mole ratio, the products of secondary cracking increased. To perform simultaneous HDS and hydrocracking effectively, the optimum condition were 500.deg.C, 4MPa.