• Journal of the Korean Society for Precision Engineering
• /
• v.5 no.1
• /
• pp.84-93
• /
• 1988

The on-line detection of the chip flow is one of the most important technologies in com- pletly automatic operation of machine tool, such as FMS and Unmanned Factories. This problem has been studied by many researchers, however, it is not solved as yet. For the recognition of chip flow in this study, the dynamic cutting force components due to the chip breaking were measured by dynamometer of piezo-electric type, and the frequency components of cutting force were also analyzed. From the measured results, the effect of cutting conditions and tool geometry on the dynamic cutting force component and chip formation were investigated in addition to the relationships between frequency of chip breaking (fB) and side serrated crack (fC) of chip. As a result, the following conclusions were obtaianed. 1) The chip formations have a large effect on the dynamic cutting force components. When chip breaking takes place, the dynamic cutting force component greatly increases, and the peridoic components appear, which correspond to maximum peak- frequency. 2) The crater wear of tool has a good effect on the chip control causing the chiup to be formed as upward-curl shape. In this case, the dymamic cutting force component greatly increases also 3) fB and fC of chip are closely corelated, and fC of chips has a large effect on the change of the situation of chip flow and dynamic cutting force component. 4) Under wide cutting conditions, the limit value (1.0 kgf) of dynamic cutting force component exists between the broken and continuous chips. Accordingly, this value is suitable for recognition of chip flow in on-line control of the cutting process.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.979-983
• /
• 2001

Thermoanaerobacter ethanolicus is a strictly anaerobic and thermophilic bacterium whose optimum temperature ranges over $65-68^{\circ}C.$ T. ethanolicus was known to contain a bipolar very long chain fatty acyl component such as $\alpha$, $\omega-1316-dimethyloctacosanedioate$, as one of the major membrane components. However, exact physiological role of this unusual component in the membrane remains unknown. Such a very long chain fatty acyl component, $\alpha$, ${\omega}-1316-dimethyloctacosanedioate$, dimethyl ester (DME C30), was isolated, and purified from the membrane of T. ethanolicus. As a function of added concentrations of the $\alpha$, $\omega-1316-dimethyloctacosanedioate$, dimethyl ester (DME C30) or cholesterol into the standard liposomes, the acyl chain ordering effect was investigated by the steady-state anisotropy with 1,6-diphenyl-1,3,5-hexatriene (DPH) as a fluorescent probe. Acyl chain order parameter (S) of vesicles containing DME C30 is higher comparing with phosphatidylcholine (PC) only vesicles. This result was discussed thermodynamically with the aid of the simulated annealing molecular dynamics simulations. Through the investigation of all the possible conformational changes of DME C30 or cholesterol, we showed that DME C30 is very flexible and its conformation is variable depending on the temperature comparing with cholesterol, which is rigid and restricted at overall temperature. We propose that the conformational change of DME C30, not the configurational change, may be involved in the regulation of the membrane fluidity against the changes of external temperature.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2428-2432
• /
• 2011

A series of new 4-aryl-6,8-dimethylpyrimido[4,5-c]pyridazine-5,7(6H,8H)-diones have been synthesized via three component reaction of 1,3-dimethylbarbituric acid with arylglyoxals in the presence of hydrazinium dihydrochloride in ethanol. All of these derivatives may act as potential monoamine oxidase inhibitors.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.246-255
• /
• 2001

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of muscles extracted with distilled water, saline solution, SDS or Trition X-100 showed simular protein patterns between Hanwoo and Holstein meat, indicating that SDS-PAGE technique may not be useful for the identification between Hanwoo and Holstein meat. Lectine blot analysis of muscle extracted with distilled water demonstrated that Hanwoo and Holstein meat had similar affinities for concanavalin A (Con A), ricinus communis agglutinin (RCA-120), ulex europaeus agglutinin (UEA-1) or peanut agglutinin (PNA) lectins. However, approximately 32.1 kDa component of Hanwoo meat showed high affinity for dolichos biflorus agglutinin (DBA) lectin. On the contrary, high molecular weight components of Holstein meat had the specific affinity for wheat germ agglutinin (WGA) lectin. Hanwoo meat-specific components were observed by lectin staining of heat-denatured meat at 100$^{\circ}C$ for 30 sec. Also, the component of heat-denatured meat at 100$^{\circ}C$ for 30 sec, which was slightly smaller than Hanwoo meat-specific component, was concentrated specifically in Holstein meat.

• Communications of the Korean Mathematical Society
• /
• v.24 no.1
• /
• pp.127-144
• /
• 2009

Let f be a diffeomorphism of a compact $C^{\infty}$ manifold, and let p be a hyperbolic periodic point of f. In this paper we introduce the notion of $C^1$-stable inverse shadowing for a closed f-invariant set, and prove that (i) the chain recurrent set $\cal{R}(f)$ of f has $C^1$-stable inverse shadowing property if and only if f satisfies both Axiom A and no-cycle condition, (ii) $C^1$-generically, the chain component $C_f(p)$ of f associated to p is hyperbolic if and only if $C_f(p)$ has the $C^1$-stable inverse shadowing property.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.722-727
• /
• 2017

Transparent ZnS ceramics were synthesized by hydrothermal synthesis ($180^{\circ}C$ for 70 h), and were sintered by a hot press process at $950^{\circ}C$. To confirm the optical properties of the ZnS ceramics after sintering for various sintering holding times, we performed X-ray diffraction analysis, scanning electron microscopy, and Fourier-transform-infrared spectroscopy. The ZnS nanopowders was found to be single-phase (cubic) without any hexagonal phase. However, the hexagonal phase is formed and increases in content with increasing sintering holding time. The density of the ZnS ceramics was above 99.7%, except for the unsintered one. The ZnS ceramics showed high transmittance (~70%) when sintered for more than 2 h.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.15-29
• /
• 2000

In the Recent rapidly changing technology environment the computerization of administration business which is driven or will be driven to give improved information services to people by local government or central government with a huge budget. The possibility of applying GIS application component to the computerization of administration business is investigated to prevent local government from investing redundant money and to reuse the existing investment at this point of time. Land civil service application component was developed at the $\ulcorner Development of Open GIS Component S/W \lrcorner$ project which was managed by Ministry of Information and Communication . GIS application component was based on Open GIS OLE/COM specification for development of standard interface and USD(Unified System Development ) for development method and UML (Unified Modeling Language) for system design and Visual C++ for component implementation. Implemented components were Process Control, Map, Print, Statistics component and were verified by using Visual Basic and Delhi. tis study shows that the development of component is very useful at the GIS application development for local governments. But the standard of business and data and system is the essential prerequisite to maximize business application.

• Tribology and Lubricants
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2000

Abstract- In this paper tribological characteristics of solid and liquid phase sintered W/C-35%Ni tappets were investigated. Three test methods were performed to investigate the wear and surface damage mechanism of sintered tappets. First, block-on-ring wear test was performed to investigate the wear characteristics under pure sliding condition. Second, simplified cam and tappet tests (called component wear test hereafter) were carried out to simulate the real contact history of cam and tappet. Also, after the test, contact surfaces were analyzed with scanning electron microscope to study the wear mechanism. As a final screening, engine dynamo tests were performed. Results showed that in the block on ring sliding wear test, solid phase sintered specimens showed superior wear resistance to liquid phase sintered specimens. The component wear tests and engine dynamo tests also showed the same results. Therefore, in these tests, solid phase sintered tappet material revealed superior wear resistant properties to liquid phase sintered one.

• KSBB Journal
• /
• v.7 no.1
• /
• pp.1-7
• /
• 1992

Degradation of structural carbohydrates has been observed in samples of sweet sorghum inoculated with either Clostridium cellulolyticum or Bacteroides succinogenes. However, conditions under which these rellulolytic organisms can compete effectively with lactic acid bacteria have not yet been determined. Degradation of cellulose by B. succinogenes was found not to be inhibited by either glucose or succinate.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.472-476
• /
• 2001

Type and three-dimensional morphology of carbides precipitated in the X(X= 1.70, 1.92, 2.21, 2.50, 2.86)%C-5%Cr-5%V-5%Mo-5%W-5%Co multi-component white cast iron were investigated using an optical microscope and SEM. The types of carbides precipitated were MC, M$_2$C and M$_{7}$C$_{3}$. Morphology of the MC carbide took three forms, that it petal-like, nodular and coral-like. MC carbide seemed to change its morphology from petal-like through nodular, and finally to coral-like with an increase in carbon content. M7C carbide was classified into lamellar and plate-like type. The lamellar M$_2$C arbide precipitated in the iron with low molybdenum and tungsten contents, and higher contents of both elements in the iron were needed to form the plate-like M$_2$C carbide. The morphology of M$_{7}$C$_{3}$ was rod-like similar to that observed in high chromium white cast iron. However, cobalt does not affect the type and morphology of precipitated carbides.des.