• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.115-125
• /
• 2007

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke marine diesel engine is of great economic importance. In Korea, a motor-driven cylinder lubricator for a large two-stroke marine diesel engine manufactured by $W{\ddot{a}}rtsil{\ddot{a}}$ Switzerland Co., Ltd. was first developed by authors through the joint research of industry-university in 2002. The characteristic of the developed product is that can control automatically the oil feed rate to a load fluctuation by the motor drive and the offset cam. The performance of the product is not also inferior to the conventional one. For manufacturing the reliable and useful products, however, it is necessary to investigate further characteristics and improve the performance of a cylinder lubricator. In this study, the effect of quill with and without accumulator on maximum discharge pressure, delivery delay duration and oil feed rate relative to motor revolution speed using plunger stroke as a parameter is experimentally investigated by using the developed cylinder lubricator. It is found that the maximum discharge pressure with accumulator is higher than that of no accumulator as plunger stroke and motor revolution speed are elevated, and the delivery delay duration with accumulator is shorter than that of no accumulator as plunger stroke and motor revolution speed are increased. Also, oil feed rate with accumulator is less than that of no accumulator except for a plunger stroke of 2 mm as plunger stroke and motor revolution speed are raised.

• Journal of Animal Science and Technology
• /
• v.58 no.9
• /
• pp.34.1-34.9
• /
• 2016

Background: By-products of pickled radish (BPR) are considered food waste. Approximately 300 g/kg of the total mass of raw materials becomes BPR. Production of pickled radish has grown continuously and is presently about 40,000 metric tons annually in Korea. The objective of the present study was thus to explore the possibility of using BPR as a ruminant feed ingredient. Results: BPR contained a large amount of moisture (more than 800 g/kg) and ash, and comprised mostly sodium (103 g/kg DM) and chloride (142 g/kg DM). On a dry matter basis, the crude protein (CP) and ether extract (EE) levels in BPR were 75 g/kg and 7 g/kg, respectively. The total digestible nutrient (TDN) level was 527 g/kg and the major portion of digestible nutrients was carbohydrate; 88 % organic matter (OM) was carbohydrate and 65 % of total carbohydrate was soluble or degradable fiber. The coefficient of variation (CV) of nutrient contents among production batches ranged from 4.65 to 33.83 %. The smallest CV was observed in OM, and the largest, in EE. The variation in CP content was relatively small (10.11 %). The storage stability test revealed that storage of BPR at $20^{\circ}C$ (room temperature) might not cause spoilage for 4 d, and possibly longer. If BPR is refrigerated, spoilage can be deferred for 21 d and longer. The in vitro ruminal fermentation study showed that substitution of annual ryegrass straw with BPR improved ruminal fermentation, as evidenced by an increase in VFA concentration, DM degradability, and total gas production. Conclusion: The major portion of nutrients in BPR is soluble or degradable fiber that can be easily fermented in the rumen without adverse effects, to provide energy to ruminant animals. Although its high sodium chloride content needs to be considered when formulating a ration, BPR can be successfully used as a feed ingredient in a ruminant diet, particularly if it is one component of a total mixed ration.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.182-190
• /
• 1996

A macerating technique which can apply to the mechanical production system of the agricultural by-product was developed to increase the utilization of agricultural waste and solve the shortage problem in the forage supply for the livestock production. The macerating method is to shred the agricultural by-product by the two rolls which rotate at different speeds each other. The testing macerator was built and the optimum operating conditions are suggested. Results of this research are as follows: 1. The increase of the base roll speed and speed ratio between two rolls shows the better shredding index but decrease the drying rate. The optimum conditions of the base roll speed and the speed ratio between two rolls for the rice straw are 1200 rpm and 1.7-2.0 respectively. 2. The macerated alfalfa was dried to the 15%(w.b.) within 3 hrs in a field at speed ratio of rolls, 2:1 and base roll speed, 1800rpm. 3. The milled surface and straight knurled surface for the macerating roll have same effect on the drying rate of material. Both rolls have self-cleaning functions during operation.

• Korean Journal of Poultry Science
• /
• v.22 no.2
• /
• pp.105-115
• /
• 1995

The balance of microbial populations in the gastrointestinal (GI) tract of all warm-blooded animals is critical to the maintenance of health and resistance to disease. The composition of the populations can be altered by diet and environment, making the host animal susceptible to disease, and reducing growth rate and feed efficiency. Some feed additives including antimicrobial agents, prohiotics or yucca extract have been used to promote growth and feed utilization. There is evidence that part of growth-promoting effect of those feed additives results from the suppression of microbial urease activity or ammonia production in the GI contents of animals. Over 200 microbial species have been known to produce urease and the product of urea hydrolysis, ammonia, is toxic to animals. Carefully tested probiotics or other urease-suppressing agents can be a possible alternative to antimicrobial agents including antibiotics as growth promotants used for animals feeds.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.3
• /
• pp.556-571
• /
• 2020

This study predicts consumer preference for social clothing at work, excluding uniforms using the self-product congruence theory that also establishes a model to predict the preference for recommended products that match the consumer's own image. A total of 490 Korean male office workers participated in this study. Participants' self-image and the product images of 20 apparel items were measured using nine adjective semantic scales (namely elegant, stable, sincere, refined, intense, luxury, bold, conspicuous, and polite). A model was then constructed to predict the consumer preferences using a neural network with Python and TensorFlow. The resulting Predict Preference Model using Product Image (PPMPI) was trained using product image and the preference of each product. Current research confirms that product preference can be predicted by the self-image instead of by entering the product image. The prediction accuracy rate of the PPMPI was over 80%. We used 490 items of test data consisting of self-images to predict the consumer preferences for using the PPMPI. The test of the PPMPI showed that the prediction rate differed depending on product attributes. The prediction rate of work apparel with normative images was over 70% and higher than for other forms of apparel.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2017

The general manufacturing problem can be described as the achievement of a predefined product quality with given equipment, cost and time constraints. Unfortunately, for some quality characteristics of a product such as surface roughness it is hard to ensure that these requirements will be met. Stainless steels STS 304 is frequently used as shaft materials in small fiber reinforced polymer(FRP) fishing boats. In this work, the dry turning parameters of STS 304 are optimized by using Taguchi method. The experiments were conducted at three different cutting speeds with three different feed and three different depth of cut. The cutting parameters are optimized using signal to noise ratio and the analysis of variance. The effects of cutting speed and feed on surface roughness was analyzed. The results revealed that the spindle speed is the more significant parameter influencing the surface roughness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.180-187
• /
• 2015

This study was conducted to determine the effects of feeding by-product feed (BF)-based silage on the performance, blood metabolite parameters, and carcass characteristics of Hanwoo steers. The BF-based silage was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% cut ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial additive (on a wet basis), and ensiled for over 5 d. Fifteen steers were allocated to three diets during the growing and fattening periods (3.1 and 9.8 months, respectively): a control diet (concentrate mix and free access to rice straw), a 50% BF-based silage diet (control diet+50% of maximum BF-based silage intake), and a 100% BF-based silage diet (the same amount of concentrate mix and ad libitum BF-based silage). The BF-based silage was fed during the growing and fattening periods, and was replaced with larger particles of rice straw during the finishing period. After 19.6 months of the whole period all the steers were slaughtered. Compared with feeding rice straw, feeding BF-based silage tended (p = 0.10) to increase the average daily gain (27%) and feed efficiency (18%) of the growing steers, caused by increased voluntary feed intake. Feeding BF-based silage had little effect on serum constituents, electrolytes, enzymes, or the blood cell profiles of fattening steers, except for low serum Ca and high blood urea concentrations (p<0.05). Feeding BF-based silage did not affect cold carcass weight, yield traits such as back fat thickness, longissimus muscle area, yield index or yield grade, or quality traits such as meat color, fat color, texture, maturity, marbling score, or quality grade. However, it improved good quality grade (1+ and 1++) appearance rates (60% for the control group vs 100% for the BF-based silage-fed groups). In conclusion, cheap BF-based silage could be successfully used as a good quality roughage source for beef cattle.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.2
• /
• pp.159-168
• /
• 2010

This study was carried out to investigate the effects of by-product mixing silage feeding on the eating and ruminating behavior of fattening Hanwoo steer. A total of 12 Hanwoo steers (21 months old) were divided into three feeding groups and assigned to 3 dietary treatments: control (C: concentrate + ad libitum feeding of rice straw), and by-product mixing silage groups (T1: concentrate + 1 kg restricted feeding of by-product mixing silage + ad libitum feeding of rice straw, T2: concentrate + ad libitum feeding of by-product mixing silage). Eating behaviors were observed for 48 hours. Total feed intake was high in the order of T1 > C > T2, but not significantly different among the treatments. The eating and chewing time were significantly higher in C than by-product mixing silage treatments (P<0.05). Ruminating and resting time were not significantly different among the treatments. Number of bolus, number of total chews and number of chews per bolus were not significantly different among the treatments. But ruminating time per bolus and FVI (feed value index) were significantly higher in C than T1 and T2 (p<0,01, 0.05). Bolus per minute was the highest in T1 (p<0.01). Number of drinking was significantly higher in T2 than C and T1 (p<0.05), but defecating and urinating were not significantly difference among the treatments. Eating rate was the highest in T2 (p<0.05), but ruminating and chewing efficiency were not significantly difference among the treatments. Consequently, there was no big difference on eating behavior when feed by-product silage comparing with rice straw. Therefore, it is thought that by-product mixing silage could be the alternative for the rice straw.

• Journal of Biosystems Engineering
• /
• v.19 no.4
• /
• pp.343-357
• /
• 1994

Current commercial dairy feed has various problems in low feed productivity, inadequate formulation and higher feeding cost due to excessive capital investment and non-specialized system for the end product. To solve those problems, 6 TMR terminal models were developed in this study. The developed TMR terminal system consists of TMR terminal, TMR main center and combined system linked TMR terminal and TMR main center. 15 TMR main center models were developed to support 10, 20, 30, 40, 50 TMR terminal(30 ton/day basis) by 3 different types, and evaluated for capital investment and operation cost by the analysis of the newly developed computer program. Optimum model size is analyzed and suggested for each model. Followings are summary of this study : 1. The capital investment costs of TMR main centers were 1,600 to 3,800 million won for type 1, 2,200 to 4,500 million won for type 2 and 2,200 to 4,800 million won for type 3. Also model MACE30 or bigger were justified as the economical models. 2. The feed production costs of TMR main center models were 3,166 to 4,824 won/ton for type 1, 3,816 to 6,182 won/ton for type 2 and 3,990 to 6,263 won/ton for type 3. So feed production cost range was 3,166 to 6,263 won/ton. 3. The bigger production capacity, the less TMR main center production cost. The feed production cost of the biggest model MACE50 was 62~65% of smallest model MACE10.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.797-804
• /
• 2003

This study was conducted to determine the effect of feeding a mixture of broiler litter and bakery by-product on production, economy and meat characteristics of growing ‘Hanwoo’ steers. A control diet (conventional formulated feed and rice straw) and a treatment diet(90% mixture of broiler litter 64% and bakery by-product 36% and 10% rice straw on DM basis) were prepared on an isoenergetic basis and fed to 20 steers for 12 weeks. Palatability of TMR by ‘Hanwoo’ was fair. Compared with feeding a control diet, feeding a treatment diet resulted in increased(P〈0.05) DM intake, similar OM intake, similar daily weight gain(0.75 vs 0.64 kg/d) and feed efficiency of DM(10.1 vs 12.5) and OM(9.0 vs 10.6), considerably(45%) reduced(P〈0.05) feed cost/gain, and similar meat characteristics. These results show that a mixed ration manufactured with broiler litter and bakery by-product may be potentially used for growing ‘Hanwoo’ steers.