Kim, Wook-Sung;Lee, Ju-Hee;Kwon, Byeong-Guk;Yoo, Jae-Bum;Kim, Bu-Yeung;Kim, Byung-Soo;Lee, Hye-Ok;Cho, Young-Bok
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.42
no.1
/
pp.1-10
/
2006
Present study was conducted to improve the spring frame net trap for conger eel, Conger myriaster which prevents by-catch and protects immature fish. A series of comparative fishing experiment was carried out in water off the south-east coast of Korea from Nov. 2004 to Jul. 2005. And analyzed the amount of catch, by-catch rate, and CPUE, etc. of experimental traps which were the spring frame net traps, sorted four types of flappers. And the compared gear was a plastic conger eel pot. The conclusions were as follows. By-catch rates of spring frame net trap with the compressed flapper bound by nylon mono-filament was about 0-3%. CPUE of spring frame net trap with the compressed flapper was about 50-60% lower than that of traditional and plastic pot. And in case of conger eel that the total length is over 350mm, CPUE was little different on each type of flapper of every mesh size.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.54
no.2
/
pp.116-123
/
2018
Pacific bluefin tuna (Thunnus orientalis) has been mostly caught by the Korean offshore large purse seine fishery in Korean waters. The annual catch of Pacific bluefin tuna caught by the offshore large purse seine fishery in Korean waters showed less than 1,000 mt until the 1990s except for 1997. The catch sharply increased to 2,401 mt in 2000 and recorded the highest of 2,601 mt in 2003, but the catch has generally decreased with a fluctuation thereafter. The main fishing ground of Pacific bluefin tuna of this fishery is formed around Jeju Island. However, it expanded to the Yellow Sea, the coastal of Busan, and the East Sea, which depends on the migration patterns of Pacific bluefin tuna by season. The CPUE standardization of Pacific bluefin tuna was conducted using Generalized Linear Model (GLM) to assess the proxy of the abundance index. The data used for the GLM were catch (weight), effort (number of hauls), catch ratio of Pacific bluefin tuna, moon phase by year, quarter and area. The standardized CPUE from 2004 to 2011, except for 2003 and 2010, showed a steady trend, and then increased until 2014. The CPUE in 2015 decreased, and in 2016 was higher than that in 2015. The result of GLM suggests that the effect of the catch ratio of Pacific bluefin tuna is the largest factor affecting the nominal CPUE.
This paper has discussed several issues regarding the barriers and opportunities for technological catch-up by the late-comer countries and firms. As one of the barriers to technological catch-up, the paper emphasizes the uncertainty involved with the third stage of learning how to design. The barriers arise because as the forerunner firms refuse to sell or give license to successful catching-up firms who thus have to design the product by themselves. The paper discusses how to overcome this barrier. It also notes that if the crisis of design technology is a push factor for leapfrogging, arrival of new techno-economic paradigm can serve as a pull factor for leapfrogging, serving as a winder of opportunity. The, it emphasized the two risks with leapfrogging, namely the risk of choosing right technology or standards and the risk of creating initial markets, and how to overcome these risks. It discusses how to overcome these risks in leapfrogging, and differentiates diverse forms of knowledge accesses. Then, the paper takes up the issue of whether there can be a single common or several models for catch-up. A common element of catching-up is to enter new markets segments quickly, to manufacture with high levels of engineering excellence, and to be first-to-market by means of the best integrative designs. This observation is supported by the fact that Korea and Taiwan has achieved higher levels of technological capabilities in such sectors as featured by short cycle time of technology. The possibility of two alternative models for catch-up is also discussed in terms of the key difference between Korean and Taiwan, especially in the position toward the source of foreign knowledge and the paths taken toward the final goal of OBM. Taiwan followed the sequential steps of OEM, ODM and OBN, in collaboration or integration with the MNCs. Korean chaebols jumped from OEM directly to OBM even without consolidating design technology.
Park, Hae-Hoon;Millar, Russell B.;Park, Chang-Doo;Park, Seong-Wook;Lee, Sung Il;Bae, Bong-Seong;An, Heui-Chun;Cho, Sam-Kwang;Lee, Kyounghoon
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.50
no.1
/
pp.1-11
/
2014
To compare the catches made using gillnets, trammel nets, and gillnets with supporting lines, several experiments were conducted with commercial vessels near Uljin and Pohang in Eastern Korea between July 2010 and May 2011. Two sets of 13 different nets were used, including 5 panels of gillnets and trammel nets each with stretched mesh sizes of 7.6, 9.1, 10.6, 12.1, and 13.6 cm and 3 panels of gillnets with a mesh size of 9.1 cm with supporting lines with different line spacing. The outer (stretched) mesh size of the trammel nets measured 51.5 cm. The target fishes of the fishing nets were various types of flounders. The catch rate of flounders was 50.7% of the total catch in weight. The total catch for all nets was 443.8 kg. The predominant species was pointhead flounder (Cleisthenes pinetorum). The total catch by trammel nets was 1.4 times that of the comparable gillnets. But more pointhead flounder were caught by gillnets than by trammel nets, though there was no significant difference. Fishermen catching the pointhead flounder in Korea said that there was no need to use trammel net to catch it; this was an unexpected finding compared to the findings of other flounder fisheries. The amounts of roughscale sole, brown sole, and blackfin flounder caught by trammel nets were greater than those caught by gillnets. The mean lengths (standard deviation) of blackfin flounder, pointhead flounder, brown sole, and roughscale sole were 21.0 (4.57), 22.9 (3.40), 24.7 (4.90), and 28.3 (5.43) cm, respectively; there were significant differences in mean length (p < 0.00001). Therefore, in order to catch flounder efficiently, the fishing nets and mesh size should be chosen according to the target species. One advantage of using supporting lines is that it prevents breakage by strengthening the material especially when utilized on a rough bottom. Catch by using gillnet with supporting lines was not greater than that by using trammel net for the conservation of fisheries resources.
This study aimed to analyze the effect of total allowable catches (TACs) on the target species. First to effects analyse of TACs, the 8 TAC target species and 75 non-target species were selected for which catch data were available before and after the introduction of the TACs. The 8 target species were simply compared to catch changes before and after TACs. Through the comparison, it was confirmed how the catches of target fishes have changed after the implementation of the TACs. Secondly, the Difference In Differences(DID) analysis was conducted to confirm the effects of the TACs on the catches of the target fishes using the catch data of 8 TAC target species and 75 non-TAC species. Finally, to overcome the limitations of the DID analysis, the random effects model was estimated to confirm the effects of the TACs on the catch of the TAC target species. Overall, this study confirmed that the TACs affects catches of target species, not only through simple comparisons of catches before and after the introduction of the TACs but also through econometric analysis.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.53
no.3
/
pp.211-218
/
2017
The catch performance of the silver-white jig for automatic jigging machine, developed to improve the effectiveness of LED fishing lamp in catching squid, was compared to that of the conventional green jig. The vessels used in this investigation were Haesong-ho (A-vessel), a training vessel of Gangwon State University and Haengbok-ho (B-vessel), a commercial fishing boat. In the case of the A-vessel, five to eight automatic jigging machines were used in the fishing operation with a 31.3 kW LED fishing lamp in summer. As for the B-vessel, fourteen automatic jigging machines were used with a 43.2 kW LED fishing lamp in autumn and winter. The results showed that the catch performance of the silver-white jig was similar to that of the green jig in the case of the A-vessel (p>0.05). However, in the case of the B-vessel, the catch performance of the silver-white jig was superior to that of the green jig in both winter (p<0.05) and autumn (P<0.001). Based on the catch performance results regarding the B-vessel in autumn, it is expected that the annual income increase that can be earned by using the silver-white jig will be KRW 26,385,000.
Korean manufacturing industry have recently faced the catch-up of China in the mass commodity product, such as automotive, display, and smart phone in terms of market as well as technology. Accordingly, discussion on the importance of achieving catch-up in complex product systems (CoPS) has been increasing as a new innovation engine for the industry. In order to achieve successful catch-up of CoPS, we explored emerging technologies of CoPS, which are featured by the characteristics of radical novelty, relatively fast growth and self-sustaining, through the study of emerging technologies of gas turbine for power generation. We found that emerging technologies of the gas turbine are technologies for combustion nozzle and composition of electrical machine for increasing power efficiency, washing technology for particulate matter, cast and material processing technology for enhancing durability from fatigue, cooling technologies from extremely high temperature, interconnection operation technology between renewable energy and the gas turbine for flexibility in power generation, and big data technology for remote monitoring and diagnosis of the gas turbine. We also found that those emerging technologies resulted in technological progress of the gas turbine by converging with other conventional technologies in the gas turbine. It indicates that emerging technologies in CoPS can be appeared on various technological knowledge fields and have complementary relationship with conventional technologies for technology progress of CoPS. It also implies that latecomers need to pursue integrated learning that includes emerging technologies as well as conventional technologies rather than independent learning related to emerging technologies for successful catch-up of CoPS. Our findings provide an important initial theoretical ground for investigating the emerging technologies and their characteristics in CoPS as well as recognizing knowledge management strategy for successful catch-up of latecomers. Our findings also contribute to the policy development of the CoPS from the perspective of innovation strategy and knowledge management.
Effect of seawater temperature (temperature) on the production of anchovy, Engraulis japonica and laver, Porphyra tenera Kjellman, were investigated in the eastern part of South Sea of Korea (ESS). Bimonthly temperature data (Feb., Apr., Jun., Aug., Oct., Dec.) from 1980 to 2002 were collected from Korean Oceanographic Data Center (KODC) and monthly anchovy catch and laver production from 1980 to 2002 were used from published sources by the Ministry of Maritime Affairs & Fisheries, Korea. Effects of temperature on the two organisms were examined in four cases. In case of lower anchovy catch and higher laver production (1993), temperature during main spawning season of anchovy was about $0.2-0.6^{\circ}C$ lower than normal condition, and temperature during seed collecting season of laver in Namhaedo, Kojedo went down below $22.0^{\circ}C$. In case of higher anchovy catch and higher laver production (1995), optimum temperature for catch was formed in main fishing ground, temperature for seed collection was lower than $22.0^{\circ}C$, In case of lower anchovy catch and lower laver production (1996), temperature for spawning and catch was about $0.6-1.6^{\circ}C$ lower than normal condition, and temperature during seed collection in nursery was about $0.5-1.0^{\circ}C$ higher than optimum temperature for seed collection. In case of higher anchovy catch and lower laver production (1998), temperature during main fishing and spawning season was about $1.0-1.8^{\circ}C$ higher than normal condition, and temperature during laver seed collection in nursery was $1.5^{\circ}C$ higher than optimum temperature for seed collection.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.47
no.4
/
pp.300-315
/
2011
The investigation for the catch and species composition in the deep sea of the East Sea was done to search marine organisms using some kinds of traps with small commercial fishing vessel near Goseong, Korea from 2008 to 2009. The experiments was carried out with some different traps at the depth of 200m, 400m, 700m and 1,000m. In 2008, the amount of catch with rectangular, cone and drum net traps was 91.4kg with twelve trips and the proportion of catch with rectangular and cone traps was high. Dominant species caught were Aniwan whelk (57%), snow crab (12%), hunchback sculpin (7%) and red snow crab (5%). The catch of Aniwan whelk was done well with rectangular and cone traps at the depth of 700-1,000m. Snow crab was mainly caught with rectangular and cone traps at the shallower depth of 200m, while red snow crab caught a lot with cone trap at the deeper depth of 700m. In 2009, the amount of catch with rectangular, cone and round traps was 92.4kg with nine trips. The proportion of catch with round trap was higher than that with cone trap. Dominant species caught were snow crab (67.1%), Aniwan whelk (14.8%) and northern shrimp (9.8%). Snow crab was caught well with round trap at the depth less than 400m.
Despite many previous studies on catch-up, understanding on the effect of product architecture developed by latecomers on the catch-up performance remains limited. On the other hands, in contrast to the semiconductor, ship building, and automotive industry, even if Korean industry and government have invested the development of numerical controllers for machine tools in the past four decades, the industry and government have failed to achieve catch-up. Therefore, we newly examine the effect of product architecture on the catch-up performance of the Korea by implementing comparative research with periods on the evolution of product architecture of Fanuc's numerical controllers, which have achieved the largest market share in the world. We found that Fanuc developed open modular architecture based numerical controllers and provided product with customization of user requirements as well as cost effectiveness. Consequently, Fanuc has sustained market leader position since the mid-1980s. However, despite all the efforts of the industry and government, we found that the Korea failed to develop open modular architecture based numerical controllers and could not achieve significant catch-up performance. Our findings provide important theoretical backgrounds for examining the catch-up performance as well as investigating the reason why latecomers failed to achieve market catch-up even if they accomplished technological catch-up.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.