• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Conservation Science in Museum
• /
• v.29
• /
• pp.153-162
• /
• 2023

Clay figure of Baekje, produced by forming and molding various shapes using clay, are mainly excavated from temple sites and provide essential information for studying the Buddhist art of Baekje. Research on clay figures of Baekje primarily focuses on the characteristics of Baekje-era temples in which such figures are excavated, as well as the role and production techniques of clay figures, by comparing regional and morphological characteristics. In particular, research on the manufacturing method of clay figures is mainly carried out by visual observation, whereas precise scientific analysis is required to understand production techniques and characteristics of raw materials in greater detail. In this study, to confirm such production techniques and material characteristics, computed tomography (CT) scans were conducted on the Clay Bodhisattva excavated from the Neungsan-ri Temple site in Buyeo. As a result, it was found that the Clay Bodhisattva was made using a cylindrical core of fine clay, tied together with several thin branches or reeds with straws. The clay used in the figure bore traces indicating the presence of herbaceous plants, which increase adhesion between clay and prevent cracks in the contraction process. On the other hand, the density of the fine clay differs on the inside and outside of the clay figure. Based on this, it is presumed that the clay was applied around the cylindrical core to shape the Clay Bodhisattva. The clay was reapplied on top of the figure to express the detailed shape and pattern.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.4-17
• /
• 2011

The Baekje's cotton fabrics were excavated from 'Neungsan-ri temple site in Buyeo' (September 1999-April 2000) and stored at Buyeo National Museum after conservation treatment. In this study, it carred out non-destructive, chemical and morphological analysis for fiber identification, also considered on influx, features and difference between the 'Baek-cheop-po(Three kingdom period's cotton fiber)' and 'Mok-myeon(imported by Munikjeom, late Korea dynasty)'. As a result, the fiber proved cellulose fiber through analytical researches like color reaction, FT-IR(chemical analysis). It was also confirmed lumens, typical dimensional structure(morphological analysis) as an features of cotton fiber. The fiber was the first evidence in ancient Korea's cotton. But it can not prove that whether weaving were made in Baekje's area. However there were documentation that people in Beakje make cloth to silk fabric from 'Mahan period'. We can suppose that they have had an old weaving techniques. This study has a great historical, academic values as the only evidence for the hypothesis of a weaving technique of the Baekje's cotton. Through comparison to each region's ancient cottons, we can investigate the species of Baekje's cotton and ancient Korea cotton's influx.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.13-24
• /
• 2010

This study examined each handiwork method of 4 filigree artifacts from Neungsan-ri temple site in Buyeo, Korea through material characteristic and microstructure analysis. As a result, it was indicated that all of the artifacts have comparatively higher purity than 22.7K and some of filigree artifacts showed that gold is alloyed with silver at a certain ratio. Gold thread that decorates surface showed thickness of 0.2~0.8mm and displayed various forms of section. Gold granule indicated that 2 or 3 granules are adhered together and they are 0.3~0.8mm in diameter. Trace of soldering was observed from gold thread and gold granule joints on surface and it confirmed a possibility of being soldering using gold solder through componential analysis. Also, it reveals a surface decorated with pigments such as cinnabar(HgS) and black.

• Conservation Science in Museum
• /
• v.26
• /
• pp.67-82
• /
• 2021

Two golden beads (Buyeo 5336) housed at the Buyeo National Museum were discovered in 1993 near the site of an ancient workshop in Neungsan-ri in Buyeo-gun, Chungcheongnam-do Province. These rare examples from the Baekje Kingdom of an application of granulation have maintained their original form intact, and thus serve as important materials for the investigation of production techniques applied. This study analyzed the composition of the golden beads using a portable X-ray fluorescence analyzer, a stereo microscope, and a scanning electron microscope with an energy dispersive X-ray spectrometer. The manufacturing technique was examined through the observation of the micro-shape and the surface condition and by a composition analysis of the joint part. In both beads, a hole was pierced in a hollow body and the bead was decorated with golden wires around the hole and gold granules in other parts. In some areas, golden granules had been attached to the gold plate and golden wires were then placed over the granules. The purity of both the wires and the granules was analyzed as 23.6 - 23.7K. A high copper content was detected in some of the parts where the granules were attached. The findings of a previous reproduction experiment and study of production methods suggest that the beads were made using the copper diffusion technique.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.155-171
• /
• 2010

King Seong carried out the large-scale construction transferring the capital from Wungjin (Gongju) to Sabi (Buyeo) in 538. But because most of the Buyeo area was the low swamp in the time, it needed above all to form a site before transferring the capital. Until recently, in addition to the scientific excavation, the relief excavations for the construction of new building or the formation of road were conducted on many sites in the Buyeo area. As a result, many remains which were formed on the low swamp including the temple site of Neungsan-ri, Dongna Castle, the remains of Ssangbuk-ri (280-5 Bukpo, Hyeonnaedeul) and the remains of Gua-ri were identified. Also in these remains, the various engineering construction methods irrespective of the nature of remains were used for the purpose of the soft ground reinforcement as follows: mattress method of construction, pile designation, stone alignment, filing of decomposed granite soil, culverts and storage tanks. Especially, the mattress method of construction and the pile designation are thought to be the traditional engineering construction method at least in that they are appeared since the Three Han Sates era. And these soft ground construction methods had an effect on the construction of reservoir in Japan at the time. In the future, the construction method for soft ground reinforcement shall be concerned and studied further in the architecture and the civil engineering as well as the archeology.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.138-163
• /
• 2021

The Buyeo Wangheungsa Temple was excavated 15 times by the Buyeo National Research Institute of Cultural Heritage by 2015. In doing this, it was confirmed that the attached buildings were placed in the east and west along with the central Sangharama building. Various building sites were established in the western section of the temple, and various buildings were placed inside, and this pattern was estimated in the eastern section. In this article, the structure and function of the attached buildings of the Wangheungsa Temple were focused on the planar structure and excavated artifacts. The most distinctive feature of the attached buildings of the Wangheungsa Temple is their construction alongside the central Sangharama building. It is different from the building to the Neungsan-ri Temple, which was expanded gradually. The attached buildings in the east and west of the lecture hall are presumed to be living space for monks who used solitary rooms, and the attached buildings in the east and west of the main hall were a combination of public work space used for things such as administration, ceremonies, and reception. Next, looking at the outer space of the central Sangharama, the western section was likely constructed at the same time as the central Sangharama. However, if you look at the building site inside the western section, the function has been changed in two stages. The first stage was a ritual space, and it is evident that the western section has a separate entrance and sidewalk and that the workshop was used as a monastery space in the second stage. Finally, there is a distinct possibility that the eastern part of the complex was an important section. Although this space is presumed to be composed of triple towers and halls, it must be have been approached in various ways and included structures related to the operation of temples, such as the monastery space. From this point on, the overall appearance of Baekje temples can be recovered through access to temple structures in a wide variety of ways, including studies of the attached buildings.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.325-331
• /
• 2013

The Baekje Gilt-bronze Incense Burner which was excavated in an ancient temple site in Neungsan-ri, within the City wall of Buyeo-Gun on 23rd December 1993, was a quintessence of the Bakje Arts that people could not have imagined until that time. The Baekje Gilt-bronze Incense Burner transcended 1400 years of time and space. The censer that finally came up to us delivered a kind of a powerful message to us. The power was so strong and mysterious that as if an ancestor who had been sleeping in the grave with a great silent had woken up and become alive to tell us something very precious. Baekje Gilt-bronze Incense Burner, unlike any other existing artifacts, might have a possibility that could provide an insight of the ancients' psych who once lived on our land. This kind of view from several archaeologists, therefore, made our hearts be filled with excitement and flutter. We call 21st century as an era of culture. This era requests that the culture needs to be ethnical but the culture also needs to go beyond that ethnic. In other words, a culture without an ethnic cannot exist, and a culture that puts an ethnic the very first before any other things cannot exist as well. Regaining our identities first and then embracing and harmonizing various cultures can be an wise way overcoming above problem. Hence, through this study, I intend to recognize characteristic of plasticity for Baekje Gilt-bronze Incense Burner, understand the world of Baekje people's spirit and thus provide an opportunity to shed new light on the Baekje Arts. By doing so, I would like to publicize a metal craft of Korea to the world. I also try to seek for an identity of Korea's craft culture which is receding and find a direction for the Korea's craft.