• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.54-63
• /
• 2014

Traffic accident frequency and severity level in Korea are known to be very serious. Especially the number of pedestrian fatalities was much worse and 1.6 time higher than the OECD average. According to the National Police Agency, the flash signals are reported to have many safety benefits as well as travel time reduction, which is opposed to the foreign studies. With this background of expanding the flash signal, this research aims to investigate the overall impact of the flash signal operation on safety, investigating and comparing the accident occurrence on the flash signal and the full signal intersections. For doing this accident prediction models for both flash and full signal intersections were estimated using independent variables (geometric features and traffic volume) and 3-year (2011-2013) accident data collected in Seoul. Considering the rare and random nature of accident occurrence and overdispersion (variance > mean) of the data, the negative binomial regression model was applied. As a result, installing wider crosswalk and increasing the number of pedestrian push buttons seemed to increase the safety of the flash signal intersections. In addition, the result showed that the average accident occurrence at the flash signal intersections was higher than at the full signal-operated intersections, 9% higher with everything else the same.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.235-246
• /
• 2007

The study aims to design an integrated remote controller, which is an increasingly essential device in the home, for more convenient use. For this purpose, an alternative user interface (UI) design was developed by applying the user interface system of a popular existing product to an integrated remote control highly usable and easy to learn for domestic use, and the usability was evaluated. For the existing popular product, a cellular phone was selected, the operation method of which is similar to the stick-type integrated remote control for which the user interface design was to be developed in this research. Common characteristics of the UI of the selected cellular phone were derived and the characteristics were applied as much as possible to the design of a stick-type integrated remote control. The prototype of the alternative design, which was simulated with Flash, went through two pilot tests for further improvement before making the final experimental prototype. Based on the results, prototype buttons that improved the feeling of use in terms of physical operation and feedback were made, and the usability of the new UI design of a stick-type integrated remote control for domestic use were evaluated with 41 university students in their 20s. According to the results of the experiment, the newly designed stick-type integrated remote control based on the UI of an existing product may improve the usability of remote controls and the outcome of this study is expected to provide a good model for R&D of new UI designs of stick-type integrated remote controls for domestic use.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.573-578
• /
• 2008

Recently, we should control various devices such as TV, audio, DVD player, video player, and set-top box simultaneously to manipulate home theater system. To execute the function the user want in this situation, user should know functions and positions of the buttons in several remote controllers. Normally, people feel difficult due to these realistic problems. Besides, the number of the devices that we can control shall increase, and people will confuse more if the ubiquitous home environment is realized. Therefore, user adaptive interface that provides the summarized functions is required. Moreover there can be a lot of mobile and stationary controller devices in ubiquitous computing environment, so user interface should be adaptive in selecting the functions that user wants and in adjusting the features of UI to fit in specific controller. To implement the user and controller adaptive interface, we modeled the ubiquitous home environment and used modeled context and device information. We have used Bayesian network to get the degree of necessity in each situation. Behavior selection network uses predicted user situation and the degree of necessity, and it selects necessary functions in current situation. Selected functions are used to construct adaptive interface for each controller using presentation template. For experiments, we have implemented ubiquitous home environment and generated controller usage log in this environment. We have confirmed the BN predicted user requirements effectively as evaluating the inferred results of controller necessity based on generated scenario. Finally, comparing the adaptive home UI with the fixed one to 14 subjects, we confirmed that the generated adaptive UI was more useful for general tasks than fixed UI.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.78-78
• /
• 2003

Purpose: This event related fMRI study was to further our understanding about how different brain regions could contribute to effective access of specific information stored in long term memory. This experiment has allowed us to determine the brain regions involved in recognition of familiar faces among non familiar faces. Materials and Methods: Twelve right handed normal, healthy volunteer adults participated in face recognition experiment. The paradigm consists of two 40 familiar faces, 40 unfamiliar faces and control base with scrambled faces in a randomized order, with null events. Volunteers were instructed to press on one of two possible buttons of a response box to indicate whether a face was familiar or not. Incorrect answers were ignored. A 1.5T MRI system(GMENS) was employed to evaluate brain activity by using blood oxygen level dependent (BOLD) contrast. Gradient Echo EPI sequence with TR/TE= 2250/40 msec was used for 17 contiguous axial slices of 7mm thickness, covering the whole brain volume (240mm Field of view, 64 ${\times}$ 64 in plane resolution). The acquired data were applied to SPM99 for the processing such as realignment, normalization, smoothing, statistical ANOVA and statistical preference. Results/Disscusion: The comparison of familiar faces vs unfamiliar faces yielded significant activations in the medial temporal regions, the occipito temporal regions and in frontal regions. These results suggest that when volunteers are asked to recognize familiar faces among unfamiliar faces they tend to activate several regions frequently involved in face perception. The medial temporal regions are also activated for familiar and unfamiliar faces. This interesting result suggests a contribution of this structure in the attempt to match perceived faces with pre existing semantic representations stored in long term memory.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.51-57
• /
• 2013

As facilities and equipments for learning activities in college campuses are handled by mass public, their contact surfaces may function as major routes of cross-infection of microbial pathogens. However, unlike items in cafeteria which is the typical target for campus hygiene, those surfaces are not under regular surveillance or sanitary maintenance. In this study, I made a quantitative comparison of the risk of being exposed to microbial pathogens from use of learning facilities such as classrooms and library to the risk from use of cafeteria, for about 1,500 students in a college. Regarding total coliforms as surrogate model of bacterial pathogens, exposure rates were estimated for each item in learning facilities and cafeterias by devising deterministic exposure algorithms based on bacterial abundance, contract rates and transfer rates. The exposure rate in cafeterias was 1.0 CFU/day while learning facilities imposed the rate of 0.5 CFU/day, which reaches a half of the exposure rate in cafeterias. However, 70% of students were exposed more in learning facilities than cafeteria because individuals had different frequencies in using cafeteria. Based on the results, some human-contact surfaces of learning facilities, including elevator buttons, may require regular sanitary maintenance. An efficient sanitary maintenance considering seasonality in diversity of pathogens involved with cross-infections is suggested besides improvement of personal hygiene among students.

• The korean journal of orthodontics
• /
• v.40 no.4
• /
• pp.267-275
• /
• 2010

Objective: The aim of this study was to evaluate and compare the shear bond strength (SBS) and failure-mode of orthodontic buttons bonded to erupted and unerupted teeth with conventional and self-etching adhesive systems. Methods: Eighty-four erupted and 84 unerupted, human third-molar teeth were used. For both groups, the buccal surfaces of each tooth were assigned one of the following type of adhesive systems (n = 12). A, Conventional systems: 1, Transbond XT (3M Unitek, Monrovia, CA, USA); 2, Prime & Bond NT (Dentsply/Caulk, Milford, USA); 3, Single Bond (3M ESPE, Minnesota, USA); and B, Self-etching adhesives; 4, Clearfil SE Bond (Kuraray, Okayama, Japan); 5, Transbond Plus (3M Unitek, Monrovia, CA, USA); 6, Clearfil S3 (Kuraray, Tokyo, Japan); 7, G Bond (GC, Tokyo, Japan). The SBSs of the attachments and the adhesive remnant index (ARI) scores were recorded. Data were analyzed with analysis of variance (ANOVA), independent-sample t-test and chi-square tests. Results: When the SBSs of erupted and unerupted teeth were compared, only the Clearfil-SE Bond and G-Bond were significantly different. Bond strengths of all adhesive systems were higher in unerupted teeth than erupted teeth, except the Single-Bond system. Conclusions: When using conventional adhesives, bonding to erupted and unerupted teeth may not be significantly different. However, clinicians need to take into consideration the types of self-etching systems before usage.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.595-603
• /
• 2013

Touchscreen is now installed in the majority of information devices thanks to the developed digital technology. In case of copiers, although touchscreen was installed earlier than any other information device, current user interface indicates that conventional methods have been maintained without any special re-validation. But, since common office devices such as copiers have brief usage time and clear, straightforward purposes, user experience between an user and device is perhaps an important element. Nevertheless, conservativeness of the market and the fact that users and buyers are not always the same are a stumbling block to actively changing UI. Recently, however, as hardware element, buttons, have moved to touchscreen mostly for smartphone, and common and public devices have seen rapid changes in UX, mostly with touchscreen, it has led to high demand for changes in UX of copiers. To remedy the issues with copiers, a literature review was conducted through existing studies and user evaluation based on user survey and prototype was done to examine the copier's UI elements and relevant changes in usage. In particular, a new direction for UX of copiers was suggested by analyzing the impact of differences between software button-oriented UI and hardware button-oriented UI on users and usability. This study findings could be used as basic data for improving the usability of future common devices including copier and UX design.

• Journal of Broadcast Engineering
• /
• v.10 no.4 s.29
• /
• pp.474-487
• /
• 2005

T-DMB (Terrestrial-Digital Multimedia Broadcasting) adopted MPEG-4 BIFS (Binary Format for Scene) Core2D scene description profile and graphics profile as the standard of video associated data service. By using BIFS, we can support to overlay objects, i.e. text, stationary image, circle, polygon, etc., on the main display of receiving end according to the properties designated in broadcasting side and to make clickable buttons and website links on desired objects. Therefore, a variety of interactive data services can be served by BIFS. In this paper, we implement real-time video associated data service system far T-DMB. Our developing system places emphasis on real-time data service by user operation and on inter-working and stability with our previously developed video encoder. Our system consists of BIFS Real-time System, Automatic Stream Control System and Receiving Monitoring System. Basic functions of our system are designed to reflect T-DMB programs and characteristics of program production environment as a top priority. Our developed system was used in BIFS trial service via KBS T-DMB, it is supposed to be used in T-DMB main service after improvement process such as intensifying system stability.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.165-172
• /
• 2005

Button layout of mobile phone depends on the manufacturer and is going to be characterized in it's own way. So, there is not a standard layout except for numeric part. It is due to the lack of study on physical user interface and methodology to develop a design guideline. This study focuses on suggesting a methodology for development of button layout for mobile phone in term of physical user interface. The methodology of this study starts from scenarios of mobile phone usage. Operational sequences of 4 scenarios for 5 models are gathered based on the user manual. Proximity of each buttons is calculated according to the operational sequence. One of 5 models is selected and benchmarked by evaluating operational path. Considerations and directions are implicated to develop new solution alternatives. After evaluation of them, one of alternatives is suggested as an optimized button layout for mobile phone. This study focuses on an attempt to suggest a methodology of UI development in the matter of physical user interface, and a simple and easy way to be adopted and used at product designer level, compared to existing UI methodology for the expert.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.237-246
• /
• 2020

The background of the research is the following: As a result of ultra-light flying device industry development, the utilization of drones and their efficiency have been increasing. However, problems regarding flight permission·approval procedure have not been improved, resulting in increased number of civil complaints. Thus, the purpose of this research is to minimize such civil petition according to the required standards of the two government organizations through enhancing the procedure for managing and employing the system. The research methods entail pinpointing the problems by analysing ultra-light flying device related literature review and by holding focus-interviews with field experts, thereby verifying and providing improved solutions. Under (MLIT) Ministry of Land, Infrastructure and Transport supervision and in accordance with aviation security law, the research provides various updated functions such as improved civil petition processing system's employment and management system, flight approval, integration of names, process, format regarding aviation photographing approval, tool buttons such as the 'Main' button in the system's homepage. This research has the following expected effects : Firstly in the law and regulations section, the clear distinction in the missions and roles of each organization enhances cooperations in tackling civil petition. Secondly the integration of civil petition process reduces time and improves efficiency. And lastly, the improvement of supplementary tools for the public is expected to minimize civil petitions. Future research needs to be conducted under the supervision of the Ministry of National Defense(MND). Factors such as systematic infrastructure for flight photography approval, related unit's reorganization following the defense reform 2.0, and guaranteed conditions for field security action units need to be ameliorated.