• Journal of Distribution Science
• /
• v.16 no.6
• /
• pp.5-13
• /
• 2018

Purpose - The purpose of this paper is to look into some alternative for Korean shipping to overcome difficult situations in shipping, since then it is economic crisis at the end of 2000s. Research design, data, and methodology - The research method to be adopted is first to review theoretical overview about shipping cycle, and then examine difficult shipping situations and studies management aspect, which is to related to establishment of Korea Shipping Council. Results - The boom and bust situations in shipping market have been identified as result of economic crisis at the end of 2000s. Trade volumes have fallen and shipping tonnage has risen respectively. In practical terms, shipping industry has suffered from difficult situations, following to supply and demand of shipping market, and Korean shipping had to face hard time as well, according to lack of management ability of shipping company. Alternatively, it should be asked shipping forum like Korea Shipping Council. Conclusions - From situations of shipping markets since the end of 2000s, it is strongly asked that every parties got involved in shipping business should understand and share more expertise and knowledge of shipping market, which is finally related to decision- making process in shipping.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.2
• /
• pp.89-100
• /
• 2012

The purpose of this research is to compare the body proportion of the Mongolian and Korean men and women in their 20' s by comparing the characteristics of the body type that uses the body indexes, in order to provide the base data for the increased fit of the apparels. The results are as follows. 1) Histogram of the Rohrer' s Index for the Mongolian men and women in their 20s was examined. the Mongolian men, normal body type took up 48.0% while small body type comprised 50.0% and obese body type comprised 2.0%. the Mongolian women, normal body type comprised 61.5%, small body type comprised 22.1% and obese body type comprised 16.4%. 2) The body proportion of Korean men has 1:1.62 with upper body and low body part on a waist basis, and Mongolian men has 1:1.65. Thus Mongolian men has longer pan of lower body than Korean men. 3) Mongolian women has longer part of lower body and has higher rates of hip height, crotch height, knee height than Korean women. Mongolian women has high rate of hip line and calf length. 4) As a result comparison using the body index of Mongolian and Korean women (bust thickness/ bust width, waist thickness / waist width, hip thickness / hip width, when regarding the height as 100 ), it was found that Mongolian women are flatter than korean women.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.199-208
• /
• 1990

In order to eximine the body form of the physically handicapped people, the 11 items of angle, 54 items of size and weight of the subjects were measured body silhouetter photographs and with the Martin's anthrophometeric instrument respectively. The subjects were consist of 37 boy students who are 13-19 years old and hemiplegias caused by cerebral palsy. And then the comparison between normal and paralysis sides, analysis of somatotypes with the body silhouetter photographs, ANOVA for effect of somatotype on measuring items for angles, and factor analysis for all items were carried out. The results were as follows: 1. The results of measuring are difference between normal and paralysis sides. 2. The items shown significant differences between normal and paralysis sides are diagonal anterior chest B, scapula length, armscye girth, diagonal posterior chest A, and arc of the bust. 3. The percentage of each somatotype shows the order of bending somatotype, turning over somatotype, turning over-bending somatotype, and standard somatotype in the upper body. There are significant differences between somatotypes and sternalis up, sternalis down, scapula, vertebialis, ${\alpha}$, and ${\beta}$ angles respectively. 4. From the result of factor analysis, front and back sections, length items of the upper part and the lower part from the bust line, and the upper size items at the bottom of armscye were abstracted.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.15-19
• /
• 2001

A dedicated reverse engineering(RE) system for rapid manufacturing of human head in a 3D bust has been developed. The first step in the process is to capture the surface details of a human head and shoulder by three scanners based upon the digital moire fringe technique. Then the multiple scans captured from different angles are aligned and merged into a single polygonal mesh, and the aligned data set is refined by smoothing, subdividing or hole filling process. Finally, the refined data set is sent to a 4-axis computer numerically control(NC) machine to manufacture a replica. In this paper, we mainly describe on the algorithms and software for aligning multiple data sets. The method is based on the recently popular Iterative Closest Point(ICP) algorithm that aligns different polygonal meshes into one common coordinate system. The ICP algorithm finds the nearest positions on one scan to a collection of points on the other scan by minimizing the collective distance between different scans. We also integrate some heuristics into the ICP to enhance the aligning process. A typical example is presented to validate the system and further research work is also discussed.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1008-1022
• /
• 2007

The purpose of this study is to propose apparel sizing system for each body shape of early adolescent boys. The subjects of this study were 549 boys in the capital area. Their body shapes were classified and apparel sizing system was proposed for each body shape. For data analysis were performed descriptive statistics, correlation analysis and crosstabulation using SPSS Ver. 12. The control dimensions to propose apparel sizing system were stature and bust circumference for the upper garments. Intervals between sizes were 5cm for stature and irregular for bust circumference. For each type, $5{\sim}7$ sizes were proposed for upper garments. Reference measurements suggested for upper garments were 9 items. This study is meaningful in that it classified early adolescent boys' body shapes and proposed apparel sizing system for each type of body shape under the current circumstances where basic data for body shape classification and apparel sizing system of early adolescent boys were not in place.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.1-12
• /
• 2005

This study was to suggest a feasible sizing system of infants and children's swim-suits. The basic body dimensions were selected after surveying the swimsuit manufacturers. The control dimensions and the secondary dimensions were taken from the 1997 National Anthropometric Survey data for the establishment of the sizing system. While in the current market swimsuit sizes were generally measured by the hip circumference for boys, and the bust and hip circumference for girls, the height was selected in this study as the control dimension because the height is well recognized by the customers and the KS standards specify the height to be the control dimension for infant's and children's wear. In the new sizing system of this study, the height was a control dimension, and hip was selected as a secondary dimension for boys. and bust and hip were selected as secondary dimensions for girls. Conclusively, in this study we suggest 12 sizes in case of 5cm height interval by the KS sizing system and 7 sizes in case of loom height interval by the current market sizing system, based on the height as a control dimension, for a standard swim-suit sizing system for infants and children.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.1
• /
• pp.105-115
• /
• 2000

This study was intended to find body pattern of middle aged women and make new experimental basic pattern for upper-half of the body for them. This experimental pattern on the idea of body pattern analysis was prepared. For experimental pattern, the prototype basic model was chosen with the best qualified D model from the four meaningful existing patterns. After several steps of correction experimental pattern was made. Comparing with basic D model, the new experimental pattern composed of additional bust girth by 1cm, wider back waist by 0.5cm than front waist and additional armhole by 0.5cm keeping the same size for back and front widths. Making a shoulder line up by 3cm the armhole became deeper accordingly and the room for girth has been transferred to length. Front neck girth became deeper downward but back neck girth risen a little bit. Side line of the bodice formed with inward slope taking from the waist line by 2cm. Instead of dart, modified side line slope was more practical by its function and appearance. Abdominal girth which is lower than waist girth by 8.5cm kept in same size with bust girth. Then abdominal girth became more comfortable. New experimental pattern with changes has been examined in function and appearance. In conclusion, the new experimental basic pattern for the middle-aged women has been proved more practical for both in bodice and sleeve than other existing ones in terms of function and appearance.

• Fashion & Textile Research Journal
• /
• v.4 no.6
• /
• pp.534-543
• /
• 2002

The purpose of this study was to identify the body proportions of girls in middle and high school who have been a major sales target of clothing manufacturers and thus to provide the basic information on the proportion of human body, which is essential for manufacturer to produce clothing and for individual consumers to select right apparels to wear and purchase. The subjects were 133 girls in middle school and 141 girls in high school. As measuring instruments, the Martin's anthropometer, tapelines, and belts for marking waistline were used. In order to analyze the data, t-test and factor analysis were used. The measurement of vertical distance between vertex and measuring points, showed a significant difference between the high school group and middle school group in every item. In the comparison of eight head proportion between the two groups, middle school students had 7.2 head proportion while girls in high school had 6.9 head proportion in detail. The factor analysis of major divided body parts of the two groups indicated that waist-hip and hip-crotch, constituting lower trunk together, vertex-apex nasi, and apex nasi-back neck point, constituting head together, back neck point-spina scapula and spina scapula-waist, constituting posterior of upper body together, and mentum-bust point and bust point-waist, constituting anterior of upper body together, were in inverse proportion.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1267-1276
• /
• 2009

The purpose of this study is to classify breast types and to inquire about characteristics depending on breast types of women subjects in their twenties. We researched size items affecting breast volume and regression equations for the prediction of breast volume, and thereby, we will be able to provide some basic data, useful to the development of the brassiere depending on breast types. As a result of categorizing the types of three breast types, "type 1" was characterized by big and greatest protrusion of the breast with large breast volume and a large bust, while "type 2" was characterized by flat breasts with the least breast volume and least bust, and "type 3" was characterized by breast location apart from the center front line. Breast volume is significant in establishment of the brassiere cup depending on breast type. Five items such as, the circumference of the breast, the length of the upper breast, the depth of the breast point, the length of the shoulder point-breast point, and the length of the inferior breast were extracted through regression equations for breast volume.