• Journal of Fashion Business
• /
• v.22 no.6
• /
• pp.105-114
• /
• 2018

The purpose of this study is to investigate the diverse constructive characteristics which significantly affects performance besides materials information provided to consumers on functional clothes. Outdoor jackets can classified them according to their performance level. In order to provide consumers with necessary information to choose functional outdoor jackets, 12 brands selling domestic outdoor jackets were investigated and the conclusion of this study was as follows; It was found that fit degree, backpack weight, arm-raise, and number of pockets vary differently depending on performance level of outdoor jacket. Considerable constructive difference was found between high performance jacket mainly worn by professional climbers in extreme environment and jacket that can be worn in daily life. It is found that different characteristic is related not only to each diverse & complex constructive aspect, but also to ability to stretch, resistance to water, venting system of materials depending on performance level of outdoor jacket.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.91-102
• /
• 2005

The purpose of this study was to investigate the range of variation for commonly accepted ease in a business jacket and thus to find solutions to the problem of fit and ease in ready-to-wear jackets. This study was based on anthropometric measurements, pattern measurements, which were used to calculate ease amount according to each jacket part. The survey subjects were 493 males, between 25 to 59 years old, buying a jacket at stores in Seoul. In the results, the aesthetic purpose of a business jacket(custom-fit jacket) was clearly observed by the means of controlling the ease amount at chest, waist and hip. The ease at chest and waist(ready-to-wear) clearly revealed a difference among prototypes. This result can be explaned by the regular drops and the similar length-width proportions between sizes in ready-to-wear Jackets. Therefore, customers with varying body drop differences, who had to choose a homogeneous jacket drop, experienced too much ease at the Waist and Hip compared with custom-fit customers. In addition, the height could be an integral factor to affect the ease of jacket length and sleeve length. The ease at these parts was significantly different among height groups and showed negative relationships.

• Journal of Fashion Business
• /
• v.1 no.3
• /
• pp.95-102
• /
• 1997

This study is aimed for men's jacket draft not only to other style but also helping for men's jacket fits for trend by presenting the course to get a style we want by adding to the partial drafty changes in existing pattern of men's formal jacket selected two kinds of men's jacket style fit for 1997 S/S trend. In this 1997 S/S trend, the trend I of the characteristic formal jacket is a style slim expressed over the basic formal wear, and trend II of the characteristic casual jacket appears to women's wear that roundly expressed by collar line of V-zone returened back by the shoulder line of jacket made of a big diagonal wrinkled line of X-style in front centered around a button of center front line. In this study, it called that the existing traditional formal jacket of men is a A style of jacket and jacket style I, II is a jacket B, C style. Jacket A, B, C style, a distingtion in draft that added to make form an oblique wrinkled line of the X-shaped-making artificially to the front button line sharply distinguished by eyes will be come out by control of front neck width over the back neck width. According to this, we shall be found that place of front neck point is a cardinal point in draft that will be added any changes in a style of jacket.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.167-181
• /
• 2011

This study had researched purchase trend and preference of jacket design in order to develop a prototype of an outdoor wear jacket that can be worn for a light outdoor activity targeting middle-aged men and women. An outdoor wear was purchased mostly in a permanent discount store and functionality such as activity and material was considered as important in addition to design. There was difference in ages for the jacket style, but in general, people preferred a wind protection jacket and men preferred black colors and women preferred red colors. For the design of jacket, both men and women had preferred a jacket that has moderate fitness with detachable hat and a zipper, and it was applied to the prototype. The jacket had applied different color in the armhole line that is connected to sleeve in order to make waist look slimmer and stretchable material was used to improve functionality in the armpit part.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.136-152
• /
• 2008

The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.41-57
• /
• 2006

The purpose of this study were to provide dress forms and men's jacket blocks based on the analysis of their somatotype. As the result of the previous research, based on 1290 males of 20 to 54 year-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth and master size was selected considering appearance frequency. Somatotype YS(master size: height 170cm, chest girth 91cm) and HD1(master size: height 170cm, chest girth 94cm) were selected to develop dress forms and men's jacket block in the study. The procedure and results were follows; 1. The dress forms of somatotype YS and HD1 were provide base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New men's jacket blocks of somatotype YS and HD1 were developed based on the body surface extracted by draping and the result of comparative investigation on the conventional jacket patterns by wearing test. Also the drafting methods of new men's jacket blocks were provided. 3. Wearing test by the sensory evaluation showed that the developed jacket blocks were estimated more highly than existing patterns.

• Journal of Fashion Business
• /
• v.14 no.6
• /
• pp.146-169
• /
• 2010

For the purpose to develop the pattern of a tailored jacket for the Chinese adult women, a drawing method for the pattern of a tailored jacket was selected with the style of 'on&on', a young and casual brand of Beaucre Merchandising Co., Ltd. that has been successful in the China market, and then the measures to be applied were set up by properly combining the body measures such as the mean, mode and median of the entire group from data measured from women of 18 to 24 years old in Shanghai, China in 2008 and the mean body measures of the body type A of 2008 classified by GB/T 1335.2-1997. The pattern of a tailored jacket developed was verified for feasibility based on a wearing test and then revised for the parts with low jacket ability in general including the bust circumference, waist circumference, hip circumference, shoulder, waist back length and back area. The final measures applied for the development of a tailored jacket were 160-165cm for the height, the bust circumference of 87.7cm, waist circumference of 69.6cm and hip circumference of 92.8cm for a jacket.

• Journal of Fashion Business
• /
• v.11 no.5
• /
• pp.35-50
• /
• 2007

The purpose of this study was to investigate the result of a market research on men's jacket in their age of 25 to 35, who wear fitted jackets most, and to examine the comparative analysis of pattern and the wearing evaluation between classic jacket and fitted jacket. The results are as follows; Firstly, according to the results of a market research, 32.0% of the target owned fitted jackets, and 28.7% expressed their desire to buy only fitted jackets. This means their concern and preference for fitted jacket with which they could show up young, fresh and slim look are as high as those for classic jacket. Secondly, classic jacket showed the higher value than fitted jacket in such items as chest girth, waist girth, hip girth, sleeve's hem girth, jacket length, shoulder length, side seam length, and across shoulder point length. On the other hand, fitted jacket showed the higher value than classic jacket in back armhole length, front length, collar point length and sleeve's vent length. Thirdly, classic jacket was larger than fitted jacket in 1/2 chest girth(1.0cm), 1/2 waist girth(2.0cm), 1/2 hip girth(1.0cm), back width(0.5cm), front width(0.5cm) and side width(1.0cm). However, fitted jacket was higher than classic jacket in the armhole depth(0.5). Fourthly, the results of appearance evaluation revealed that there was a significant difference in 6 items. In other words, classic jacket was evaluated more appropriate than fitted jacket in such items as back width, back length, back neck depth, chest girth, waist girth and hip girth. And the fitted jacket had a higher value than the classic jacket in shoulder angle item. Fifthly, In the functional evaluation, fitted jacket was evaluated more uncomfortable than classic jacket. And this means that fitted jacket doesn't have a proper ease amount in each part and it has a high armhole depth compared to classic jacket. Therefore, for more comfortable patternmaking of fitted jackets, it would be required a pattern design which reflect men's own shoulder lines and women designers' flexibility that will satisfy both appearance and function.

• Journal of Fashion Business
• /
• v.18 no.3
• /
• pp.104-116
• /
• 2014

This study investigated the jacket preferences and actual fit according to body image perception of female university students in their early twenties, using a survey questionnaire method to analyze areas of dissatisfaction and improvements based on wearing experience. On the relationship between jacket and body image perception, female students with poor body image expressed the highest rate of "not satisfied" with purchase, which was significant. On buying preferences, the "Internet" was the primary place of purchase and "design" of jacket had highest consideration on the decision to buy. "Princess with a cinched - in waist" was the most preferred silhouette, and the most preferred length was "below the hip line." The most preferred cut was "basic," a jacket with a "tailored-collar of notched lapel shape," and "2-buttons." On discomfort and improvement of jacket fitness, students were most dissatisfied with "arm hole." The studies of production of a jacket which fitness and activities is both considered for female university students in their early twenties who use clothes to make them look more like their ideal body image.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.43-52
• /
• 2002

The purpose of this study was to present the plan for activation and rationalization of production of ladies' jacket and provide basic materials for improvement of the development of technologies in relation to the productivity improvement of ladies' jacket and the achievement of high quality product. For this purpose, this study attempted to investigate the present situation of jacket manufacturing process. The data is related with local ladies' jacket manufacturing companies in Seoul snd Kyonggi area. The results of this study are as follows. 1. 87.8% of the business firms responded that they acquired the productive process of jacket based on their own knowhow and 80.5% was aware of the need for the analysis of each process. The highest proportion of the business firms(65.9%) pointed out that the advantage of process analysis was the alleviation of the production time. 2. The jacket manufacturing process was made up of 4 stages such as the process of frontal/rear plate $\rightarrow$ the process of accessories $\rightarrow$ the process of completion $\rightarrow$ the process of finishing in a broad sense but composed of a total of 19 stages in detail. 3. Attachment of the sleeves(73.2), attachment of the collar(41.5%) and the formation of the overall silhouette(22.0%) were raised as the challenge in manufacturing ladies' jacket. 4. Most of the sewing business firms made use of the method of completing the collar and then stitching the outer material and the inner collar, and the line of the bodice and the outer collar as the method of stitching the tailored collar. and many of them used the method of completing the collar and then inserting it between the line of the bodice and the outer material and stitching it as the method of stitching the stand collar. They had a preference for the method of completing the sleeve and connecting it to the bodice as the method of stitching the sleeve. and used the method of treating the margin to seam of semi-lined and unlined jacket by treating it with the bias tape.