• Cartoon and Animation Studies
• /
• s.34
• /
• pp.317-344
• /
• 2014

Perspectives on the basis of arts and cultural management, this study intends to suggest improvements in core curriculums that are required in order for South Korea, a country that has initiated into the animation industry through outsourcing from big-budget animation production countries such as America and Japan, to develop its own strong base in creative animation industry. The perspectives of arts management in this context means an integration nexus between human studies, social science and management, and suggestions are as follow: First, it is crucial to understand the current trend of animation industry structure across the globe, as well as to develop the ability of co-production. Animation industry often requires technical skills, capital strength and human resources, each having equal importance. Therefore, thorough analysis of the three components in worldwide animation industry must be preceded for animation production services. To do so, collaboration with major animation creation countries is the best option and is highly encouraged, so that the national animation curriculum shall be enhanced to meet such demands and hence develop various abilities. The second is a good understanding of new-media and new-platforms. Not only the traditional distributor of animation such as television and theater, the distribution system expands its scope to a variety of online sources including pod-casts and the Internet. Under these circumstances, a deep understanding towards animation distribution system and an analysis of the new consumer channel are also of paramount importance for animation production. Third, a possibility of animation supply chain through diversified routes and media have paved the way for a possible animation production services and distribution without a mega-budget. Thus, new curriculum shall need to reinforce marketing and management aspects that will in turn help individuals to establish a self-employed creative business. Last but not least, this study further includes illustration of current curriculum of animation studies in national universities, followed by detailed suggestions for the curriculum improvements based on the above mentioned three factors. It was observed that the current curriculums have been solely focused on practical works and technical skills of animation and art studies; a four-year-course colleges that provide animation courses usually lack components of human studies, social science and management. Thus, this study proposes essential contexts of management studies that are needed for individual business and also curriculum improvements that are derived from the analysis of the current industry and the new media.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.8
• /
• pp.1-9
• /
• 2018

Emotional Intelligence is the ability to recognize, facilitate, understand and control and utilize one's and other's emotions and has been researched extensively in last 20 years. Of the four domains of emotional intelligence, Emotional Regulation, the ability for one to manage and modify one's emotional reactions in order to achieve goal-directed outcomes, with its influence on authentic leadership and change oriented organizational citizenship behavior was researched by surveying 300 nurses at large metropolitan hospitals in B city in South Korea. Previous research demonstrated in relationship based and long term oriented cultures, such as Korea, Japan and Chinese cultures, ability to regulate emotions is critical component in successful social dynamics yet research the topic is minimal in Korea. Authentic leadership is a leader displaying sincerity and authentic behavior and through such, trust is gained in followers and collaboration is formed. Change oriented organizational citizenship behavior is a proactive behavior where the individual performs behaviors not included in his job functions voluntarily. The results indicate the three out of four sub domains of authentic leadership influenced positively to change oriented organizational citizenship behavior with the exception of balanced information processing. Moreover, Emotional Regulation partially mediated between authentic leadership and change oriented organizational citizenship behavior. Such results validated previous studies that indicated authentic leadership as possible antecedents of individual proactive behaviors and by examining authentic leadership and change oriented organizational citizenship behavior with emotional regulation as a mediator proved possibility as another potential antecedent of change oriented organizational citizenship behavior in hospital setting.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.33-56
• /
• 2017

As Internet usage is becoming more common worldwide and smartphone become necessity in daily life, technologies and applications related to mobile Internet are developing rapidly. The results of the Internet usage patterns of consumers around the world imply that there are many potential new business opportunities for mobile Internet technologies and applications. The location-based service (LBS) is a service based on the location information of the mobile device. LBS has recently gotten much attention among many mobile applications and various LBSs are rapidly developing in numerous categories. However, even with the development of LBS related technologies and services, there is still a lack of empirical research on the intention to use LBS. The application of previous researches is limited because they focused on the effect of one particular factor and had not shown the direct relationship on the intention to use LBS. Therefore, this study presents a research model of factors that affect the intention to use and actual use of LBS whose market is expected to grow rapidly, and tested it by conducting a questionnaire survey of 330 users. The results of data analysis showed that service customization, service quality, and personal innovativeness have a positive effect on the intention to use LBS and the intention to use LBS has a positive effect on the actual use of LBS. These results implies that LBS providers can enhance the user's intention to use LBS by offering service customization through the provision of various LBSs based on users' needs, improving information service qualities such as accuracy, timeliness, sensitivity, and reliability, and encouraging personal innovativeness. However, privacy concerns in the context of LBS are not significantly affected by service customization and personal innovativeness and privacy concerns do not significantly affect the intention to use LBS. In fact, the information related to users' location collected by LBS is less sensitive when compared with the information that is used to perform financial transactions. Therefore, such outcomes on privacy concern are revealed. In addition, the advantages of using LBS are more important than the sensitivity of privacy protection to the users who use LBS than to the users who use information systems such as electronic commerce that involves financial transactions. Therefore, LBS are recommended to be treated differently from other information systems. This study is significant in the theoretical point of contribution that it proposed factors affecting the intention to use LBS in a multi-faceted perspective, proved the proposed research model empirically, brought new insights on LBS, and broadens understanding of the intention to use and actual use of LBS. Also, the empirical results of the customization of LBS affecting the user's intention to use the LBS suggest that the provision of customized LBS services based on the usage data analysis through utilizing technologies such as artificial intelligence can enhance the user's intention to use. In a practical point of view, the results of this study are expected to help LBS providers to develop a competitive strategy for responding to LBS users effectively and lead to the LBS market grows. We expect that there will be differences in using LBSs depending on some factors such as types of LBS, whether it is free of charge or not, privacy policies related to LBS, the levels of reliability related application and technology, the frequency of use, etc. Therefore, if we can make comparative studies with those factors, it will contribute to the development of the research areas of LBS. We hope this study can inspire many researchers and initiate many great researches in LBS fields.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.98
• /
• pp.176-199
• /
• 2020

In 2018, the National Museum of Korea purchased a pair of Japanese folding screens, respectively entitled Gathering on the Year's First "Day of the Rat" and Boating on the Oi River. Both of these two screens (hereinafter collectively referred to as the "NMK edition") have a gold background that bears the seal and ink inscription of Tosa Mitsuyoshi (1700-1772), who served as edokoro azukari, a painter in the court of Kyoto. According to the seller in New York, the screens were brought from Japan to the United States in the early twentieth century, but no other details are known. Each folding screen has six panels. The screen on the right (i.e., Gathering…) depicts "nenohi no asobi," an annual event conducted on the first "day of the rat" (according to the Asian zodiacal calendar), wherein the Kyoto imperial court ventured to the woods to gather pine seedlings. The left screen (i.e., Boating…) shows three boats traveling down the Oi River in Kyoto, representing the ritual known as "mifune" (literally, "three boats"), which involves three boats representing Chinese classical poetry (kansi), Japanese classical poetry (waka), and Japanese imperial music and dance (gagaku). Notably, these two screens are identical in theme and iconography to two screens with the same respective titles that were commissioned by Emperor Komei (1831-1867) and painted by Ukita Ikkei (1795-1859), an artist of the Yamato-e Revivalist School (fukko yamato-e), now in the collection of Sennyu-ji Temple in Kyoto (hereinafter collectively referred to as the "Sennyu edition"). While both of these themes have been painted independently numerous times, the NMK edition and Sennyu edition are the only known cases of the themes being painted as a single set. According to Diary of Official Business Between the Court and Shogunate (the journal of a court official named Hirohashi Kanetane, 1715-1781), Tosa Mitsuyoshi was commissioned in 1760 to replace the fusuma (rectangular sliding panels) of Tsunegoten, one of the buildings of the Kyoto Imperial Palace, which had been built in 1709. Notably, records show that Tsunegoten once contained a series of fusuma painted by an artist of the Kano school on the themes "Outdoor Procession on a Spring Day" and "Three Boats Cruising on the Oi River." Hence, it seems probable that Tosa Mitsuyoshi was influenced by the theme and iconography of the existing fusuma in producing his own folding screens depicting the court's visit to the forest and a cruise on the Oi River. While the practice of collecting pine seedlings on the first "rat day" of the year was an auspicious event to pray for longevity, the mifune ritual was intended to honor the greatest talents of the three aforementioned arts, which were of crucial importance to the court of Kyoto. Folding screens with such auspicious themes were commonly featured at the ceremony to enthrone the emperor or empress. Significantly, the Diary of Official Business Between the Court and Shogunate also records that Tosa Mitsuyoshi, while working as a court artist, produced two pairs of folding screens for the coronation of Empress Go Sakuramachi (1762-1771), which was held in 1763. Hence, research suggests that the NMK edition is one of the pairs of royal folding screens produced at that time.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.41-48
• /
• 1995

In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.55-71
• /
• 2013

By aircraft from Aviation regulations and institutional regulatory framework for ensuring the safety is secured. State-of-the-art aircraft, according to the type of development and diversification, modernization and new types of aircraft are operated. In particular, light aircraft and ultralight flying device such as the gyro-plane and unmanned flying devices is introduced a new device, and the device operates at these flight in accordance with the standards of the Aviation Act regulations may not occur often. Variety of light aircraft and ultra-light aircraft assembly, can be adapted for a person engaged in the business of aviation safety management and to perform the legal basis was established. Depending on the classification of newly introduced aircraft, the biggest change is the introduction of the concept of the LSA. In Korea, the various light aircraft are operating, but these aircraft range not clearly Aviation Regulations had difficulty in ensuring safety. This study examined the differences between international rules and regulations of Korea about the classification of aircraft. The LSA are included in aircraft categories internationally, but LSA will not be included in the aircraft categories, which is one of a range of powered flight device exists in Korea Aviation Act. Limit for maximum continuous power speed in a LSA, it is a limit on the right of the people who want using the high-performance plane. Also it is an international trend does not fit in, and is consistent with the intent of LSA manufacturer. Delete the content from a range of future aviation law revisions and light aircraft-related provisions to limit the maximum continuous power speed is considered to be suitable for the purpose of introducing the light aircraft industry. The laws and regulations set up in order to ensure the safety of ultralight aircraft categories existing in ultralight aircraft that exceeds the purpose of the introduction of LSA technology development at home and abroad, and is intended to reflect. These standards complement of aircraft operation is not appropriate for the situation unless the country is difficult to ensure the safety of operations. Also developed in other countries, the introduction of aircraft operating in the country, so many problems occur early revision is required.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.39-54
• /
• 2013

Recent explosive increase of electronic commerce provides many advantageous purchase opportunities to customers. In this situation, customers who do not have enough knowledge about their purchases, may accept product recommendations. Product recommender systems automatically reflect user's preference and provide recommendation list to the users. Thus, product recommender system in online shopping store has been known as one of the most popular tools for one-to-one marketing. However, recommender systems which do not properly reflect user's preference cause user's disappointment and waste of time. In this study, we propose a novel recommender system which uses data mining and multi-model ensemble techniques to enhance the recommendation performance through reflecting the precise user's preference. The research data is collected from the real-world online shopping store, which deals products from famous art galleries and museums in Korea. The data initially contain 5759 transaction data, but finally remain 3167 transaction data after deletion of null data. In this study, we transform the categorical variables into dummy variables and exclude outlier data. The proposed model consists of two steps. The first step predicts customers who have high likelihood to purchase products in the online shopping store. In this step, we first use logistic regression, decision trees, and artificial neural networks to predict customers who have high likelihood to purchase products in each product group. We perform above data mining techniques using SAS E-Miner software. In this study, we partition datasets into two sets as modeling and validation sets for the logistic regression and decision trees. We also partition datasets into three sets as training, test, and validation sets for the artificial neural network model. The validation dataset is equal for the all experiments. Then we composite the results of each predictor using the multi-model ensemble techniques such as bagging and bumping. Bagging is the abbreviation of "Bootstrap Aggregation" and it composite outputs from several machine learning techniques for raising the performance and stability of prediction or classification. This technique is special form of the averaging method. Bumping is the abbreviation of "Bootstrap Umbrella of Model Parameter," and it only considers the model which has the lowest error value. The results show that bumping outperforms bagging and the other predictors except for "Poster" product group. For the "Poster" product group, artificial neural network model performs better than the other models. In the second step, we use the market basket analysis to extract association rules for co-purchased products. We can extract thirty one association rules according to values of Lift, Support, and Confidence measure. We set the minimum transaction frequency to support associations as 5%, maximum number of items in an association as 4, and minimum confidence for rule generation as 10%. This study also excludes the extracted association rules below 1 of lift value. We finally get fifteen association rules by excluding duplicate rules. Among the fifteen association rules, eleven rules contain association between products in "Office Supplies" product group, one rules include the association between "Office Supplies" and "Fashion" product groups, and other three rules contain association between "Office Supplies" and "Home Decoration" product groups. Finally, the proposed product recommender systems provides list of recommendations to the proper customers. We test the usability of the proposed system by using prototype and real-world transaction and profile data. For this end, we construct the prototype system by using the ASP, Java Script and Microsoft Access. In addition, we survey about user satisfaction for the recommended product list from the proposed system and the randomly selected product lists. The participants for the survey are 173 persons who use MSN Messenger, Daum Caf$\acute{e}$, and P2P services. We evaluate the user satisfaction using five-scale Likert measure. This study also performs "Paired Sample T-test" for the results of the survey. The results show that the proposed model outperforms the random selection model with 1% statistical significance level. It means that the users satisfied the recommended product list significantly. The results also show that the proposed system may be useful in real-world online shopping store.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.127-142
• /
• 2016

Deep learning model is a kind of neural networks that allows multiple hidden layers. There are various deep learning architectures such as convolutional neural networks, deep belief networks and recurrent neural networks. Those have been applied to fields like computer vision, automatic speech recognition, natural language processing, audio recognition and bioinformatics where they have been shown to produce state-of-the-art results on various tasks. Among those architectures, convolutional neural networks and recurrent neural networks are classified as the supervised learning model. And in recent years, those supervised learning models have gained more popularity than unsupervised learning models such as deep belief networks, because supervised learning models have shown fashionable applications in such fields mentioned above. Deep learning models can be trained with backpropagation algorithm. Backpropagation is an abbreviation for "backward propagation of errors" and a common method of training artificial neural networks used in conjunction with an optimization method such as gradient descent. The method calculates the gradient of an error function with respect to all the weights in the network. The gradient is fed to the optimization method which in turn uses it to update the weights, in an attempt to minimize the error function. Convolutional neural networks use a special architecture which is particularly well-adapted to classify images. Using this architecture makes convolutional networks fast to train. This, in turn, helps us train deep, muti-layer networks, which are very good at classifying images. These days, deep convolutional networks are used in most neural networks for image recognition. Convolutional neural networks use three basic ideas: local receptive fields, shared weights, and pooling. By local receptive fields, we mean that each neuron in the first(or any) hidden layer will be connected to a small region of the input(or previous layer's) neurons. Shared weights mean that we're going to use the same weights and bias for each of the local receptive field. This means that all the neurons in the hidden layer detect exactly the same feature, just at different locations in the input image. In addition to the convolutional layers just described, convolutional neural networks also contain pooling layers. Pooling layers are usually used immediately after convolutional layers. What the pooling layers do is to simplify the information in the output from the convolutional layer. Recent convolutional network architectures have 10 to 20 hidden layers and billions of connections between units. Training deep learning networks has taken weeks several years ago, but thanks to progress in GPU and algorithm enhancement, training time has reduced to several hours. Neural networks with time-varying behavior are known as recurrent neural networks or RNNs. A recurrent neural network is a class of artificial neural network where connections between units form a directed cycle. This creates an internal state of the network which allows it to exhibit dynamic temporal behavior. Unlike feedforward neural networks, RNNs can use their internal memory to process arbitrary sequences of inputs. Early RNN models turned out to be very difficult to train, harder even than deep feedforward networks. The reason is the unstable gradient problem such as vanishing gradient and exploding gradient. The gradient can get smaller and smaller as it is propagated back through layers. This makes learning in early layers extremely slow. The problem actually gets worse in RNNs, since gradients aren't just propagated backward through layers, they're propagated backward through time. If the network runs for a long time, that can make the gradient extremely unstable and hard to learn from. It has been possible to incorporate an idea known as long short-term memory units (LSTMs) into RNNs. LSTMs make it much easier to get good results when training RNNs, and many recent papers make use of LSTMs or related ideas.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.315-322
• /
• 2010

To analyze our country's education program for flower decoration and occupational satisfaction of florist, 60 present florists and 60 applicants were surveyed. To investigate satisfaction of florist, the questionnaire items consisted of satisfaction for occupation etc. experienced by attendants, contents of related education, recognition from society, social treatment. And this study analyzed followings : considerations to select occupation, satisfaction on job of person who majored in related subject and non- person without such an educational background, satisfaction on present occupation, satisfaction on education period, significance of florist ability, significance of requirements for occupational development. The points which present florists and applicants consider as important were aptitude for gardening and prospect. From the analysis by major of florists, majored persons had more satisfaction than non-majored persons but there was no statistically significant difference between them. From the analysis by applicant, as in present florists, majored persons had more satisfaction than non-majored persons. For the satisfaction by career and education period of present florists and applicants, the satisfaction on education related to flower decoration or learning experiences and lecturer's teaching method showed that the lower the career is, the less the satisfaction is. Seeing the result by education period of applicants, the satisfaction on job was similar each other regardless of education period. For difference in recognition on ability by major of present florists and applicants, the result of analysis by major of present florists showed that majored persons considered the ability more important comparing to non-majored persons in the fields of gardening and making decorations. In the other hand, in the fields of quality maintenance, flower decoration, and flower distribution and management, there was no significance difference between majored and non-majored persons about the recognition of ability. The result of analysis by major of applicants showed that majored persons considered the ability more important comparing to non-majored persons in the fields of gardening, flower decoration, making decorations, flower distribution and management. For the significance of quality maintenance, majored persons wholly considered the significance more important comparing to non-majored persons but there was no significant difference. Based on the results of this study, in working as a florist, persons who majored in flower decoration had more occupational satisfaction than non-majored persons. And among the contents of education, the education related to gardening was recognized as most important. But at present the systematic and special education programs to cultivate professional florists are deficient. Therefore it is suggested that courses based on systematic educational contents which integrate theory and practice are needed to solve education problem related to flower decoration in this rapidly changing society.