• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.223-229
• /
• 2010

The bus transfer system has been extended from Seoul to Gyonggi province to provide better Seoul metropolitan area transit service in September, 2008. Moreover, the curved bus routes, except existing rapid bus routes, which cause longer travel time have been straightened out. Also, the Skip Stop operation suggested by passengers has been introduced to main stops in the newly added express bus lines. This study surveyed passengers service satisfaction for the recent adopted bus policies such as the transfer discount system and the express bus system in Seoul Metropolitan area. The survey results may be important foundation for future strategies for improvement. The survey included questionnaires about the importance and the satisfaction level on both quantitative and qualitative factors. The results were statistically analyzed by the modified IPA (Importance-Performance Analysis). As the result of the survey, the newly adopted services such as fare system, fare discount on transferring, travel time savings and increased number of stops are economically feasible and satisfactory, whereas the accessibility to stops, ventilation and air quality in vehicles are the priorities to be improved. Also, the safety and the information system is in need of improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.732-744
• /
• 1991

In this paper, performance evaluation of the common channel signalling module which performs the message transfer part function of the CCITT No.7 in TDX 1 exchange is carried out. Simulation model is developed using SLAM II network nodes according to signalling mode and transrated into SLAM II statement, . The simulation results are compared with experimental results and analyzed in order to get the maximum throughput, processing delay time, bottleneck eiement. Also, in order to get the optimized structure of the CSM, simulation is performed on the vanous case, namely, change of the number of STB, change of STG bus or B bus speed, change of CSIOB, processing speed, change of the number of transfered message per one poll.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.94-101
• /
• 2010

Optimization of interconnects among processors and memories becomes important as multiple processors and memories can be integrated on a Multi-Processor System-on-Chip (MPSoC). Since the optimal interconnection architecture is usually dependent on the applications, systematic design methodology for various data transfer requirements is necessary. In this paper, we focus on bus interconnection for MPSoC applications which use 4 ~ 16 processors. We propose a new systematic bus design methodology under performance constraints using Single Arbitration Multiple Bus Accesses (SAMBA) style bus architectures. Optimized bus architecture is found to satisfy performance constraints for a single or multiple applications. When compared to the unoptimized architecture, our method can reduce the bus switch logic circuits significantly (by more than 50% sometimes). Furthermore, low cost bus architectures can be found to satisfy the performance constraints for multiple applications.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.209-219
• /
• 2010

In this paper, a novel dynamic available transfer capability (DATC) has been computed for real time applications using three different intelligent techniques viz. i) back propagation algorithm (BPA), ii) radial basis function (RBF), and iii) adaptive neuro fuzzy inference system (ANFIS) for the first time. The conventional method of DATC is tedious and time consuming. DATC is concerned with calculating the maximum increase in point to point transfer such that the transient response remains stable and viable. The ATC information is to be continuously updated in real time and made available to market participants through an internet based Open Access Same time Information System (OASIS). The independent system operator (ISO) evaluates the transaction in real time on the basis of DATC information. The dynamic contingency screening method [1] has been utilized and critical contingencies are selected for the computation of DATC using the energy function based potential energy boundary surface (PEBS) method. The PEBS based DATC has been utilized to generate patterns for the intelligent techniques. The three different intelligent methods are tested on New England 68-bus 16 machine and 39-bus 10 machine systems and results are compared with the conventional PEBS method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.932-942
• /
• 1995

A spacecraft power system can be divided into two types : DET system(Direct Energy Transfer system) and PPT system(Peak Power Tracking system). In a DET system employing the regulated bus voltage control method, the battery charger and discharger are widely used for the bus voltage regulation. The battery charger has two different modes of operation. One is the bus voltage regulation mode and the other is the charge current regulation mode. The battery discharger is employed to provide the power when the spacecraft is in the earth's shadow or the sun is eclipsed. The operating mode, charging or discharging, is selected by a power control circuit. In this paper, small-signal dynamic characteristics of battery charging and discharging system are analyzed to facilitate design of control loop for optimum performance. Control loop designs in various operating modes are discussed. Anaylses are verified through experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2198-2202
• /
• 2003

The data transmission of MVB(Multifunction Vehicle Bus) of TCN(Train Network Communication) is divided into the periodic transmission phase and the sporadic transmission phase. TCN standard defines the event-polling method for the message transfer in the sporadic phase. However, since the event-polling method does not use pre-scheduling to the priority of the messages to be transmitted, it is inefficient for the real-time systems. To schedule message transmission, a master node should know the priority of message to be transmitted by a slave node prior to the scheduling the sporadic phase, but the existing TCN standard does not support any protocol for this. This paper proposes the slave frame bit-stuffing algorithm, with which a master node gets the necessary information for transmission scheduling and includes the simulation results of the event-polling method and the proposed algorithm.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.588-594
• /
• 2016

As more populations are getting older, the number of vulnerable pedestrians is increasing, thereby social problems related to transportations also frequently occur in different areas and situations. Many of such problems come from bus drivers who may pass bus stops not recognizing passengers about to board. In this paper, we propose a new IoT bus notification system developed to avoid these situations. Our implementation aims to gain bus service routes using publicly opened data, notify passengers about bus stop locations using GPS information and finally deliver the positions of those passengers to the bus drivers so that they can hardly miss passengers who are willing to board on the right stop. By creating an application, it was conducted by means of a GPS to communicate the location of the vehicle by means of GPS and transfer data to the location of the vehicle. Experimental results show that it is possible to accurately determine the position of passengers even in a crowded race area. The average error distance is 31m, and if the data to be processed as error is excluded, it provides a high reliability as 19m.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.7_8
• /
• pp.370-380
• /
• 2003

A large RAID system may consist of several PCI bus segments since a PCI bus segment can connect only a limited number of disks. In this paver, PCI bus transactions in a RAID system are classified in terms of the initiator and the target of the transaction. Also, the data transfer time of each transaction type is analyzed. By using the analysis results, read and write performance of two RAID system configurations are formulated. From simulation of the RAID system using the DEVS formalism, performance of the configurations are evaluated and compared with the analytical results while changing various system parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.71-81
• /
• 2008

In this paper, we propose a novel Globally Asynchronous, Locally Dynamic System(GALDS) bus and demonstrate its performance. The proposed GALDS bus is the bidirectional multitasking bus with the segmented bus architecture supporting the concurrent operation of multi-masters and multi-slaves. By analyzing system tasks, the bus architecture chooses the optimal frequency for each If among multiples of bus frequency and thus we can reduce the overall power consumption. For efficient data communications between IPs operating in different frequencies, we designed an asynchronous and bidirectional FIFO based on an asynchronous wrapper with hand-shaking interface. In addition, since systems can be easily expandable by inserting bus segments, the proposed architecture has advantages in IP reusability and structural flexibility As a test example, a four-segment bus haying four masters and four slaves were designed by using Verilog HDL. We demonstrate multitasking operations with read/write data transfers by simulation when the ratios of operation frequency are 1:1, 1:2, 1:4 and 1:8. The data transfer mode is a 16 burst increment mode compatible with Advanced Microcontroller Bus Architecture(AMBA). The maximum operation latency of the proposed GALDS bus is 22 clock cycles for the bus write operation, and 44 clock cycles for read.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.4
• /
• pp.539-555
• /
• 2015

This study proposes the methodology for measuring the time-distance accessibility on the Seoul bus system based on the T-card transaction databases and analyzes the results. T-card transaction databases contain the time/space information of each passenger's locations and times of the departure, transfers, and destination. We introduce the bus network graph and develop the algorithms for time-distance accessibility measurement. We account the average speed based on each passenger's get-in and getoff information in the T-card data as well as the average transfer time from the trip chain transactions. Employing the modified Floyd APSP algorithm, the shortest time distance between each pair of bus stops has been accounted. The graph-theoretic nodal accessibility has been given by the sum of the inverse time distance to all other nodes on the network. The results and spatial patterns are analyzed. This study is the first attempt to measure the time-distance accessibility for such a large transport network as the Seoul bus system consists of 34,934 bus stops on the 600 bus routes, and each bus route can have different properties in terms of speed limit, number of lanes, and traffic signal systems, and thus has great significance in the accessibility measurement studies.