• Journal of Korean Society of Transportation
• /
• v.13 no.4
• /
• pp.105-115
• /
• 1995

This paper deals with an operation concept of "time-transfer of buses", in which buses arrive a transfer center at the same time and allow passengers to transfer to other bus lines, so that passengerscan go anywhere all the timed-transfere buses operate with only one transfer. This timed-transfer bus system is known as an efficient operating technique which can be adopted in an area with sparsely distrubuted bus demand. A model of timed-transfer is estabilished in terms of vaious factors such as the expected(or average) arrival time, distribution of arrival time, timed-transfer cycle, shceduled departure time, etc. It is assumed that the objective of timed-transfer bus system is to minimize the total transfer waiting time. The optimal schedualed arrival time or buffer time(time required to arrive ealy in consideration of delay) is analyzed for a general case and various speicial cases. It was found that the optiaml buffer time is an inverse funcion of the timed-transfer cycl and increases with the cycle time, assumin g that there is a fixed scheduled departure time at the transfer cetner regardless of whether one or more buses fail to arrive before the scheduled departure time. If buses are to wait uhtil all the buses arrive at the transfer center, that is, the transfer departure time is vairable, the optimal scheduled arrival times can be obtained by a mathmatical programming.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.99-103
• /
• 2010

It is necessary to improve transfer impedance of express bus terminal users in order to increase the usage of public transportation. This study constructed a model for calculating transfer impedance based on bodily sensational transfer time in express bus terminal and calculated transfer impedance on major express bus terminals in Korea. The study results show that the addition of 100 meter exterior walking distance increases 3 minute travel time, 100 meter interior walking distance increases 5 minute travel time, 100 stairways increase 13 minute travel time, and escalators decreases 3 minute travel time. The calculated transfer impedance based on bodily sensational transfer time in this study can be utilized as objective criteria to compare transfer conditions of different bus terminals and to prioritize them for facility improvement. The calculated transfer impedance also can be used as facility guidelines for designing a new transit center.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2014

This study attempted to identify the characteristics of transfer trips between subways and buses in Daegu city and to analyze various impact factors that influence the number of transfer trips using a multiple regression analysis. Based on the results, this study aims to propose some policy implications to improve the operation efficiency of a transit center. As a result, it is found that the number of transfer trips is inversely proportional to transfer time, while directly proportional to the number of connected bus routes, subway's spatial location, and bus route connection index. Specifically, it is found that the number of transfer trips are mostly affected by bus route connection index.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.2
• /
• pp.332-342
• /
• 2012

The current research aims at classifying the bus stops as transfer center in order to establish the rational bus transfer systems. Existing research typically identifies characteristics of demands for bus stops and land use surrounding the bus stops and classifies and profiles the bus stops. A common problem with this type of research is that the results with cross-sectional characteristics of land use and bus stop usage do not capture the details of trip chain, the fundamental characteristics of the trips with transfer. This paper therefore examines bus stop classifications with such variables as transport mode chains, intermediate stop chains and timing chains. The analysis on the data collected on Monday 20 April 2009 for passengers of Gyeong-gi bus results in a clear classification among bus stops in terms of such trip chain variables. The research would provide useful information for the decision support of transfer stops location choice and infrastructure design.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2016

Public transportation is public service that is contributed to the convenience of the public. However, opportunity for public services in rural areas is weaker than the chance in urban areas. The purpose of this study is to evaluate accessibility of various public facilities using public transportation. To evaluate the accessibility, we calculate the various time from community center to the nearest bus stop, walking time, riding time in bus, and waiting time for transfer. The results of this study ares as follows; (1) Villages occupy 19.8% in rural areas that walking time from community center to the nearest bus stop takes over 10 minutes in integrated Chungju-si; (2) The average speed is 21.9 km/hr estimated to departure and arrival time of bus route; (3) The accessibility time from community center using the average bus speed takes 15.43 minutes to public facilities, 35.15 minutes to emergency center, 8.70 minutes to medical center, 9.70 minutes to elementary school, 16.26 minutes to middle school, and 22.61 minutes high school; (4) The transfer time of public transportation takes 13.46, 21.96, 10.48, 7.78, 11.11, 16.10 minutes to public facilities, emergency center, medical center, elementary school, middle school, and high school, respectively; (4) Traffic accessibility using bus vehicles in the East and South Chungju-si is lower than areas in the West and North Chungju-si. Some villages surrounding public offices (eup-myeon office) which have a high density of population, indicate a high traffic accessibility.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.41-47
• /
• 2019

A BIS(Bus Information System) collects, processes and analyzes information such as real-time location and operation status during bus operation. And It is a system that provides valid information to citizens, drivers, traffic centers and bus companies. Transport information system sent by an each bus is collected through GPS(Global Positioning System), DSRC(Dedicated Short Range Communications), Beacon and passed to transport information center. BIS data by collected is handled and analyzed. Next, it is transmitted to citizen, drivers and bus companies in real time. The result of 5 times simulation satisfied the test criteria(error range ${\pm}10m$) with an average error range of 3.306m, and the reliability is increased. In this paper, we propose a improved location transfer component that can provide users to quicker and more accurate location information than existing BIS using GPS of smart phone. It can be seen that reliability is improved by securing improved bus position data.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.125-133
• /
• 2012

This paper deals with the passenger transfer trips counted from smart bus-card data from Seoul transit network to understand the current operational condition of the system. Objective of this study is to relocate the location of the transit transfer centers. It delivers a bi-level programing model. The upper model is a linear 0-1 binary integer program having the objective of total travel cost minimization constrained by the number of transfer centers and the total construction budget. The lower model is an user equilibrium assignment model determining the passengers' route choice according to the transfer center locations. The proposed bi-level programming model was tested in an example network. The result showed that the proposed was able to find the optimal solution.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.13-21
• /
• 2015

Recently, land subsidence and sinkhole are generated due to a change in the groundwater level in the city. For this reason, the necessity for management of stable underground water level is on the rise. In this study, it was conducted for the underground structure that passes through the lower of bus transfer center construction site to examine the influence on the stability for underground structures to changes in the groundwater level and effective stress, the coupled finite element analysis and structural analyses were performed to evaluate stability for underground structure. It is to secure stability for underground structures according to underground water level declines. In this way, effective construction management will be made by previewing and forecasting the influence on the ground behavior and adjacent structures due to changes in the groundwater level.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.9-14
• /
• 1999

In this paper, a method of one line transmission of 622Mbps to interface a low speed part with a high speed part is introduced instead of H-BUS method of the 10 line transmission of 77.76Mbps in the 10Gbps optical transmission system. For this method, a reframing method to align the received data of 622Mbps transmission to STM(Synchronous Transfer Mode)-64 frame of SDH(Synchronous Digital Hierarchy) is described. Reframing is designed with VHDL and applied in the 10G-S4 ASIC of T14U board of 10Gbps optical transmission system.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.20-30
• /
• 2013

An intelligent grid computing architecture is proposed and developed for transient stability constrained total transfer capability evaluation of future smart grid. In the proposed intelligent grid computing architecture, a model of generalized compute nodes with 'able person should do more work' feature is presented and implemented to make full use of each node. A timeout handling strategy called conditional resource preemption is designed to improve the whole system computing performance further. The architecture can intelligently and effectively integrate heterogeneous distributed computing resources around Intranet/Internet and implement the dynamic load balancing. Furthermore, the robustness of the architecture is analyzed and developed as well. The case studies have been carried out on the IEEE New England 39-bus system and a real-sized Chinese power system, and results demonstrate the practicability and effectiveness of the intelligent grid computing architecture.