• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2017

The accurate forecasting of the public transportation's transit and arrival time has become increasingly important as more people use buses and subways instead of personal vehicles under the government's public transportation promotion policy. Using bus management system (BMS) data, which provide information on the real-time bus location, operation interval, and operation history, it is now possible to analyze the bus schedule reliability. However, the punctuality should always be considered together with the operation safety. Therefore, this study suggests a new methodology to secure both reliability and safety using the BMS data. Unlike other studies, we calculated the bus travel time between two bus stops by dividing the total travel length into 6 sections using 5 different measuring points. In addition, the optimal travel time for each bus route was proposed by analyzing the mean, standard deviation and coefficient of variation of the each section's measurement. This will ensure the reliability, safety and mobility of the bus operation.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.620-625
• /
• 2017

Recently, the solar module for charging internet devices is installed in crowded areas to offers services so that people can charge their smartphones or tablets. But this charging module can not be linked with the information related to a bus approach so people are subject to let their belongings such as smartphone, tablet pc at the bus stop while they are still charging it. This paper proposes a system to inform the smart phone when the bus is accessed by using the LPWA technology and BLE technology to resolve such under-failures. This experimental result showed that the power usage of LPWA based bus entry systems is an average of X, confirming that the long period usage of low-power can be possible for low power consumption in this results, enabling information on the bus to be transmitted to smart phones using Advertising mode of BLE.

• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.115-120
• /
• 2018

As the number ofconnected cars grows, the security of the connected cars is becoming more important. There are also increasing warnings about the threat of attacks via the CAN bus used for in-vehicle networks. An attack can attack through a vulnerability in the CAN bus because the attacker can access the CAN bus remotely, or directly to the vehicle, without a security certificate on the vehicle, and send a malicious error message to the devices connected to the CAN bus. A large number of error messages put the devices into a 'Bus-Off' state, causing the device to stop functioning. There is a way to detect the error frame, or to manage the power of the devices related to the bus, but eventually the new standard for the CAN bus will be the fundamental solution to the problem. If new standards are adopted in the future, they will need to be studied.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.12
• /
• pp.680-686
• /
• 2002

In deep-submicron (BSM) design, coupling effects between wires on the bus cause serious problems such as crosstalk delay, noise, and power consumption. Most of the previous works on bus encoding are targeted either to minimize tile power consumption on bus or to minimize the crosstalk delay, but not both. In this paper, we propose a new bus encoding algorithm that minimizes the power consumption on bus and eliminates the crosstalk delay simultaneously. We formulate and solve the problem by minimizing a weighted sum of the self transition and cross-coupled transition activities on bus From experiments using a set of benchmark designs. it is shown that the proposed encoding technique consumes at least 15% less power over the existing techniques, while completely eliminating the crosstalk delay.

• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.427-434
• /
• 2019

This study investigates the structural integrity of the amphibious tour bus under the rollover condition. The multi-purpose bus called Dual Mode Tour Bus (DMTB) which explores on land and water has been designed on top of a truck platform. Prior to the fabrication of new upper body and sailing equipment of DMTB, computational analysis investigates the rollover protection of the proposed structure including superstructure, wheels, and axles. The Computer-Aided Design (CAD) of the whole vehicle model is meshed and preprocessed under high performance using the Altair HyperMesh to attain the best mesh model suited for finite element analysis (FEA) on the proposed system. Meanwhile, the numerical model is analyzed by employing LS-DYNA to evaluate the superstructure strength. The numerical model includes detail information about the microstructure and considers wheels and axles as rigid bodies but excludes window glasses, seats, and interior parts. Based on the simulation analysis and proper modifications especially on the rear portion of the bus, the local stiffness significantly increased. The vehicle is rotated to the contact point on the ground based on the mathematical method presented in this study to save computational cost. The results show that the proposed method of rollover analysis is highly significant not only in bus rollover tests but in crashworthiness studies for other application. The critical impartments in our suggested dual-purpose bus accepted and passed "Economic Commission for Europe (ECE) R66".

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.196-207
• /
• 2023

As part of measures to address the climate crisis, buses are also being converted to electric and hydrogen buses. Local authorities need to prioritize carbon emissions when allocating newly introduced and converted electric and hydrogen buses, and as a method, consider the introduction of Low Emission Bus Zones (LEBZ) to propose the reduction of pollution from specific links. To introduce LEBZ, it is necessary to compare the carbon emissions before and after its implementation, yet there is a shortage of studies that focus solely on buses or analyze the effects of introducing LEBZ to specific links. In this paper, we utilized bus information system data to calculate and compare the effects of introducing LEBZ to bus priority lanes in Jeju. We categorized scenarios into five groups, with scenarios 1 through 4 involving the introduction of LEBZ, and scenario 5 designating cases where LEBZ was not introduced. Comparative results confirmed that in scenarios with LEBZ introduction, the reduction per km reached a maximum of 0.097t per km, whereas in cases without LEBZ, it amounted to 0.022t per km, demonstrating higher efficiency. It underscores the significance of conducting carbon emission calculations and comparing the effects of LEBZ introduction using bus information system data, which can be directly applied by local authorities to make informed and rational decisions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.131-146
• /
• 2023

Smart card data is widely used in the public transportation field. Despite the inevitability of various errors occur during the data collection and storage; however, smart card data errors have not been extensively studied. This paper investigates inherent errors in boarding and alighting station information in smart card data. A comparison smart card data and bus boarding and alighting survey data for the same time frame shows that boarding station names differ by 6.2% between the two data sets. This indicates that the error rate of smart card data is 6.2% in terms of boarding station information, given that bus boarding and alighting survey data can be considered as ground truth. This paper propose 6-step algorithm for correcting errors in smart card boarding station information, linking them to corresponding information in Bus Information System(BIS) Data. Comparing BIS data and bus boarding and alighting survey data for the same time frame reveals that boarding station names correspond by 98.3% between the two data sets, indicating that BIS data can be used as reliable reference for ground truth. To evaluate its performance, applying the 6-step algorithm proposed in this paper to smart card data set shows that the error rate of boarding station information is reduced from 6.2% to 1.0%, resulting in a 5.2%p improvement in the accuracy of smart card data. It is expected that the proposed algorithm will enhance the process of adjusting bus routes and making decisions related to public transportation infrastructure investments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.5
• /
• pp.297-306
• /
• 1986

This paper surveys circuit switching local area networks(LANs) whit topology of ring, mesh, bus and star. Emphasis of this study is given on the conceptual switching technologies of these LANs.

• IE interfaces
• /
• v.23 no.2
• /
• pp.139-146
• /
• 2010

In this paper, we present the study of a real passenger transportation system. Passenger transportation problem aims to transport passengers from bus stops to their destinations by a fleet of vehicles while satisfying various constraints such as vehicle capacity, maximum allowable riding time in a bus, and time windows at destinations. Our problem also has special issues such as mixed loading, consideration of afternoon problem together with morning problem, and transferring passengers between vehicles. Our solution approach consists of three serial procedures: bus route generation, bus scheduling, and post optimization. Efficient heuristic algorithms were developed and implemented for the procedures. The proposed solution approach has been successfully applied to several real world problem instances and could reduce about 10% to 15% of buses.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.347-350
• /
• 2004

The objective of this study is to discuss the future trend of the community bus. In doing so, we have selected Nagasaki City of Japan. Geographic Information Systems (GIS) is used for selection of the routes. In the present study we are going to add new parameters and new selection method. As a result of the study, we have been able to identify some best possible and detailed routes for the community bus operation in Nagasaki City, which meets the requirement of the welfare community as well as general passengers.