• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.25-30
• /
• 2007

In this paper, we proposed a new burst-mode optical transmitter structure which is suitable for high data rate operation such as Gb/s operation. With this structure we made a 1.25Gb/s burst-mode optical transmitter including a digitally controlled APC circuit for EPON systems using commercial 0.8m BiCMOS technology. It well functioned at 1.25Gb/s and showed good eye patterns with 53.3ps jitter, 191ps rise time and 258ps fall time. To characterize the APC function we measured optical output power as increasing external voltage VREF. The optical power is linearlyproportional to VREF at the rate of 0.293mW/V.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.144-149
• /
• 2015

This study aims to quantitatively evaluate failure pressure of wall-thinned elbow under combined load along with internal pressure, by conducting real-scale burst test and finite element analysis together. For quantitative evaluation, failure pressure data was extracted from the real-scale burst test first, and then finite element analysis was carried out to compare with the test result. For the test, the wall-thinning defect of the extrados or intrados inside the center of 90-degree elbow was considered and the loading modes to open or close the specimen maintaining a certain load or displacement were applied. Internal pressure was applied until failure occurred. As a result, when the bending load was applied under the load control condition, the intrados of the defect was more affected by failure pressure than the extrados, and the opening mode was more vulnerable to failure pressure than the closing mode. When the bending load was applied under the displacement control, it was hardly affected by failure pressure though it was slightly different from the defect position. The result of the finite element analysis showed a similar aspect with the test. Moreover, when major factors such as material properties and pipeline thickness were calibrated to accurate values, the analytical results was more similar to the test results.

• Korean Journal of Microbiology
• /
• v.32 no.1
• /
• pp.65-69
• /
• 1994

Light appears to be needed in the early and late function of the cyanophage of Synechococcus sp. and dark treatment during the first 2 hr of the replication cycle increased the virus yield to 200%. The burst size of the cyanophage multiplied in Synechococcus sp. in dark was 11% of that of control. The viral multiplication was reduced 2% in the presence of photosynthetic inhibitor, DCMU of $10^{-6}$ M, and nearly blocked in $10^{-4}$ M CCCP. These data suggested that the photosynthetic dependence of the cyanophage is greater than those of LPP-1 and AS-1, and smaller than SM-1.

• Journal of The Korean Astronomical Society
• /
• v.43 no.3
• /
• pp.95-104
• /
• 2010

We outline our GRB afterglow observation program using the 1-m telescope at Mt. Lemmon Optical Astronomy Observatory (LOAO), and report the first observations of the GRB afterglows. During the 2007B semester, we performed follow-up imaging obsrevations of 6 GRBs, and succeeded in detecting four GRB afterglows (GRB 071010B, GRB 071018, GRB 071020, and GRB 071025) while placing useful upper limits on the light curves of the other GRBs. Among the observed events, we find that three events are special and interesting. GRB 071010B has a light curve which has an unusually long jet break time of 11.8 days. For GRB 071025, its red R-I(~2) color suggests that it is likely to be at z~5. GRB 071020 has a light curve which shows a clear brightening at 0.3-1 days after the burst, where our LOAO data play a crucial role by providing an unambiguous evidence for the brightening. These are the first successful detections of GRB afterglows by a facility owned and operated by a Korean institution, demonstrating the usefulness of the 1-m telescope for transient phenomena such as GRBs up to very high redshift.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.67-74
• /
• 2004

As data rate was increased, the conventional burst-mode automatic power control circuit caused errors due to the effort of the mark density variation. To solve this problem we invented a new structured peak-comparator which could eliminate the effect of the mark density variation even in high date rate, and revised the conventional one using it. We proposed a burst-mode automatic power control circuit robust to mark density variations. We found that the peak-comparator in the proposed automatic power control circuit was very robust to mark density variations because it affected very little by the mark density variation in high date rate and in the wide variation range of the reference current and the difference current.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.10
• /
• pp.1017-1024
• /
• 2007

This study performed a series of burst tests at ambient temperature using real-scale elbow specimen containing a local wall-thinning defect at it's intrados or extrados and evaluated failure pressure of locally wall-thinned elbows. In the experiment, a 90-degree 100A, Sch. 80 standard elbow was employed, and various wall-thinning geometries, such as length, depth, and circumferential angle, were considered. From the results of experiment, the dependences of failure pressure of wall-thinned elbows on the defect geometries and locations were investigated. In addition, the reliability of existing models was examined by comparing the tests data with the results predicted from existing failure pressure evaluation models for locally wall-thinned elbow.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.117-130
• /
• 2002

Due to its salient features, the optical burst switch is becoming a key technology for the optical Internet. Within this technology, the survivability issue in the optical Internet has to be addressed because a simple failure causes severe damage to the huge amount of data carried in optical fiber. In this paper, we introduce a restoration procedure that can provide good survivability in the optical burst switch (OBS)-based optical Internet. OBS restoration can survive various types of network failure while maintaining good network performance. We propose novel restoration mechanisms, namely, "temporary Label Switched Path (LSP)" and "bossy LSP," to enhance restoration time and network utilization. The simulation results verify that the proposed OBS restoration achieves good network performance and provides good network connectivity as well.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.7-18
• /
• 2003

In this paper, a decision feedback recurrent neural network equalizer and a modified real time recurrent learning algorithm are proposed, and an adaptive adjusting of the learning step is also brought forward. Then, a complex case is considered. A decision feedback complex recurrent neural network equalizer and a modified complex real time recurrent learning algorithm are proposed. Moreover, weights of decision feedback recurrent neural network equalizer under burst-interference conditions are analyzed, and two anti-burst-interference algorithms to prevent equalizer from out of working are presented, which are applied to both real and complex cases. The performance of the recurrent neural network equalizer is analyzed based on numerical results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.984-995
• /
• 1996

Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.336-340
• /
• 2003

The frame synchronization should be acquired before performing other data-aided receiving algorithms, such as data-aided channel equalizing, beam-forming and phase, symbol timing, and frequency synchronizing, since all of them are using preamble or training sequence to estimate the amount of error from the received signal. In this paper, we present a new frame synchronization scheme for underwater ultrasonic image burst transmission system, which computes the correlation between received symbol sequence and one CAZAC sequence, composed of the latter half of the first CAZAC sequence of preamble and the first half of the second CAZAC sequence of preamble and then compares a threshold value. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample.