• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.1-10
• /
• 2007

In this paper, we proposed channel estimation scheme for LR-UWB system which has low data rate for WPAN in IEEE 802.15.4a. At the transmitter, we proposed dynamic power level allocation depends on channel condition in specific period when we modulate signal. We use two orthogonal code to estimate channel at once. It can estimate channel more accurately by using two code which shows good correlation characteristic then it can estimate more accurately by spreading gain. Using estimated channel condition, we synchronize symbol timing of transmitted signal. Then determined power allocation scheme and channel information is transmitted to transmiter side. Finally, using these information, transmiter side change the power level of repeated pulse to adopt to channel condition. Simulation is performed under S-V channel for LR-WPAN in IEEE 802.15.4a and we compare the performance with a different type of receiver type. We use coherent and non-coherent method at the receiver. Simulation result shows us at the NLOS channal performance evaluation is greater than that of LOS channel and the result is independent of receiver type. In the NLOS channel, as the signal delay spreading is big, performance evaluation is also increased.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.927-932
• /
• 2005

We investigate the effects on performance of using a partial retransmission mechanism in Optical Burst Switched(OBS) networks. In our scheme, the lost segments of a burst are retransmitted in the OBS layer. We also propose an optical resource reservation using the partial retransmission mechanism. Our scheme attempts to improve the burst contention resolution and optical channel utilization. The performance of the proposed mechanism is analyzed by NS2 simulations. Simulation results indicate that link utilization of the OBS network is improved makedly at the expense of signaling and ingress buffers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.1020-1028
• /
• 1992

In this paper, a burst-error-correcting adaptive decoding in TCM(Trellis Coded Modulation) is presented that combines maximun-likelihood decoding with a burst error detection scheme. The decoder usually operates as a Viterbi decoder and switches to a burst-error-correcting mode whenever error patterns uncorrectable by Viterbi decoder are detected. It is demonstrated that TCM using adaptive decoding method outperforms a traditional TCM on the multi-path fading channels that are busty in nature, which are like the channel environments of mobile communications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.721-729
• /
• 2004

In this paper, we applied a group scheduling algorithm to core nodes in an optical burst switching (OBS) network and measured its performance by simulation. For the case of core nodes with multi-channel input/output ports, performance of the group scheduling has been compared to that of the immediate scheduling. Since the group scheduling has a characteristic of scheduling a group of bursts simultaneously in a time window using information collected from corresponding burst header packets arrived earlier to a core node, simulation results show that the group scheduling outperforms the immediate scheduling in terms of both burst loss probability and channel utilization and the difference gets larger as the load increases. Another node configuration in which wavelength converters are equipped at the output ports has also been considered. In this case, even though both performance metrics of the group scheduling are almost the same as those of the immediate scheduling in the offered load range between 0.1 and 0.9, the group scheduling has lower wavelength conversion rate than the immediate scheduling by at least a factor of seven. This fact leads us to the conclusion that the group scheduling makes it possible to implement more economical OBS core nodes.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.167-172
• /
• 2017

In this paper, we propose a variable RGB interleaving technique for efficient data transmission in LED based visible light communication system. Visible light communication systems that utilize light as a resource for data transmission are affected by the nature of light and the three primary colors of light. However, the nature of light, such as light reflection, diffraction, and superposition, causes interference of the data to be transmitted, causing burst errors in the data. Such a problem causes the BER performance of the visible light communication system to degrade. To solve these problems, this paper attempts to utilize the variable RGB interleaving technique. Through variable RGB interleaving, data burst errors can be reduced and inter channel interference in a visible light communication system can be reduced. In addition, if the proposed system is applied to meet the QoS that depends on the importance of data or the requirements of the user, it can provide QoS requested by the user and enable efficient data transmission.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.45-52
• /
• 2004

This Paper presents a modified hard decision Viterbi decoder with an error prediction circuit enhancing performance for the burst error inputs. Viterbi decoder employs the maximum likelihood decoding algorithm which shows excellent error correction capability for the random error inputs. Viterbi decoders, however, suffer poor error correction performance for the burst error inputs under the fading channel. The proposed error prediction algorithm increases error correction capability for the burst errors. The algorithm estimaties the burst error data area using the maximum path metric for the erroneous inputs, It calculates burst error intervals based on increases in the maximum values of a path metric. The proposed decoder keeps a performance the same as the conventional decoders on AWGN channels for the IEEE802.l1a WLAN system. It shows performance inproving 15% on the burst error of multi-path fading channels, widely used in mobile systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.3-8
• /
• 2012

Two-dimensional product code has been studied for correcting burst errors on the storage systems. An RS-LDPC product code consists of an RS code in horizontal direction and an LDPC code in vertical direction. First, we detect the position of burst errors by using RS code, then LDPC code corrects the errors by using the burst error positions. In storage system, long burst errors are occurred by various reason. So, we need a strong code for correcting the long burst errors. RS-LDPC product code is good for long burst errors. However, as the storage density grows the length of the burst errors will be longer. Thus, we propose an LDPC-LDPC product code, it is strong for correcting the very long burst errors. Also, the proposed LDPC-LDPC product code performs better than RS-LDPC product code when the random errors are occurred, because a row direction LDPC code performs better than row direction RS code.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.1-10
• /
• 1998

Satellite communication is getting more important in the coming 21st century because of its wide areas sevice capability, ease of access, and fast channel establishment. As such, satellite communication networks will be the basis of the global communication system in cooperation with the ground ATM networks. In this paper, we consider an efficient transmission methodology of ATM cells over the satellite communication channel. We first analyze possible bottlenecks and performance deterioration factors in the case, and then propose an enhanced cell trasmission mechanism. In order to use satellite channel for ATM cell transmission, the application of complicated channel coding is inevitable. However, the forwared error control such as convolutional encoding brings forth burst errors, which calls for the application of some kind of interleaving mechanism to randomize the burst errors at the receiver. Another aspect which should b econsidered in satellite communication system is the inherent transmission delay, which can be very considered in satellite communication system is te inherent transmission delay, which can be very critical to the delay-sensitive ATM traffic. Therefore, we propose that the processing delay at the block interleaving stage should be controlled propose a variable-size block interleaving mechanism which utilizes the predicted transmission delay for each traffic in the queues of the transmitter. According to the computer simulation, the proposed mechanism could improve the overall performance by drastically reducing the ATM cell drop rate owing to the excessive transmission delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1054-1062
• /
• 1991

In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.

• Journal of the Optical Society of Korea
• /
• v.11 no.1
• /
• pp.44-48
• /
• 2007

A two-stage gain-clamped erbium doped fiber amplifier (GC-EDFA) using a pump laser diode and a 16 channel wavelength division multiplexing (WDM) with 0.8 nm spacing in C band of $1,545{\sim}1,560nm$ wavelength is experimentally demonstrated for a burst packet mode optical switching system.