• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1067-1076
• /
• 2013

Known as an important criterion that evaluates performance of future high-speed backbone networks, burst data loss ratio is well-studied in Optical Burst Switching networks. Current literatures mostly focus on reduce burst loss ratio without considering the system stability and link utilization after reducing. In this paper, we propose a novel framework which comes from feedback theoretic to dynamically control burst loss ratio in OBS. The proposed scheme tries to track the pre-set values of burst loss ratio and increases the stability and link utilization degree. The simulation results show that measured burst loss ratio always tracks setup reference with small errors, wavelength channel utilization is increased up to 2% and the system stability is also improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1088-1097
• /
• 1999

In this paper we describe our investigation en ATM CLR(Cell Loss Rate) in the wireless ATM Networks, which consist of wireless access nodes and wireless links. A wireless access node is modelled as the ND/D/1queue. A wireless channel is modelled as channel with single and burst error characteristics, and it can be seen that the CLR degrades on a link with burst errors than on a link with single error. Because wireless channel can be approximated as the Rayleigh or Rician fading channel and wireless communication systems are power limited, it is customary that the CLR degrades on a link with burst errors than on a link with single error. So error control method should be used to improve performance degradation caused by burst errors. We consider the forward error correction(FEC) as error control scheme for CBR traffics to improve performance degradation caused by burst errors, and analyze performance of concatenated FEC scheme through the use of CLR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.669-677
• /
• 2003

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS)-spread spectrum(SS) method applying a reference code to improve the duty rate on the transmission channel. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency the MBC has as well as improves the duty rate on the transmission channel. The improvement by this method is more significant when the received signal is weak. Simulation results show that if we increases the process gain (Gp) by 10 dB when the average burst length is 50ms, the burst length tends to be extended more than 220% of its average length, 160ms, and the frequency of generating this phenomenon increases 3.1 times more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2013-2022
• /
• 1996

Cyclic Codes can be used for burs(or time slot) synchronization as well as error detection as that the overhead bits of the burst, which would be nessary to seperate burst synchronization and error detection systems, may be eliminated. In this paper a new method for combined burst synchronization and error detection is proposed which requires CRC decoding once only, while the previous method which inspects channel error after searching for burst synchronization requeires CRC decoding twice. The proposed method has the advantage of simple implementation and reducing processing time over the previous one, still showing the same detection perfdormance. It may occur that a burst different from the actually transmitted one is falsely accepted in the presence of channel errors. The exact expression for the false acceptance probability is newly presented through a simple derivation basied on the fact that it is determined by channel errors but not by detection methods.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.177-180
• /
• 2000

Optical burst switching(OBS) is a new switching paradigm to supporting bursty traffic on the Internet efficiently. OBS separates burst level and control level. To handle data burst efficiently, the scheduling schemes in optical burst switching systems must keep track of future resource availability when assigning arriving data bursts to wavelength channels. In this paper, we evaluate the performance of three scheduling schemes which are called Horizon, Single-gap and Multiple-gap, as a basic study for the future research of Optical Internet. Thus, firstly, we analyze the trade-off between the performance and the processing overhead of each scheme. In addition, the performance of OBS system which uses Multiple-gap scheduling is evaluated in detail under various network size. We use simulation for performance evaluation in terms of burst loss rate(BLR), wavelength channel utilization and the number of management data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.894-897
• /
• 2008

This paper analyzes the throughput performance of a selective repeat (SR)/automatic repeat request (ARQ) scheme to transmit packet data in burst home network channel. To combat the high degree of error caused by transmission of home network data a robust error control scheme is a necessity. Basically, error control schemes can be divided in two categories: ARQ schemes and forward error correction (FEC) schemes. ARQ schemes are often used for reliable data transmission. The performance of packet transmission using SR-ARQ schemes for bursty channels is analyzed and simple analytical expressions of its throughput are presented. Theoretic analysis and numerical results indicate that a small number of packet sizes can get good performance in bursty home network channel.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.765-768
• /
• 2000

In this paper, we analyze the channel estimation method by using Reference symbols for burst OFDM transmission systems. We set some parameters (the number of Reference symbols, the pilot spacing in Reference symbols, the update constant of equalizer coefficients) to evaluate their performance in the fixed multipath fading channel as like indoor environment.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.2
• /
• pp.29-36
• /
• 2005

All-optical fiber-type $2{\times}32$ splitters for an Ethernet PON (passive optical network) were fabricated by using a FBT (fiber biconical tapered) process and the performance of the splitters was tested in upstream transmission of the EPON system. The $2{\times}32$ splitters was obtained by cascading $1{\times}4$ splitters fabricated by a conventional FBT process and showed -18 dB of insertion loss with 1.5 dB uniformity of output power at each channel and -0.1 dB of polarization dependent loss. The insertion loss variation was below 0.1 dB at the temperature range of $-40^{\circ}C\;to\;80^{\circ}C$. For upstream channel transmission test in the EPON system were a Zig board and a burst mode receiver. Zenko-made optical module was used for the burst mode receiver by adding functions of serializer/deserializer and clock data recovery, a Virtex II pro20 chipset and Vitesse VSC7123 were used in the Zig board for characterizing the burst mode and in the clock data recovery chipset, respectively. Startup acquisition lock time and data acquisition lock time were measured to be 670ns and 400ns, respectively, in the upstream channel transmission of the EPON system adapting the $2{\times}32$ splitter fabricated in this work.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.649-652
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,2D2) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of $10^{-3}$.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.17-22
• /
• 2004

In this paper, a concatenated RS and Turbo code is proposed for OFDM system over burst error channel. The concatenated code used in this study is a RS(255,202) code and a rate 1/2 turbo code. The turbo code uses 2 recursive systematic convolutional (RSC) code as the constituent codes and the parity bit are punctured to get the desired code rate. It is shown by simulation that the conventional OFDM system fails when there exists burst noise. The concatenated RS and turbo code obtains at least 5dB gain over the turbo code at the bit error probability of 10/sup -3/.