• Korean Journal of Ecology and Environment
• /
• v.52 no.2
• /
• pp.118-125
• /
• 2019

Swimming performance of fish is an important factor in the survival of fish. Also, swimming performance of fish is used in the form of habitat, or as a condition to consider when creating a fish ladder. However in Korea, researches in swimming performance of Korean freshwater fish were scarce and inadequate in some part, thus fish ladders were installed without considering their swimming performance. Therefore, in this study, we measured swimming performance of 4 Korean freshwater fish species to consider importance of swimming performance test. The fish used in this study were Carassius auratus, Zacco koreanus, Gnathopogon strigatus, Acheilognathus lanceolata intermedia species which was collected during October to November, 2018 at Geum River, and measurement for swimming speed of each fish was done by using $Loligo^{(R)}$ System, swim tunnel respirometer in January to February of 2019. The average value of the burst critical swimming speed ($U_{crit}$) for each species was $0.8{\pm}0.04m\;s^{-1}$ for C. auratus, $0.77{\pm}0.04m\;s^{-1}$ for Z. koreanus, $0.95{\pm}0.04m\;s^{-1}$ for G. strigatus, $0.73{\pm}0.03m\;s^{-1}$ for A. lanceolata intermedia and the average value of prolonged critical swimming speed was $0.54m\;s^{-1}$ for C. auratus, $0.67m\;s^{-1}$ for Z. koreanus, $0.7m\;s^{-1}$ for G. strigatus, $0.54m\;s^{-1}$ for A. lanceolata intermedia. Since the fish used in this experiment were collected from a small part of the water system in Korea and there were only 4 species, they were not enough to represent the species that inhabit the entire Korean water system. It will be necessary to continue evaluating the swimming performance of other freshwater species in Korea.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.7-15
• /
• 2019

The present study aimed to investigate the influence of starvation on growth, survival and swimming ability of Pacific cod Gadus macrocephalus larvae. Notochord length, musculature height, body depth, gut height and volume of yolk of reared larvae were measured to determine the growth parameters. A significant difference was observed in all morphometric characteristics before 15 DAH (days after hatching). Body depth and volume of yolk of unfed larvae were significantly smaller than those of fed larvae from 9 DAH (P<0.05). Almost all yolk in fed group was consumed at 11 DAH. Survival and growth of larvae were observed to determine the effect of delayed initial feeding (2 DAH, 3 DAH, 4 DAH, unfed). All larvae in the unfed group died by 15 DAH and the larvae in other experimental groups survived until the end of the experiment to 21 DAH. Survival rate was not significantly different between the 2 DAH group ($17.5{\pm}4.27%$) and the 3 DAH group ($20.5{\pm}1.5%$) at 21 DAH (P>0.05). However, there was a significant difference in survival rate between the 3 DAH group and the 4 DAH group ($11.7{\pm}1.52%$) (P<0.05). There was no significant difference in notochord length among the groups fed from 2 DAH, 3 DAH and 4 DAH at 21 DAH (P>0.05). The swimming ability in fed group gradually increased in both cruising and burst swimming speeds, while those abilities in unfed group gradually decreased after reaching the peak at 6 DAH in both cruise ($18.7{\pm}6.56mm/s$) and burst swimming speed ($43.5{\pm}12.65mm/s$).

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.543-548
• /
• 2005

Double-layered spheres play an important role in controlling drug delivery for pharmaceutical application, because of the low initial burst compared with single-layered spheres and targetable delivery to specific organ. But it has drawback in loading drug and controlling size. In this study, we developed double-layered spheres using relatively simple oil-in-water (O/W) solvent evaporation method witw/without ultrasonication and investigated the size variation of the double-layered microspheres on the contents of poly(lactide- co-glycolide) (PLGA). Double - layered spheres were char-acterized by scanning elecron microscope (SEM), camscope, and confocal fluorescence laser microscope (CFLM). Double-layered spheres showed smooth surfaces and obvious difference between core and corona by SEM observation and camscope. We observed the fluorescent core in the double-walled spheres composed of FlTC-dextran and PLGA using CFLM. It was found that the core of the microsphere was dextran and the corona of the fabricate microsphere was PLGA. Also, the more PLGA concentration, the more the size of the fabricating double-layered sphere observed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.65-80
• /
• 1994

In the 20th century, The artistic world was constantly producing new ideas and movements and the world of fashion responded to and reflected them all in greater of lesser degree. Dress designers have always been aware of what is happening In the arts and have always been able to use the discoveries and ideas of the artist to help them solve design problems and create fashion which are new, inventive and reflective of thier time. Up to the present, other researchers have investigated the connections between the fine arts and the Modern Fashion. In this respect, the objective of this research was to clarify the characteristics of painting of the Impressionism on the Modern Fashion. In order to investigate the relationship between the trend of painting and Modern Fashion. Especially, Impressionism's light and color affected both 20th's painting and other sorts of art. That is, the trend of the modern painting, Fauvism, Cubism, Surrealism, Abstract art, Abstract Expressionism, was influenced by Impressionism painting. Similarly, in the sihouette, line, color, fabric pattern of the Modem Fashion was represented characteristics of the Impressionism Painting. The fashion's Fauve, Paul Poiret was excited by the power of color in the same intense way as the 'wild beasts' of art. The color of his clothes during that period was bold and brilliant. Gabrielle Chanel simplified the shape of women's clothes to a square cardigan and rectangular skirt. This was a cubist concept. Art and fashion probably held hands closest in the 1930s, when Elsa Schiaparelli was creating clothes directly influenced by the Surrealist thinking of Salvador Dali. And she burst upon the fashion world with a sweater that had a trompe I'oeil bow. Soma Delaunay was one of great pioneers of Abstract in. She proceeded to mix strong and bright colors into her art and created the geometric and abstract patterns of the clothes and fabrics with her strong color. The influence of Abstract Expressionism was expressed the fabrics of the Modern Fashion. Some fabrics used in Modern Fashion are printed in a dripping pouring and splashing style. For the future, some futher research to investigate the art-fashion connection might involve establishing systematic classifications for silhouette, line, texture, color of the fashion. Moreover, in order to study the influence of fine art on the fashion, a broader approach might wish to analyze the relationship between painting and other plastic arts.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.535-539
• /
• 2001

To establish the cultural practices of persimmon in heated plastic house, the growth and flower bud differentiation of 4-year old 'Nishimurawase' persimmon tree planted in 80 L pots were investigated. Temperature was kept at above $18^{\circ}C$. The earlier heating induced the earlier flower bud differentiation, while the number of days from bud burst to flower bud differentiation was 70-75 days, which was not affected by the date of heating. The date of flower bud differentiation in 'Nishimurawase' persimmon was May 1, May 21, and June 1 in the plastic house heated from Jan. 15, Feb. 15, and Mar. 15, respectively. The number of flower primordia per bud in the plastic house was 6.2-7.1, slightly fewer than that of 7.8 in the open-field, with the tendency of increasing the number by earlier heating. The days required for the differentiation of the last flower bud primordia from the beginning of differentiation of the first bud were 40-60, and that required for the flower bud differentiation of all buds on the same shoot was 30. The total carbohydrates in shoot increased and the contents of nitrogen decreased, resulting in increased C/N ratio just before flower bud differentiation, and it coincided with the time when the total carbohydates increased above 15%. During two weeks before flower bud differentiaton, The contents of zeatin per 1 g dry matter of shoot drastically increased from $27.2{\mu}g$ to $47.3{\mu}g$, while that of IAA slightly decreased from $188.6{\mu}g$ to $172.4{\mu}g$, and that of GA decreased from $2,225{\mu}g$ to $1,555{\mu}g$.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.175-182
• /
• 2016

For application to several MHz photoacoustic imaging systems, a needle hydrophone was designed and fabricated by using PMN-PZT piezoelectric single crystal, and its characteristics were evaluated through comparison with a commercial PVDF(Polybinylidene Fluoride) hydrophone of which receiving sensitivity is known. The simulation using the KLM model results show that the peak receiving impulse response for $50{\Omega}$ terminating impedance of the fabricated hydrophone is -261.6 dB re $1V/{\mu}Pa$ and the frequency response is relatively flat over 2 ~ 12 MHz with fluctuation less than 5 dB. The measurement results using tone burst signals also show that it has higher (ave. 10.9 dB) sensitivity than the commercial hydrophone in 2 ~ 8 MHz, and the receiving sensitivity of $-255.8{\pm}2.8$ dB re $1V/{\mu}Pa$ was measured for the fabricated hydrophone. In addition, it is known that the photoacoustic signals and the image of a hair obtained by a mechanical scanned photoacoustic imaging system with the fabricated hydrophone were bigger and better than those obtained with the commercial hydrophone.

• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.1-9
• /
• 1980

This study was carried out to examine the substitution possibility into fiber pot instead of Jiffy pot for the good transplanting. Fiber pot was made of fiber, wood waste particle, and bark powder (10% of the particle weight) and also latex was added into the furnish as a binder. The pots were sprayed with just enough urea solution to prevent nitrogen deficiency of pot media coming from the breakdown of wood fiber in the pot wan during the plant growing. The utility of fiber pot was compared with that of Jiffy pot in the service test of two tree species under a green-house condition. The results obtained can be summarized as follows ; 1. Fiber pot made of 30% wood fiber+70% particle including 10% of bark powder, and 3%-latex has shown a good results like that of Jiffy pot in the sp. gr., tear factor and burst factor. For water absorption, fiber pot made of 50% fiber+50% particle, and 3%-latex got the best result. In the consideration of the above physical and mechanical properties of the fiber pot for good root penetration through the pot wall and facile handling, fiber pot made of 30% fiber+70% particle, and 3%-latex may be seemed to be good. 2. There were no harms in sapling growth in fiber pot as well as in Jiffy pot. The root penetration ability through the fiber pot was slightly inferior to that of Jiffy pot, and yet the pot damage through transportation seemed to be slighter in fiber pot than in Jiffy pot.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2017

Recently, one of the natural disasters, landslide is causing huge damage to people and properties. In order to minimize the damage caused by continuous landslide, a scientific management system is needed for technologies related to measurement and monitoring system. This study aims to establish a management system for landslide damage by prediction of slope failure. Ground behavior was predicted by surface ground deformation in case of slope failure, and the change in ground displacement was observed as slope surface. As a result, during the slope failure, the ground deformation has the collapse section, the after collapse precursor section, the acceleration section and the burst acceleration section. In all cases, increase in displacement with time was observed as a slope failure, and it is very important event of measurement and maintenance of risky slope. In the future, it can be used as basic data of slope management standard through continuous research. And it can contribute to reduction of landslide damage and activation of measurement industry.

• The Korean Journal of Pain
• /
• v.33 no.2
• /
• pp.99-107
• /
• 2020

Chronic severe pain results in a detrimental effect on the patient's quality of life. Such patients have to take a large number of medications, including opioids, often without satisfactory effect, sometimes leading to medication abuse and the pain worsening. Spinal cord stimulation (SCS) is one of the most effective technologies that, unlike other interventional pain treatment methods, achieves long-term results in patients suffering from chronic neuropathic pain. The first described mode of SCS was a conventional tonic stimulation, but now the novel modalities (high-frequency and burst), techniques (dorsal root ganglia stimulations), and technical development (wireless and implantable pulse generator-free systems) of SCS are becoming more popular. The improvement of SCS systems, their miniaturization, and the appearance of new mechanisms for anchoring electrodes results in a significant reduction in the rate of complications and revision surgeries, and the appearance of new waves of stimulation allows not only to avoid the phenomenon of addiction, but also to improve the long-term results of chronic SCS. The purpose of this review is to describe the current condition of SCS and up-to-date technical advances.