• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.183-186
• /
• 2008

Both structural analysis and hydraulic test have been conducted to confirm the burst characteristics of filament wound solid motor case. Failure criteria have been defined with bursting above 150% of MEOP and failure in the cylinder. The results of analysis showed that filament fiber in the cylinder should be broken at about 2088psig. From a hydraulic test the same failure mode and the level of 2200psig of burst pressure have been proved. With these results, it is verified that a filament wound case meets burst requirements.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.9-15
• /
• 2009

In this paper, we invented a new structure of fast ATC(Automatic Threshold Control) circuit. Using the structure we made a new burst-mode limiting amplifier with fast ATC function using commercial $0.8{\mu}m$ BiCMOS technology. It's ATC function worked so fast that even the first bit of burst-data could be detected, which confirmed that the new structure was useful for fast ATC. However, in the beginning of a burst, distortions in duty-cycle occurred and increased up to 59% of duty-cycle as amplitude of input signal increased. But we confirmed that after 10 cycles passed, duty-cycles was staying below 52% of duty-cycle for any magnitude of input signal.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.964-969
• /
• 2005

In this study, we suggested the ring creep test using the ring specimen of Arsene for estimating the burst creep properties of the cladding in stead of burst creep test. For this objective, we used the load-displacement conversion relationship of ring specimen called LCRR which had been determined on our previous study at high temperature by performing the ring tensile test and the numerical analysis. Then we carried out both the ring creep test and the burst creep test between $350^{\circ}C$ and $600^{\circ}C$ which were higher than the in-service temperature of the cladding in a reactor. The creep properties from the ring creep test with applying LCRR were compared with those from the burst creep test of closed-end specimens. From the results, it could be seen an very strong relationship between them, especially in Larson-Miller parameter. So, it is expected that we can easily predict the creep properties of not only claddings but also various small pressure pipes using the ring creep test.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.2
• /
• pp.127-136
• /
• 2012

Global climate change and urban heat island have been the main factors which changed leaf burst timing and leaf growth performance in urban forests. Therefore, the ecosystem in urban forests were modified and the types and composition of wildlives, living in the urban forests, were desperately changed due to the urban heat island. This study was done to identify phenological phenomena appeared in urban forests due to the urban climate change by comparing the morphological changes of leaves due to the change of temperature in Spring. The study focused on nine urban forests distributed in Daegu city, where weekly temperature and the morphological changes of the plants were mainly observed. Urban forests had different temperature depending on where each was located in the urban area. The difference of temperature in forests in and outside the urban area was verified by SPSS (Statistical Package for the Social Sciences), which divided the urban forests into about three groups; the one located outside the city, another group located in the middle of the city, and the other located close to the outside forests. The forests located in the middle of the city were showing the earlier leaf burst timing and leaf growth performance, while forests, distributed outside the city, were showing relatively late leaf burst timing and leaf performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.548-553
• /
• 2004

Due to the recent advance in wireless communication technology, it is now more demanding to enjoy the high quality of service in the wireless Internal. TCP, which many Internet applications depend on for the end-to-end transport service, is optimized for the wired environment. Consequently, TCP suffers from severe performance degradation in the wireless environment where the bit error rate is relatively high and the burst errors frequently take place. In this paper, we propose a Robust TCP algorithm, which can effectively react against the burst error and significantly improve the TCP performance in wireless Internet. It is shown through the simulations that the Robust TCP performs well in the wireless environment, especially under the burst error condition.

• Geomechanics and Engineering
• /
• v.1 no.2
• /
• pp.143-154
• /
• 2009

Many factors influence occurrences of rock burst in coal mines, such as mining methods, control methods of the coal roof, lithological characteristics of the roof and floor, tectonic stress, groundwater and so on. Among those factors, lithological characteristics in the roof are the intrinsic controlling factors that affect rock burst during coal mining. Tangshan colliery is one of the coal mines that have suffered seriously from rock bursts in China. In this paper, based on the investigating the lithological characteristics of coal roofs and occurrence of rock bursts in Tangshan colliery, a numerical method is used to study the influence of roof lithological characteristics on rock burst potential. The results show that the lithological characteristics in the roof have an important impact on the distributions of stresses and elastic strain energy in coal seams and their surrounding rocks. Occurrences of rock bursts in this colliery have a close correlation with the thick-bedded, medium- to fine-grained sandstones in the roof. Such strata can easily cause severe stress concentration and accumulate enough energy to trigger rock bursts in the working face during mining operations.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.85-94
• /
• 2010

Objectives : The propose of this study is to find out the clinical application of conservative treatment to the patient who has Lumbar incomplete burst fracture. Methods : We examined 1 patient with lumbar burst fracture who admitted Jaseng Hospital of Oriental Medicine. Results : In this study, the patient showed a certain degree of improvement in gait disturbance. Low back and leg pain were also reduced significantly after conservative oriental medical treatment. Conclusions : Conservative oriental medical treatment can be effective for improving symptoms of Lumbar incomplete burst fracture, decreasing pain.

• Journal of Acupuncture Research
• /
• v.38 no.2
• /
• pp.165-169
• /
• 2021

A burst fracture refers to the fracture of the anterior and middle vertebral columns which are moving into the spinal canal causing neurological impairments, generally requiring surgical treatment. We herein report a rare case of burst fracture with kissing spine in a 90-year-old man who had severe lower back pain that worsened during back extension. Considering the surgical treatment risk, he was hospitalized at a Korean medicine hospital for 85 days and underwent combined Korean medicine treatments including pharmacopuncture, herbal medicine, chuna, deep-fascia meridian therapy, walking practice, and abdominal breathing. Based on patient-reported scales, his pain was alleviated, and his physical function improved. Furthermore, his range of motion and walking time increased. This case report suggests that combined Korean medicine treatments could be an effective alternative for patients with burst fracture who have surgery risks.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.275-279
• /
• 2004

A new burst mode clock and data recovery circuit is realized that improves the previousldy-known gated-oscilletor technique with half rate clock recovery, The circuit was fabricated with 0.25um CMOS technology, and its functions were confirmed up to 1 Gbps.

• Honam Mathematical Journal
• /
• v.30 no.1
• /
• pp.33-45
• /
• 2008

Lee weight is more appropriate for some practical situations than Hamming weight as it takes into account magnitude of each digit of the word. In this paper, we obtain a sufficient condition over the number of parity check digits for codes correcting random errors and simultaneously detecting burst errors with Lee weight consideration.