• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1172-1182
• /
• 1993

본 연구에서는 버형성중의 파단을 파단전의 소성변형의 과정이 파단에 영향을 미치는 연성파단(ductile fracture)으로 간주하여 McClintock의 연성파단에 관한 모델 을 이용하여 버형성중의 파단변형도를 얻었다. 이 파단변형도가 인장시험으로부터 얻 은 파단변형도와 커다란 오차가 없음을 확인하여 편의상 인장시험에서의 파단변형도를 버형성중의 파단발생 판정기준으로 사용하였다. 버형성이 시작된 이후에 공구인선부 에서의 피삭재의 변위의 발달에 관한 모델이 제시되었고 파단변형도와 최대변형량과의 비교로부터 파단위치와 각도가 결정된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1043-1046
• /
• 2002

In this paper, drill tests were carried out by modifying drill geometry for burr minimization. Final objective of this study is to develop compatible drill shape for minimization of burr formation. These experimented results with modified drill are measured with laser sensor after performing drilling with variable material. Simultaneously, the cutting force and the torque of various drill geometry have been observed with same cutting condition to judge drill stability. As a result, burr was minimized in step drill with 75$^{\circ}$ step angle at every material.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.133-139
• /
• 2002

A number of experimental studies on burr formation in face milling operations have been pursued. They usually focus on machining parameters such as depth of cut, leed rate, spindle speed and in-plane exit angle. But it if difficult to set the correlation between burrs and the parameters on burr when such parameters are considered at the same time. Therefore, in this paper, acoustic emission (AE) is considered as an alternate way to predict burr types regardless of machining conditions. AE signals during face milling were sampled and processed, then fed into an artificial neural network to classify burr types \\\"on-line\\\".\\\".uot;.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.78-82
• /
• 2001

This paper presents the numerical analysis and experimental verification to know the metal cutting burr formation mechanism in face milling operation. Finite element method are applied to predict the 2-D burr formation process prediction. Face milling process are adjusted to analyze the characteristics of burr shapes according to various cutting conditions. The cutting parameters were investigated with cutting speed, feed rate, depth of cut. Through a few experiments, various burr types are classified according to its shape and properties.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.33-39
• /
• 2007

One of the most important processes is the face milling in processing task. It makes the smooth surface of processed goods. In processing stage, the formation of burr is inevitable. The formed burr decreases a detailed drawing and effects the safety of workers. So, it causes a deburring process for removing and a bottle-neck condition. Therefore, the study which can minimize the generation of burr is needed. In this paper, complex feature, such as line, arc, circle, spline is studied more reality than any other papers. And also, the algorithm which can predict the path of generated burr is established. Moreover, the finality goal is that the system which can produce tool-path minimized has to be developed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.951-954
• /
• 2003

Generally, for the burrs formed in machining are irregular and very sharp in shape, it is usually very difficult to measure burr accurately. But, it is proved that precision measurement for micro burr using the conoprobe sensor by conoscopic holography method is possible. We developed 3D burr measurement system using this sensor. The system is composed of Conoscopic laser Sensor, X-Y table, controller and 3D measurement program. Some measurements using the developed system are applied to burrs formed in micro drilling and piercing.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.45-52
• /
• 2006

Burrs formed during face milling operations can be very difficult to characterize since there exist several parameters which have complex combined effects that affect the cutting process. Many researchers have attempted to predict burr characteristics including burr size and shape, using various experimental parameters such as cutting speed, feed rate, in-plane exit angle, and number of inserts. However, the results of these studies tend to be limited to a specific process parameter range and to certain materials. In this paper, the Taguchi method, a systematic optimization method for design and analysis of experiments, is introduced to acquire optimum cutting conditions for burr minimization. In addition, an in process monitoring scheme using an artificial neural network is presented for the prediction of burr types.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.116-121
• /
• 1999

At the exit stage of drilling, the burr generates and deburring process is required to remove it. Since the additional process reduces productivity, a burr minimization technique is necessary in the servo system of drilling machines. In this research, cutting force is modelled with tool geometry and the optimal velocity profile with which the desired cutting force maintains is generated to minimize burr. Experiments show that the proposed velocity profile tracking effectively minimizes burr compared to the constant velocity feed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 2002

Triangulation method, conoscopic holography method and interferometry method are analyzed for effective measurement of micro burr geometry, which is formed in micro drilling. To select proper sensor, cylinder with 0.5mm diameter is measured and the result shows that conoscopic holography method is effective for measuring highly inclined surface. Burr with 1.0mm height and 30$\mu\textrm{m}$ height are measured by all methods. The conoscopic holography method is probed to be most proper method for measuring micro burr. A Program for 3D display of measured burr is developed.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.81-87
• /
• 2003

Triangulation method, conoscopic holography method and interferometry method are analyzed for effective measurement of micro burr geometry, which is formed in micro drilling. To select proper sensor, the cross section of a cylinder with 0.5mm diameter is measured and the result shows that conoscopic holography method is effective for measuring highly inclined surface in cylinder. Burrs with 1.0mm and 30${\mu}{\textrm}{m}$ height are measured by three suggested methods. As a result, the conoscopic holography method is proved to be most proper in measuring burr geometry. Burr measurement system is developed, which consists of conoscopic laser sensor, X-Y table, controller and burr measurement program. Burrs can be measured automatically and the result is displayed in 3D shape