• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.1
• /
• pp.64-72
• /
• 1994

Recently, the acid precipitation, composed primarily of dilute $H_2$S $O_4$, HN $O_3$and originating from the burning of fossil fules, has become one of the major environmental problems. This study was carried out to investigate the chemical features of precipitation at Sobaek-san Meteorological Observation Station(mean sea level; 1,340m, 36$^{\circ}$56’N, 128$^{\circ}$27' E)from May 1991 to December 1993. The major Point in this study divided the whole wind directions into two parts. And, the two parts are the north- westerly wind case and south-easterly wind case. The concentration of anions and cations in precipitation were measured by ion chromatography(Dionex 4000i). The volumn weighted mean pH and conductivity values of the whole precipitation period were 5.26, 14.3$mutextrm{s}$/cm, respectively. The order and frequency rate of the major anions concentration in the north- westerly and south easterly wind case were S $O_4$$^{2-}$(49.3%) ＞ N $O_3$$^{[-10]}$ (23.9%) ＞ C $l^{[-10]}$ (14.8%) ＞ $F^{[-10]}$ (12.0%) and S $O_4$$^{2-}$(61.1% ) ＞ N $O_3$$^{[-10]}$ (21.5%) ＞ C $l^{[-10]}$ (13.5%) ＞ F/sip -/(4.0%), respectively. The order and frequency rate of the major cations concentration in the north-westerly and south- easterly wind case were $Ca^{2+}$(49.3%) > N $H_4$$^{+}$(24.2%) >N $a^{+}$(22.4%) ＞M $g^{2+}$(14.9%) > $K^{+}$(3.8%) and N $H_4$$^{+}$(4:3.8%) $Ca^{2+}$(28.6%) ＞ N $a^{+}$(16.8%) > $K^{+}$(6.3%) > $Mg^{2+}$(4.5%), respectively. The larger anions and cations concentration values than others were S $O_4$$^{2-}$, N $O_3$$^{[-10]}$ and $Ca^{2+}$, N $H_4$$^{+}$, respectively. The correlation coefficient between pH value and ion concentrations for the north-westerly and south-easterly wind case was shown less than 0.5 except for Ca/.sup 2+/ in the statistical analysis SPSS. But the correlation coefficient for the all wind case between sulfate and cations was shown high correlation above 0.6.correlation above 0.6.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.3
• /
• pp.234-243
• /
• 2012

The wintertime high loading for atmospheric pollutants is certainly expected in the Byunsan Peninsula of Korea because of a great-scale reclamation project having construction of 33 km tidal sea dike impounding an area of over 40,000 ha and long-range transport. The goal of this study is to trace the origin of this wintertime burden for ambient particulate matter (hereafter called "PM") in the Byunsan Peninsula of Korea. The size-segregated (i.e., cutoff size from 0.01 ${\mu}m$ to 4.7 ${\mu}m$) PM sampling was conducted at a ground-based site of Byunsan Peninsula located in the west coast of Korean Peninsula during the height of dike constructing. Data archived in this study are the mass concentrations of ionic, elemental, and carbonic components in size-fractioned PM. The elemental mass of individual submicrometer particles was also analyzed. The sum of 5-source (i.e., elemental carbon, organic materials, inorganic secondary pollutants, crustal matter, and sea-salts) concentrations shows the bimodal distribution (major and minor peaks formed around $D_p$, 0.65 ${\mu}m$ and $D_p$, 4.7 ${\mu}m$, respectively) by border with 0.19 ${\mu}m$ of cutoff size. The concentrations of EC in $PM_{1.1-0.01}$ in winter and spring times were 4.62 ${\mu}g\;m^{-3}$ and 3.74 ${\mu}g\;m^{-3}$, respectively. Elemental masses of submicron individual particles are classified into two groups, i.e., the major elements (Cl, Al, Si, S, and P) and the minor trace elements. Cluster analysis differentiated the elements in submicron individual particles into 4-cluster. Among them, three clusters are in agreement with the major (Al, Si, S, and P), minor (Fe, Ca, and K), and trace compositions of coal burning. Meanwhile, Cl classified as an independent cluster has different source profile which was mainly due to the Saemangeum seawall project. Some highly toxic elements (e.g., Cr, Mn, and As (and/or Pb)) were also detected in some part of submicron individual PM. As a consequence, the combination of the Saemangeum project and winter monsoon played a considerable part in the double aggravation of wintertime air pollution in the Byunsan Peninsular.

• Korean Journal of Oriental Medicine
• /
• v.18 no.3
• /
• pp.103-110
• /
• 2012

Objectives : Fire needling has been applied as the treatment for various diseases and been getting much attention from Oriental medicine due to its excellent effectiveness as the results of clinical studies have reported. However, the research findings on the safety of treatment method, materials for the Fire needling needle materials and the possibility of burn injury during the procedure are still insufficient. Methods : A thermo imaging camera was used to confirm the temperature distribution on acupuncture needle and the treatment area during the fire needling therapy. Then the degree of thermal injury was observed by H&E stain and TUNEL assay. In addition, in order to assess the safety of acupuncture materials, we conducted MTT assay using a L6 cell line. Results : The average temperature of the skin surface was observed at $47{\sim}51^{\circ}C$ after classic fire needling and $30^{\circ}C$ after warming fire needling. Warming fire needling therapy does not induce a burn on the tissue and a third degree burn was observed locally in the muscle and skin layers after classic fire needling treatment. This confirms that hwa-acupuncture therapies do not cause major burns. According to the safety assessment test result, no cytotoxicity was detected in the warming fire needling materials. This confirms the safety of the acupuncture materials Conclusions : Various research results on the biological safety of fire needling. Since fire needling therapy induces a burn locally without leaving any scar, and as other results indicate, it is considered a safe treatment method.

• Journal of Environmental Health Sciences
• /
• v.46 no.2
• /
• pp.192-203
• /
• 2020

Objectives: The concentration distributions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenlys (dl-PCBs), and polycyclic aromatic hydrocarbons (PAHs) in fine particles were investigated to provide basic data on POP behavior and composition analysis. Methods: The concentrations of PCDD/Fs, dl-PCBs, and PAHs by particle size were evaluated for TSP, PM₁₀, and PM_2.5. Also, fine dust component analysis and factor analysis were performed to identify the source of PCDD/Fs. Results: The particle size distribution was found to account for 24.3% of >10 ㎛, 14.5% of 2.5-10 ㎛, and 61.2% of <2.5 ㎛. The average contributions of coarse particles (>2.5 ㎛) and fine particles (<2.5 ㎛) were PCDD/Fs 67%, dl-PCBs 66%, benzo (a) pyrene 83% and PAHs 84%, and the contributions of fine particles (<2.5 ㎛) were higher than coarse particles (>2.5 ㎛). However, the contributions of coarse particles increased in April to September with higher temperatures, while those of fine particles increased in February to March with lower temperatures. Conclusions: Low chlorinated (4Cl-5Cl) PCDD/Fs were more adsorbed compared to coarse particles due to the influence of pollutant migration from particulate to gas phase according to temperature rise, whereas high chlorinated (6Cl-8Cl) PCDD/Fs were more adsorbed compared to fine particles. PCDD/Fs sources were assessed to be major sources of emissions, such as incineration facilities and/or open burning.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.2
• /
• pp.287-298
• /
• 1993

In this study, generation characteristics and distribution situation of the animal fat residue were investigated to identify it's management problems and to propose alternatives for the recycling and final disposal. Generation sources were the meat distribution net-work including about 170 slaughterhouses, 280 meat-packing plants, thousands of meat shops and restaurants etc. The daily total amount of the animal fat residue is about 700 ton/day. More than 60% of the generation sources were concentrated in Seoul metropolitan area. The residue was collected by about 300 men using old-fashioned devices like handcarts, bike and auto bike, transported to the recycling plants by about 60 collection agencies. The residue was processed to produce by-products such as grease, tallow, animal feed ingredient in the recycling plants. At present, however, a great number of unlicensed, and mostly small rendering processors without having pollution control facilities do the unlawful business. These small, old fashioned and unorganized businesses are creating environmental problems by disposing the waste in improper ways such as open burning and dump. Improvement of the distribution network, the large-scale plants, and the estabilishing proper infrastructures were suggested to overcome the problems for the sound fat residues reprocessing industry.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.288-303
• /
• 2012

In this study, real time measurements of particle number size distribution in urban Gwangju, coastal Taean, and industrial Yeosu in Korea were conducted in 2008 to understand the occurrence of ultrafine particle (UFP) (<100 nm) events, the variation of its concentration among different sampling sites, and UFP formation pathways. Also, to investigate seasonal and long-term variation of the UFP number concentration, data were collected for the period of 5 years (2007, 2008, 2010, 2011, and 2012) in urban Gwangju. Photochemical and combustion events were found to be responsible for the formation of UFP in the urban Gwangju site, whereas only photochemical event led to the formation of UFP in the coastal Taean site. The highest UFP concentration was found in industrial Yeosu (the average UFP number fractions were 79, 59 and 58% in Yeosu, Gwangju, and Taean, respectively), suggesting that high amount of gas pollutants (e.g., $NO_2$, $SO_2$, and volatile organic carbon (VOC)) emitted from industries and their photochemical reaction contributed for the elevated UFP concentration in the industrial Yeosu site. The UFP fraction also showed a seasonal variation with the peak value in spring (61.5, 54.5, 50.5, and 40.7% in spring, fall, summer, and winter, respectively) at urban Gwangju. Annual average UFP number concentrations in urban Gwangju were $5.53{\times}10^3\;cm^{-3}$, $4.68{\times}10^3\;cm^{-3}$, $5.32{\times}10^3\;cm^{-3}$, $3.99{\times}10^3\;cm^{-3}$, and $2.16{\times}10^3\;cm^{-3}$ in the year 2007, 2008, 2010, 2011, and 2012, respectively. Comparison of the annual average UFP number concentration with urban sites in other countries showed that the UFP concentrations of the Korean sites were lower than those in other urban cities, probably due to lower source strength in the current site. TEM/EDS analysis for the size-selected UFPs showed that the UFPs were classified into various types having different chemical species. Carbonaceous particles were observed in both combustion (soot and organics) and photochemical events (sulfate and organics). In the photochemical event, an internal mixture of organic species and ammonium sulfate/bisulfate was identified. Also, internal mixtures of aged Na-rich and organic species, aged Ca-rich particles, and doughnut shaped K-containing particles with elemental composition of a strong C with minor O, S, and K-likely to be originated from biomass burning nearby agricultural area, were observed. In addition, fly ash particles were also observed in the combustion event, not in the photochemical event.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.260-269
• /
• 2002

The fire resistance of particulate polypropylene composite systems were investigated by using various reinforced particles such as zeolite, talc, $CaCO_3$ particles. In this study, The effect of particle size on the thermal properties of composite and the effect of reinforced particles on the fire resistance were studied. The inorganic reinforced particles used in this study were recycled zeolite(average particle diameter=85.34 $mu extrm{m}$), $CaCO_3$ (33.93 $mu extrm{m}$), and talc (18.51 $mu extrm{m}$). The fire resistance of composite systems was thoroughly examined by measuring limited oxygen index (LOI, ASTM D2863) and cone calorimetry (ASTM E1354, ISO 5660). Thermal stability of composite systems was thoroughly examined by measuring TGA. The flame retardants (DBDPO) and reinforced particles reduce the maximum heat release rate (M-HRR) in the order of Talc > $CaCO_3$ > recycled Zeolite. Comparing the cone calorimetry experimental results of the particle reinforced polymer composite system exhibited twice higher efficiency than DBDPO in polypropylene systems, and the LOI also showed similar trends to the cone calorimetry experiments. The optical and scanning electron microscopy techniques were used to investigate the composites ash layer and the core fracture surfaces in the burning process. The reinforcing inorganic particles seemed to accumulate at the surface of ash layer, and subsequently intercept the oxygen transport and heat transfer into the core area.

• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.23-30
• /
• 1983

This experiment was carried out for diminishing the material loss and the damage of human life due to the fire disaster by treating plywood with fire retardant chemical solution. At this study, we observed and measured chemical retention, burning point, maximum flame length, flame exausted time, carbonized area, and weight loss of plywood treated by each solution of ammonium sulphate [$(NH_4)_2SO_4$] and monoammonium phosphate [$NH_4H_2PO_4$]. Obtained results at the study may be summarized as follows: 1. In case of monoammonium phosphate-treated plywood, every tested item of fire retardancy was shown more excellent at the 25% chemical concentration and shown also at 9 hours treatment except maximum flame length compared with ammonium sulphate-treated plywood. 2. However in case of ammonium sulphate-treated plywood, 6 hours treatment of fire retardancy was better than 9 hours treating time. 3. Monoammonium phosphate was generally better than ammonium sulphate in every tested item.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.1
• /
• pp.2535-2548
• /
• 1972

Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life agriculture and various machincs played a main role in the land reclamation. The best method of land clearing, the time and capacity in the operation and the effect of growing crops should systematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivate 210,000ha of wasteland or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The first stage of productive power increases when weeds were mixed soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning or just removing. 2) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 3) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up of the straight roots was most difficult. But before the roots are pulling-up we do not know the forms of roots. 4) The cutting of soil from upside to under side land clearing method (II) Spent 6 hr 7 min 43 sec per 1 Danbo in doing land clearing and control method spent 4 hr 52 min 30 sec per 1 Danbo in doing land cearing. No significant difference could be found between II treatment type and I treatment type. 5) The volume of soil carried by bulldozer $270.38m^3$ per 1 Danbo in I type and in II type, $368.58m^3$ per 1 Danbo or about 36% increased in II type then in I type. But that is not a significant difference when considering the whole productive power of soil. 6) The land clearing of terrace by bulldozers cannot escape making the embankment slope of about $45^{\circ}$, and 25.3% should be decreased in the area. It is recommended to make use of the embankment slope by planting grass for cows. 7) The time of retary tilling increased 2.3 times or 1 hr 42 min 22 sec per 1 Danbo compared to the timesrequired in the harrowing. Because it mixed the Organic matter on ground and the harrowing of subsoil. 8) The havest of pasture growing on the land reclamation in natural slope is as follows. (a) The none fertilizers with reclaimed block of productivity decresed 1/10 than that of the farmland. Therefore the none fer tilizing in the cultivated pasture is unprofitable. (b) The havest of the manured IV treatment block was the best not only in the kinds of fertilizers but also in the kinds of pasture grass.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.71-79
• /
• 2014

This study was performed to test the combustive properties of Medium Density Fibreboards (MDFs) treated with chemicals of the bis-(dimethylaminomethyl) phosphinic acid (DMDAP), N,N-dimethylethylenediaminomethyl-bis-phosphonic acid (DMDEDAP), piperazinomethyl-bis-phosphonic acid (PIPEABP), and methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP). MDFs were painted in three times with 15 wt% solution of the bis-(dimethylaminomethyl) phosphinic acid and alkylenediaminoalkyl-bis-phosphonic acids at the room temperature, respectively. After drying MDF treated with chemicals, combustive properties and volatile organic compounds (VOCs) contents were examined by the cone calorimeter (ISO 5660-1), test for flame retardant (NEMA Notice No. 2012034), and gas chromatography (KS M ISO 11890-2), respectively. It was indicated that the MDFs treated with chemicals showed the longer time to combustion time (CT) = (442~492) s than that of virgin plate by reducing the burning rate except for CT treated with DMDAP. In adition, the MDFs treated with chemicals showed both of the higher char area (44.33~61.33) kg/kg and char length (10.33~11.67) cm than those of virgin plate. Especially, the MDFs treated with chemicals showed the higher mean volatile organic compounds (VOCs) (0.188~0.333) g/L than that of virgin plate within the prescribed limits. Thus, It is supposed that the combustion- retardation properties were improved by the partial due to the treated chemicals in the virgin MDF.