• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.45-51
• /
• 2002

Recently the interest for the environment is increasing. So the criterion for the evaluation of the burner has changed. For efficient driving problem, if the thermal efficiency is higher and the oxygen in exhaust gas is lower, then burner is evaluated better. For environmental problem. burner must satisfy NOx limit, soot limit and CO limit. Generally the experienced operator judge of the combustion status of the burner by the color of flame. we don't still have any satisfactory solution against it. the relation of the combustion status and the color of the flame hasn't still been established. This paper is the study about the relation of the combustion status and the color of the flame. This paper describes development of real time flame diagnosis technique that evaluate and diagnose combustion state such as consistency of components in exhaust gas, stability of flame in quantitative sense. In this paper, it was proposed on the flame diagnosis technique of burner using image processing algorithm, the parameter extracted from the image of the flame was used as the input variables of the flame diagnostic system. at first, linear regression algorithm and multiple regression algorithm was used to obtain linear multi-nominal expression. Using the constructed inference algorithm, the amount of NOx and CO of the combustion gas was successfully inferred. the combustion control system will be realized sooner or later.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.91-97
• /
• 2015

75톤급 액체로켓엔진용 가스발생기 후연소 시스템 설비를 제작하였으며, 연소기 연소시험설비 시험장에서의 설비인증 시험을 통해 그 성능을 확인하였다. 후연소 설비인증 시험은 메탄과 산소의 공급성능, 가스발생기와 후연소 설비에 설치된 가스토치의 안정적인 연소 능력을 검증하는데 있다. 단독성능 시험에서 공급시스템은 감압 없이 일정한 압력으로 메탄과 산소를 공급했으며, 가스 토치 압력은 설계조건을 만족하였다. 가스발생기 점화용 가스토치와의 연계시험에서 가스발생기 점화 성능과 연료과농 배기가스의 후연소 성능에 관한 인증 시험을 성공적으로 수행하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.172-179
• /
• 2001

Experimental studies have been carried out to find out the characteristics of the heat transfer, combustion emission and noise in the boilers without any extra firing zone for complete combustion of fuel. For the experiments a burner of premixed type and some heat exchangers were designed and manufactured. Also test facilities including a data acquisition system and various measuring devices were set up in order to measure automatically the various temperatures and flow rates of water and combustion gas. Various experiments were performed to find out the heat transfer characteristics as well as combustion emission and noise. In general, the burner which has uniform holes in the burner nozzle plate generates big combustion noise . whistling. The noise reduction method is discussed in this study. Many experimental data such as noise level, the amount of pollutant emission and heat transfer rate for different combination of heat exchangers are given as comparison bases for numerical studies.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.22-28
• /
• 1999

The purpose of this study is to investigate the NOx emission of turbulent diffusion flame formed in the after burner, which is located on the waste gas coming out from the test furnace. Three types of flame was tested and each of which was changed by adequate equivalence ratio. It is necessary to study more about NOx reduction effect in the after burner system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1994년도 제3회 학술강연회논문집
• /
• pp.39-45
• /
• 1994

Combustion characteristics of the solid composite propellants were studied from burning rate, ignition and steady combustion processes, and structure of the extinguished surfaces. Optical Vacuum Strand Burner (OVSB) system was desisted and configured to study those. Burning rates of the propellants were measured by OVSB at low pressure range by developed ten method. video camera(30 frames/s) was used to take potographs of the phenomena of ignition and combustion of propellant within the test cell of the OVSB. Burning surfaces of the propellants that were extinguished by rapid depressurization method were analyzed with Scanning Electron Microscope. (SEM).

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

• 설비공학논문집
• /
• 제3권2호
• /
• pp.103-113
• /
• 1991

This paper presents a method for estimating the noise source contribution of a pulse combustion burner in a multiple input system where the input sources may be coherent each other. By coherence function method, it is found that the biggest part of the noise source in the pulse combustion burner is generated by the part of the combustion chamber. This analysis is modeled as three input / single output system because the noise generating mechanism of the pulse combustion burner is very complicated. The coherence function method is proved to be useful tool for the identification of noise source. The overall levels of the radiated source pressure by coherence function method are compared with those measured and calculated by the frequency response function approach. The experimental results have shown a good agreement with the results calculated by the coherence function method when the input sources are coherent strongly each other. The estimation of shield effect by FRF method indicates that significant reduction can be achieved in sound radiation if only transmission path generated by the part of combustion chamber is acoustically shield.

• 대한한의학원전학회지
• /
• 제35권2호
• /
• pp.121-141
• /
• 2022

Objectives : This paper aims to examine the Yin-Yang characteristics of bland taste. Methods : Medicinals including bland taste were searched in herbology textbooks and mainly in the Bencaogangmu, of which major discourses were analyzed to examine the Yin-Yang characteristics of bland taste. Results & Conclusions : Most medicinals with bland taste were sweet-bland-cold, holding properties of cooling heat, stimulating urination and detoxification. These properties could be explained in relation to the Triple Burner's metabolism of Qi and fluids, as they stimulate perspiration and urination, improving the flow of fluids which in turn supports production of Original Qi, by working on the TB's Qi circulation system. In the bland taste discourse, it was understood that bland taste moves the Qi system and produces fluids, by first ascending then descending. Zhudanxi and the Neijing have opposing views on whether bland taste is Yin or Yang, but both saw blandness to have both Yin and Yang qualities. Characteristics of the bland taste could be better understood in relation to the Triple Burner. The phrase 'bland is attached to sweet taste[淡附于甘]' refers to the likeliness between the two tastes in that bland taste has the Central Earth qualities, integrating others and concealing itself in its blandness, its taste unspecific, mild and unstimulating thus communicating the Qi within the entire Triple Burner from Upper to Middle to Lower, as does sweet taste.

• 한국추진공학회지
• /
• 제17권2호
• /
• pp.39-45
• /
• 2013

추진제를 고에너지 금속 분말 연소시스템에 점화원으로 적용을 위한 기초 연구로서 strand burner를 이용하여 HTPB/AP/Al, HTPE/AP/Al 추진제의 연소특성을 고찰하였다. 실험은 아르곤을 사용하여 ~300 psia 까지 가압하였으며, 2개의 석영창을 이용하여 가시화하였다. 추진제 점화를 위해서 10 W의 $CO_2$ 레이저를 사용하였으며, 연소 속도 측정은 초고속 카메라를 활용한 프레임 분석 기법 및 광다이오드를 이용한 연소시간 분석 기법을 적용하였다. 스펙트로메터를 이용하여 300 nm ~ 800 nm, 1500 nm ~ 5000 nm 의 방출 스펙트럼을 분석하여 추진제 연소반응 시 발생하는 화학종을 확인하였다.

• 대한인간공학회지
• /
• 제30권3호
• /
• pp.389-394
• /
• 2011

The aims of this study are to investigate the Korean population stereotype for control-display linkage of four-burner gas-range, and to compare the results of this study with those of the existing studies. The investigation used a paper-pencil test using questionnaire with a sign code system for eliminating suggestive effect of sequential code. Two hundreds and eighty subjects participated in the investigation, among whom 254 subjects effectively responded to question for the gas-range stereotype. The results showed that type III(refer to Table 2) was chosen more frequently than type II, IV and V(p<0.01). The gender is not significant on responding rate for the type of control-burner linkage(p>0.92), while the age and occupation have significant effect on the rate(p<0.01). Based on this study, it appears that type III represents the population stereotype of control-burner arrangement for Korean. The stereotype was the same as that of Chinese, but different from that of American(type II or IV). The findings of this study would be helpful as basic data for ergonomically designing gas-range or similar products.