• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1961-1971
• /
• 2006

A soft recovery system (SRS) is a device that stops a high speed projectile without damaging the projectile. The SRS is necessary to verify the shock resistant requirements of microelectronics and electro-optic sensors in smart munitions, where the projectiles experience over 20,000 g acceleration inside the barrel. In this study, a computer code for the performance evaluation of a SRS based on ballistic compression decelerator concept has been developed. It consists of a time accurate compressible one-dimensional Euler code with use of deforming grid and a projectile motion analysis code. The Euler code employs Roe's approximate Riemann solver with a total variation diminishing (TVD) method. A fully implicit dual time stepping method is used to advance the solution in time. In addition, the geometric conservation law (GCL) is applied to predict the solutions accurately on the deforming mesh. The equation of motion for the projectile is solved with the four-stage Runge-Kutta time integration method. A small scale SRS to catch a 20 mm bullet fired at 500 m/s within 1,600 g-limit has been designed with the proposed method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.315-324
• /
• 2012

This paper presents a numerical investigation of the deflagration-to-detonation transition (DDT) of flame acceleration by a shock wave filled with an ethylene/air mixture as the combustible gas, considering geometrical changes by using obstacles and bent tubes. The model used consists of the reactive compressible Navier-Stokes equations and the ghost fluid method (GFM) for complex boundary treatment. Simulations with a variety of bent tubes with obstacles show the generation of hot spots through flame and strong shock-wave interactions, and restrained or accelerated flame propagation due to geometrical effects. In addition, the simulation results show that the DDT occurs with a nearly constant chemical heat-release rate of 20 MJ/($g{\bullet}s$) in our numerical setup. Furthermore, the DDT triggering time can be delayed by the absence of unreacted material together with insufficient pressures and temperatures induced by different flame shapes, although hot spots are formed in the same positions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.148-154
• /
• 2018

When shooting small arms, the inner surface temperature is heated up to about $700{\sim}1,000^{\circ}C$ by the friction of the bullet and the inner wall of the barrel and the combustion of propellant. High-temperature propellant gas and high-speed movement of the bullet cause corrosion of the inner wall, which is noticeable immediately in front of the chamber. In this study, the mechanical properties of Cr-Mo-V steel, which is the base material, were tested using Taguchi experimental design to find the best nitriding treatment conditions. For the nitriding process, the working time, salt bath temperature, and salt concentration were combined as three conditions and placed in the $L_9(3^4)$, orthogonal array table. The thicknesses of the white layer and the nitrogen diffusion layer were measured after nitriding under each condition in a salt bath furnace. Durability was evaluated by measuring the degree of dispersion through actual shooting because it was difficult to evaluate the mechanical properties of the cylinder inner structure. As a result, it was confirmed that the durability was optimal at $565^{\circ}C$, 1 hour, 0.5%. These optimal conditions were selected by the statistical analysis of the Minitab program(ver.17).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.405-411
• /
• 2012

Inside a rotorcraft fuel cell, pipes and components are located for fuel storage and fuel supply into the engine. Utility helicopters, operated in battle fields, fly at lower altitude compared to fixed-wing aircraft and hence are more likely to be exposed to gunfire. Since internal pressure of fluid increases when hit, the effect on LRU due to increase in pressure must taken into account when designing the aircraft for survivability. However, it is costly and time consuming to manufacture a fuel cell for gunfire test, and due to constraints from usage of live ammunition, related data gathered through numerical simulation is needed. In this study, numerical simulation on rotorcraft fuel cell exposed to gunfire was carried out using Autodyn to analyze bullet movement inside the fuel cell after hit, and internal pressure of fluid and equivalent stress on fuel cell assessed.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.11-16
• /
• 2012

Simulation is the imitation of the operation of a real-world process or system over time. It concerns the study of the operating characteristics of real systems. Typically, a simulation project consists of several steps such as data collection, coding, model verification, model validation, experimental design, output data analysis, and implementation. Among these steps of a simulation study this paper focus on statistical analysis methods of simulation output data. Specially, we explain how to develop confidence interval estimators for mean ${\mu}$ in terminating and non-terminating simulation cases. We, then, explore the estimation techniques for $f({\mu})$, where the function $f({\bullet})$ is a nonlinear that is continuously differentiable in a neighborhood of ${\mu}$ with $f'({\mu}){\neq}0$.

• The Journal of Dong Guk Oriental Medicine
• /
• v.5
• /
• pp.79-95
• /
• 1996

When we see normal gait, gait cycle is seperated as stance phase and swing phase. It needs 6 determinant of gait of pelvic rotation, pelvic tilt, knee joint of stance phase, ankle and foot motion, ankle and knee motion, and pelvic movement to be accomplished. In addition, a joint and muscle action is accomplished biomechanically at the same time with its gait cycle. In oriental medicine, the relationships between chang-fu physiology and meridian physiology are summaried as follows ; ${\bullet}$ chang-fu physiology : Spleen manages the extremities. Liver manages soft tissues. Liver stores blood. Kidney stores essences. Kidney manages bones. ${\bullet}$ meridian physiology : The Leg Greater Yang Meridian and meridian soft tissues The Leg Yang-Myeong Meridian and meridian soft tissues The Leg Lesser Yang Meridian and meridian soft tissues The Leg Greater Yin Meridian and meridian soft tissues The Leg Lesser Yin Meridian and meridian soft tissues The Leg Absolute Yin Meridian and meridian soft tissues Especially, we can find out relations between in a "blood supplied feet can walk well" that explains "blood regulations and by liver nourishing effects"that is the closest concept of muscle. Abnormal gaits are due to three causes as following; first, physical defect secoud, pain third, nervous system or instability of muscle. In oriental medicine, we can know relationship in "atrophy, numbness, stroke, convulsion, muscular dystrophy of knee, rheumatoid arthritis, five causes of infantile growing defects, five causes of softening, sprain". Especially, atrophy is the most important symptom. Gait evaluation should be emphasized where a point can walk 8 feet to 10 feet considering stride width, stride length, the body weight center, stride number, flexion, extension, rotation of a joint as a standard factor. The point is we should find out something strange in a patient's side, front and back view. After that we should find out its cause as an index that we can observe abnormal findings in a joint and muscle.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.60-65
• /
• 2015

In this paper, we used the sound of gunshots recorded by multiple microphones to increase the accuracy of the calculation of the distance between sniper and the microphone array. This method is crucial for achieving military objectives. Gunshots are comprised of the explosion of driving gas from the muzzle and the supersonic shock wave from the flying bullet. The original distance calculation method compares the time difference of arrival and angle of incidence to estimate the sniper's location. The disadvantage of this method is that when the angles of incidence coincide the margin of error increases, to solve this problem we suggest a new method using the characteristic changes of the shock wave with the increase of perpendicular distance between the microphone and the trajectory of the bullet. This theory is verified by experiments.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1746-1751
• /
• 2007

The bullet train runs more than 200km/h so that it is invisible to the naked eye. For this reason, KTX solely dependent on the ATC operation system. Above all things, 'stability' and 'regular time' are essential to Train Control Operation system. But intermittently, there is a signal transmission problem between ATC operation facilities and ground equipments. which is caused by wheel sliding and friction coefficient between wheel and rail when the train starts. This paper analyzed train service data for one year for accurate survey. In addition, this thesis examines the main cause of a signal transmission problem through simulation and experiment. Further, the method to solve the conventional problem is presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.2
• /
• pp.177-184
• /
• 2016

This paper presents a strike velocity estimation using the recursive Bayesian filter that operates both correction and prediction models to probabilistically remove noises of sensors and accurately estimate the strike velocity during the real-time experiments. Four different types of bullets such as 5.56 mm M193, 7.62 mm M80, 5.45 mm 7N10 and 7.62 mm MSC were used to validate the proposed method. Compared to the existing method, the proposed method statistically results in higher stability of the strike velocity estimation as well as its reliability for the ballistic limit velocity computation.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.11
• /
• pp.1711-1716
• /
• 2005

Fragmentations and ion-molecule reactions of ionized cyclohexane propionic acid and cyclohexane butyric acid were studied using FTMS and theoretical calculations. The difference in bond dissociation depending on the aliphatic chain length was investigated and mechanisms for the possible rearrangements depending on the aliphatic carbon length were suggested. The most abundant fragment ion of the ionized cyclohexane propionic acid was c-$C_6H_{11}CH_2\;^+$ formed from the molecular ion by the direct C-C bond cleavage, while that of the ionized cyclohexane butyric acid was c-$C_6H_9C(OH)=OH^+$ formed by rearrangement of the molecular ion from the acid to diol form and loss of propyl radical. Stabilities of the radical and distonic ions of $C_nH_{2n}O^{+\bullet}$ formed from the molecular ion were compared. Protonated molecules were dissociated into smaller ions by losing one or two water molecules. The $[nM + H]^+$, $[nM + H - H_2O]^+$, and $[nM + H - 2H_2O]^+$ with n = 2 and 3 were generated by solvation with the neutral molecules in the ICR cell at long ion trapping time.