• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.979-982
• /
• 2013

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.353-358
• /
• 2022

Bulky iron-core potential transformers (PT) are installed in a tank of gas insulated switchgears (GIS) for a system voltage measurement in power substations. In this paper, we studied an electronic voltage transformer (EVT) embedded in a spacer for miniaturization, eco-friendliness, and performance improvement of GIS. The prototype EVT consists of a capacitive probe (CP) that can be embedded in a spacer and a voltage Follower with a high input and a low output impedance. The CP was fabricated in the form of a Flexible-PCB to acquire the insulation performance and to withstand vibration and shock during operation. Voltage ratio of the prototype EVT is about 42,270, and the frequency bandwidth of -3 dB ranges from 0.33 Hz to 3.9 MHz. The voltage ratio error evaluated at about 6%, 12% and 18% of the rated voltage of 170 kV was 0.32%, and the phase error was 12.9 minutes. These results were within the accuracy for the class 0.5 specified in IEC 60044-7 and satisfy even in ranges from 80% to 120% of the rated voltage. If the prototype EVT replaces the conventional iron-core potential transformer, it is expected that the height of the GIS could be reduced by 11% and the amount of SF₆ will be reduced by at least 10%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.175-181
• /
• 2024

In electrical power substations, bulky iron-core potential transformers (PTs) are installed in a tank of gas-insulated switchgear (GIS) to measure system voltages. This paper proposed a low-power voltage transformer (LPVT) that can replace the conventional iron-core PTs in response to the demand for the digitalization of substations. The prototype LPVT consists of a capacitive voltage divider (CVD) which is embedded in a spacer and an impedance matching circuit using passive components. The CVD was fabricated with a flexible PCB to acquire enough insulation performance and withstand vibration and shock during operation. The performance of the LPVT was evaluated at 80%, 100%, and 120% of the rated voltage (38.1 kV) according to IEC 61869-11. An accuracy correction algorithm based on LabVIEW was applied to correct the voltage ratio and phase error. The corrected voltage ratio and phase error were +0.134% and +0.079 min., respectively, which satisfies the accuracy CL 0.2. In addition, the voltage ratio of LPVT was analyzed in ranges of -40~+40℃, and a temperature correction coefficient was applied to maintain the accuracy CL 0.2. By applying the LPVT proposed in this paper to the same rating GIS, it can be reduced the length per GIS bay by 11%, and the amount of SF6 by 5~7%.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.293-296
• /
• 2012

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.280-286
• /
• 2015

Two series of unsymmetric dimesogenic compounds containing a butylene or pentamethylene group as the flexible spacer were synthesized and their thermal and mesomorphic properties were studied. Mesogenic groups of the synthesized compounds consisted of a cholesteryl and an azobenzene group with lateral substituent. Chemical structures and mesomorphic properties of the synthesized compounds were investigated by FT-IR, $^1H$-NMR, differential scanning calorimeter (DSC), and polarizing optical microscope (POM). All synthesized compounds, apart from $D5-OCH_3$, showed enantiotropic liquid crystal phases. Compounds having an even number of carbon atoms in the flexible spacer exhibited wide mesophase temperature ranges and high isotropic transition temperatures. Regarding the effect of lateral substituents, compounds with bulky substituents exhibited decreased mesophase temperature ranges and isotropic transition temperatures, while those with polar substituents showed the increased thermal stability of the smectic phase.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.445-451
• /
• 2015

Semi-flexible liquid crystalline polymers containing a mesogenic group and an octamethylene flexible spacer in the main chain were synthesized by solution polycondensation. The mesogenic group in the polymer consists of four aromatic rings connected by ester and ketone, ether, sulfide, methylene, sulfone, or isopropylidene linkage groups. This paper discusses effects of the central linker of the mesogenic group on polymer properties. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), and polarizing optical microscope (POM). Polymers having bent linkage groups exhibited low thermal transition temperatures, narrow mesophase temperature ranges, low liquid crystallinity, and good solubilities in organic solvents, while those having bulky linkage groups were amorphous and exhibited high glass transition temperatures.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.306-311
• /
• 2013

A series of liquid crystalline polyesters containing the 4-chloro benzoate group on the hydroquinone unit of rigid group were synthesized through solution polymerization of 2,5-di(4-chlorobenzoate)hydroquinones and 4,4'-dicarboxy-${\alpha},{\omega}$-diphenoxy alkane. The structure and properties for synthesized polymers were investigated by $^1H$-NMR, FT-IR, DSC, TGA, and POM. As result of investigations, The presence of the methylene group and bulky lateral groups in polymer chain have a great influence on the properties of polymers such as solubilities and thermal transitions. The optical textures of polymers revealed a weak birefringence in the melt and indicated that they form nematic mesophase. All polymers have very narrow mesophase temperature ranges.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.47-52
• /
• 2014

A series of liquid crystalline polyesters containing X-shaped mesogenic groups in main chain were synthesized through the solution polymerization of 2,5-di(4-substituted benzoate)hydroquinones and 4,4'-dicarboxy-1,8-diphenoxyoctane. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), polarized optical microscopy (POM) and wide angel X-ray diffraction (WXRD). Inherent viscosities (${\eta}_{inh}$) of polymers were measured between 0.35 and 0.66 dL/g in 1,1,2,2-tetrachloroethane, and they were easily soluble in most of organic solvents used for this experiment. All polymers revealed relatively low melting transition temperature ($T_m$) and crystallinity, and also showed thermotropic nematic liquid crystallinity when they were heated to their melting temperatures. These properties of polymers were presumably due to the presence of the bulky substituting groups on the hydroquinone unit in mesogenic group.