• 한국물환경학회지
• /
• 제24권3호
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.104-111
• /
• 1998

The utilization of food garbage as composting was investigated by using the batch reactor and by varying the initial temperature of the fermentation reactors. As the straw controlled under 50 to 55% of moisture content and mixed 5% of EM(Effective Micro-organisms) microbial agent. An agitator continuously operated 1 rpm, supplying the amount of air(2l/kg.min). Reactor temperature changed three type of 40$\circ$C, 50$\circ$C, 60$\circ$C. In the case of 50$\circ$C operated 72 hr after organic contents showed lowest 48%, and weight reduction rate of showed 77%. The reaction gas was showed 30 min after 19. 9% of the lowest level at 20.9% concentration of oxygen and CO$_2$ gas was produced 0.9% due to organic disintegration on initial react time. NH$_4$, H$_2$ and CH$_4$ gas concentration showed 589 ppm lhr after, 83 ppm and 0.3%, but 8hr after gas product was complete. As using the straw of bulking agent, the Reduction by disintegration should be more effectively than composting.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.223-232
• /
• 2018

Two novel types of construction detailings, including using the distributive beam and the inner ring diaphragm in the joint between large-section CFT columns and outrigger truss to enhance the transferring efficiency of huge vertical load, and using the T-shaped stiffeners in the steel tube of large-section CFT columns to promote the local buckling capacity of steel tubes, were tested to investigate their working mechanism and design methods. Experimental results show that the co-working performance between steel tube and inner concrete could be significantly improved by setting the distributive beam and the inner ring diaphragm which can transfer the vertical load directly in the large-section CFT columns. Meanwhile, the T-shaped stiffeners are very helpful to improve the local bulking performance of steel tubes in the column components by the composite action of T-shaped stiffeners together with the core concrete under the range of flange of T-shaped stiffeners. These two approaches can result in a lower steel cost in comparison to normal steel reinforced concrete columns. Finally, a practical engineering case was introduced to illustrate the economy benefits achieved by using the two typical detailings.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.136-143
• /
• 1999

This study was conducted to evaluate the degradation characteristics of waste cigarette filters under 0, 5, 10, and 15cm in depth from soil surface by environmental conditions. Weather was the most important factor during degradation of waste cigarette filters in this study. Bulking of cellulose acetate filaments exposed on soil surface was observed after 2 months, but the form of filter was kept up after 12 months. The treated cigarette filters in soil landfill revealed a little different degradation pattern at each soil landfill depth, The sample in 5cm depth of soil was more degraded then other site. A fluffy appearance of cellulose acetate filaments in the control filter rods was also developed more strongly in soil landfill then on soil surface. From the observation of waste cigarette filters by scanning electron microscopy, much degradation of the fiber of waste cigarette filters could be ascertained in soil landfill. The weight of waste cigarette filters under 5cm from soil surface was reduced about 50%, and the tensile strength of the samples in soil surface and under 5cm from soil surface were reduced 66.0% and 92.4%, respectively. The microbial experiment date that the viable cell number in microbial population and cellulolytic microorganisms showed the maximum values under 5cm from soil surface, suggest that microorganisms in soil play an important roll in the degradation of acetate cigarette filters.

• 한국작물학회지
• /
• 제50권1호
• /
• pp.45-54
• /
• 2005

This study was carried out to investigate the patterns of dry matter (DM) production and accumulation, and to screen the relationships between related major growth characters and DM accumulation in four cassava varieties in Bogor $(6^{\circ}19'-6^{\circ}47'S,\;106^{\circ}21'-107^{\circ}13'E)$, West Java, Indonesia. Gading and Adiral developed an enough source and canopy in short at the early growth phase and then translocated assimilates to storage roots with a higher partitioning rate, even these varieties were considered as early-bulking varieties, which have superior source and sink potentials in increasing yield and DM of tubers. The root/shoot ratio (R/SR), total dry weight (TDW), leaf area duration, leaf area index (LAI), and number of tubers showed higher positive correlations with the dry weight of roots (DWR), and the direct effects of TDW, R/SR, and LAI on the DWR were higher. These characters were considered to be useful target characters to screen cassava varieties with high yield potential and high DM in aspect of tuber production.

• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.175-187
• /
• 2020

The theories having been developed thus far account for higher-order variation of transverse shear strain through the depth of the beam and satisfy the stress-free boundary conditions on the top and bottom surfaces of the beam. A shear correction factor, therefore, is not required. In this paper, the effect of surface on the axial buckling and free vibration of nanobeams is studied using various refined higher-order shear deformation beam theories. Furthermore, these theories have strong similarities with Euler-Bernoulli beam theory in aspects such as equations of motion, boundary conditions, and expressions of the resultant stress. The equations of motion and boundary conditions were derived from Hamilton's principle. The resultant system of ordinary differential equations was solved analytically. The effects of the nanobeam length-to-thickness ratio, thickness, and modes on the buckling and free vibration of the nanobeams were also investigated. Finally, it was found that the buckling and free vibration behavior of a nanobeam is size-dependent and that surface effects and surface energy produce significant effects by increasing the ratio of surface area to bulk at nano-scale. The results indicated that surface effects influence the buckling and free vibration performance of nanobeams and that increasing the length-to-thickness increases the buckling and free vibration in various higher-order shear deformation beam theories. This study can assist in measuring the mechanical properties of nanobeams accurately and designing nanobeam-based devices and systems.

• 상하수도학회지
• /
• 제11권3호
• /
• pp.67-78
• /
• 1997

The objective of study was to examine to transient response of hydraulic shock loading in activated sludge process for treatment of municipal sewage. The general experiment approach was to operate the system under steady-state(pre-shock), then to apply step changes during 24hours in fourfold hydraulic shock loading at the same organic loading. Performance was assessed in both the transient state and the new steady-state(post-shock). Three bench scale activated sludge reactors were operated to investigate the effect of fourfold hydraulic shock loading on TSS and COD removal efficiency. In activated sludge reactors operated with 13hours and 7hours of HRT, effluent quality of all reactors was not changed for few effects, and also showed no foaming and no sludge bulking. Those results are the same as sludge withdrawn reactors. The effect of fourfold hydraulic shock loading on the activated sludge reactors operated with 3hours of HRT was most severe. The effluent quality was deteriorated significantly and generate foaming in reactors. Less than 24hours after the fourfold shock loading applied, the activated sludge system seemed to attain a new steady-state condition as show by effluent.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.54-59
• /
• 2021

In this work, narrow-band green-emitting CsPbBr3 particles are embedded in commercialized glass composites by a facile dry process. By optimizing the method through sintering in glass frit (GF) composites including CsBr and PbBr2, used as precursors, the encapsulation of CsPbBr3 particles made them waterproof with green fluorescence. To improve the fluorescent properties by reducing aggregation of CsPbBr3, fumed silica (FS) is additionally used to help particles avoid bulking up in the glass matrix. The CsPbBr3 perovskite/glass composites are characterized using scanning electron microscopy (SEM) images and energy-dispersive X-ray spectroscopy (EDS) maps, which support the existence of CsPbBr3 particles in the glass matrix. The photoluminescence (PL) properties demonstrate that the emission spectrum peak, full width at half maximum (FWHM), and photoluminescence quantum yield (PLQY) values are 519 nm, 17 nm, and 17.7 %. We also confirm the water-resistant properties. To enhance water/moisture stability, the composite sample is put directly into water, with its PLQY monitored periodically under UV light.

• Journal of Microbiology and Biotechnology
• /
• 제27권4호
• /
• pp.856-867
• /
• 2017

Supplement of dietary fibers (DF) is regarded as one of the most effective way to prevent and relieve chronic diseases caused by long-term intake of a high-fat diet in the current society. The health benefits of soluble dietary fibers (SDF) have been widely researched and applied, whereas the insoluble dietary fibers (IDF), which represent a higher proportion in plant food, were mistakenly thought to have effects only in fecal bulking. In this article, we proved the anti-obesity and glucose homeostasis improvement effects of IDF from pear pomace at first, and then the mechanisms responsible for these effects were analyzed. The preliminary study by real-time PCR and ELISA showed that this kind of IDF caused more changes in the gut microbiota compared with in satiety hormone or in hepatic metabolism. Further analysis of the gut microbiota by high-throughput amplicon sequencing showed IDF from pear pomace obviously improved the structure of the gut microbiota. Specifically, it promoted the growth of Bacteroidetes and inhibited the growth of Firmicutes. These results are coincident with previous hypothesis that the ratio of Bacteroidetes/Firmicutes is negatively related with obesity. In conclusion, our results demonstrated IDF from pear pomace could prevent high-fat diet-induced obesity in rats mainly by improving the structure of the gut microbiota.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.126-126
• /
• 2017

본 연구는 가축분뇨를 퇴비화 하는 과정에서 흔히 사용되는 수분조절제인 톱밥, 왕겨 등의 가격적 부담으로 인해 좀 더 가격이 저렴한 수분조절제들의 성분을 비교 분석하여 어떤 차이가 있는지 확인하기 위하여 실시되었다. 이를 위해 6가지 수분조절제를 토대로 유도결합플라즈마분광계 장비를 이용하여 화학적 분석, 인장시험기를 이용하여 물리적 분석을 하였다. 화학적 분석을 통해 수분조절제 내 함유되어 있는 성분들을 분석하였으며 물리적 분석을 통해 중량, 함수율, 흡수율, 인장강도 등을 측정하였다. 화학적으로 분석을 했을 시 K, Cd, Pb, Ni, Zn, Cu, Cr, As 등을 측정을 하였으며 앞서 분석했던 각각의 성분들은 농촌진흥청에 명시되어 있는 유해성분의 최대량보다 대부분 적게 측정이 되었다. 물리적으로 분석을 했을 시, 각 수분조절제의 함수율은 최소 10.29%에서 최대 16.07%까지 측정이 되었다. 전단강도는 기존 상태가 가장 높게 측정이 되었으며 다음으로 건조상태 흡수상태로 측정이 되었다. 일반적으로 사용하기에는 흡수율이 가장 높은 우드 브리켓-1이 가장 적합한 것으로 판단된다.