• Environmental Engineering Research
• /
• v.21 no.4
• /
• pp.384-392
• /
• 2016

The aim of this study was to investigate the removal efficiency of $17{\alpha}$-methyltestosterone (MT) from aqueous solution by Salvinia cucullata Roxb. ex Bory in an active plant-based reactor with a specific focus on linear regression analysis for the sorption phenomena of MT onto the plant roots. A high performance liquid chromatographic method using UV detection (245 nm) was used to analyse the samples. The batch experiments of the active plant reactor (APR) were established to investigate the ability of Salvinia cucullata to remove MT from the liquid phase. The results revealed that 40% and 60% removal of MT from the liquid phase was observed at 5 min. and at 4 h, respectively. Salvinia cucullata can effectively remove MT from the aqueous solution in APRs. Kinetic studies revealed that the sorption phenomena of MT by Salvinia is best described using a linearized pseudo - second order model. Based on the kinetic parameters, it is likely that during the first 4 h of the contact (t = 0 to t = 4 h) sorption is the major driving mechanism of the disappearance of MT from aqueous solutions. However, at higher MT concentrations, diffusivity of MT has a significant effect on the migration of MT from the bulk stream to the root surface. The isotherm analysis revealed that the sorption kinetics favourably followed pseudo second-order. The results of isotherm analysis have indicated that the sorption of MT onto the root surfaces of Salvinia cucullata was favourable and almost irreversible.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.350-354
• /
• 2013

In this study, porous titanium samples were manufactured by space holder methods using two kinds of urea and sodium chloride space holders. Three-dimensional pore structures were obtained by a computed-tomography (CT) technique and utilized for finite element analysis in order to investigate the mechanical properties. The CT-based finite element analyses were in better agreement with the experimental results than unit cell model-based analyses. Both the experimental and CT-based results showed the same tendency that the elastic modulus decreased with increasing the porosities. The total porosity of the bulk body plays a key role in determining the elastic modulus of porous materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2229-2233
• /
• 2015

The permeability of HMA(hot mixed asphalt) is a major influencing factor for long-term performance of the pavement. Especially, the lift thickness of the pavement during construction causes a wide range of physical properties of HMA. This study investigates the correlationship between the lift thickness and the physical properties of HMA through a series of laboratory experiments. The specimens were cored from a construction site of the dense graded asphalt pavement. The cored samples have various lift thickness and the number of compaction for the study. The results of the study show that the permeability of the sample decreases with the apperant density and t/NMAS, and the air void ratio. Therefore, the commonly used construction method as a constant lift thickness regardless of conditions needs to be reconsidered.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.241.1-241.1
• /
• 2011

Numerous possible applications for $ZrO_2$ nanotubes exist such as for catalyst support structures, for sensing or for applications as a solid state electrolyte. Especially, because of a large specific surface area, high efficiency for solid oxide fuel cell (SOFC) application at low temperature can be expected for nanotublar structures in even small size. A zirconium precursor, Tetrakis (ethylmethylamino) zirconium, TEMAZr and $H_2O$ oxidant were used to deposit$ZrO_2$ thin films on an anodized aluminum oxide (AAO) templates having sub-100nm cylindrical pores by atomic layer deposition (ALD) in the temperature range of 150~250$^{\circ}C$. The crystalline structures of as-prepared and post-annealed $ZrO_2$ nanotubes were characterized by x-ray diffraction and high-resolution transmission electron microscopy. The as-prepared samples at $150^{\circ}C$ and $200^{\circ}C$ were showed amorphous, whereas a mixed phase of tetragonal, monoclinic and amorphous polymorph was observed at $250^{\circ}C$. In the bulk, zirconia remains monoclinic phase up to $1,175^{\circ}C$, however, $ZrO_2$ nanotubes were showed tetragonal phase upon post thermal treatments merely at $400^{\circ}C$. This trend may be indicative of high-curvature surfaces of nanotubes and thereby the presence of intrinsic compressive strain. The amount of amorphous structures in the mixed phase as well as as-grown $ZrO_2$ nanotubes were also gradually decreased by subsequent heat treatment.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.179-188
• /
• 2014

This research reports the effects of shifting cultivation on soil environment collecting samples from 0-5 cm soil depth from five locations viz. at Burburichhara, Maichchari, Longadu, Sukurchhari and Muralipara in Rangamati district of Chittagong Hill Tracts (CHTs). Soil analyses showed that fungal and bacterial population, microbial respiration and active microbial biomass, maximum water holding capacity, conductivity and moisture contents were significantly (at least $p{\leq}0.05$) lower in shifting cultivated soil compared to adjacent mixed tree plantations at all the sites. On an average in soils of 5 different shifting cultivated lands fungal population was $1.33{\times}10^5$ CFU/g dry soil and bacterial population $1.80{\times}10^7$ CFU/g dry soil and in mixed plantations fungal population was $1.70{\times}10^5$ and bacterial population $2.51{\times}10^7$ CFU/g dry soil. Organic matter and exchangeable Ca and Mg contents were significantly (at least $p{\leq}0.05$) lower and bulk density significantly (at least $p{\leq}0.05$) higher in shifting cultivated land in most of the locations compared to adjacent mixed tree plantations. Ratios of microbial respiration and organic carbon as well as active microbial biomass and organic carbon were distinctly lower and pH higher at 3 locations in shifting cultivated soils compared to mixed plantations. Findings of various soil properties, therefore, suggest that shifting cultivation has deteriorating effects on soil environment.

• Journal of the korean society of oceanography
• /
• v.33 no.4
• /
• pp.185-195
• /
• 1998

Two piston cores (94PC-2 and 95PC-4) taken from the East Sea (Sea of Japan) are studied to evaluate the paleoceanographic changes and its interaction with climatic variation. The bulk geochemistry of the non-biogenic fractions of 54 sediment samples is determined using X-ray fluorescence. Four geochemical stratigraphic units at both core sediments are recognized based on the variations in major element concentration. These chemical stratigraphic units correspond well with the sedimentological and paleontological facies. Source materials are considered as basic and/or intermediate rocks judging from silica content. A distinctive boundary around 11 kyr may correspond to Younger Dryas event. The switch of most major elements at this level and the distinctive changes in concentration of typical terrigenous elements (TiO$_2$ and Al$_2$O$_3$) are the strong evidence for the difference in sources of terrigenous materials. The weathering indices exhibit high degree in Core 94PC-2 and low degree in Core 95PC-4. The changes in weathering degree can be distinguished by the lowest value occurred at 11 kyr in Core 94PC-2 and by a gradual decrease from top to bottom in Core 95PC-4. The profiles of potassium and sodium exhibit specific excursions between the Holocene and the late Pleistocene. This implies that sediments of the two cores originating from different sources with different weathering degrees. The distinct two-group distributions in K$_2$O/CaO vs. Na$_2$O/K$_2$O also support the difference in provenance of aluminosilicate materials at the boundary of 11 kyr. Thus, supply patterns of terrigenous materials are stable in Holocene and more complicated in the last glacial period.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Korean Journal of Veterinary Service
• /
• v.17 no.3
• /
• pp.208-226
• /
• 1994

From January to December 1993, 3,385 bulk milk samples were collected from 293 herds in Inchon area. Standard plate counts(SPC) and somatic cell counts(SCC) were performed by the method of milk collection, the situation of raising management and monthly. The results obtained are summarized as follows : 1, Annual average SPC and SCC were respectively 638,000 cfu /mm and 647,000 cells /mm. SPC showed an abrupt decrease from January-1,088,000 cfu /mm to December-279,000 cfu /mm, but SCC showed a slow change from January-1,017,000 cells /mm to December -673,000 cells /mm 2. Variation on milk quality(annual average SPC) was shown a wide difference between everyday collection-575,000 cfu /mm and every other day collection-1,243,000 cfu /mm ac-cording to frequency of milk collection from dairy farms. However, there was a little difference In SCC. 3. In the raising scale, average SPC were the lowest in 16~25mi1king cows, and average SCC were the lowest in above 25milking cows. 4. According to types of milking machine, average SPC and SCC of dairy farms that are equipped with pipeline system were respectively 361,000 cfu /mm and 591,000 cells /mm. Those of dairy farms with bucket system were 549,000 cfu /me and 559,000 cells /mm. 5. In the types of management, average SPC an SCC of dairy farms with hired herdsman were 288,000 cfu /mm and 559,000 cells /mm. Those of dairy farms with self-management were 526,000 cfu /mm and 568,000 cells /mm.

• Journal of Forest and Environmental Science
• /
• v.31 no.1
• /
• pp.14-23
• /
• 2015

In this study, we investigated the effects of three land uses on soil properties in two soil layers; surface soil (0~15 cm) and subsoil (15~30 cm). Soil samples were collected from planted forest, barren lands and cultivated lands from different areas in Chittagong Cox's Bazar and analyzed for some physical and chemical properties. Results showed that soil textural class varied from sandy clay loam in planted forest and barren land site to sandy loam in cultivated soils. Maximum water holding capacity was higher in forest followed by barren land and the lowest in cultivated lands. At both soil depths, soils of cultivated land showed the highest values of bulk density (1.42 to $1.50g\;cm^{-3}$), followed by barren lands (1.37 to $1.46g\;cm^{-3}$) and the least (1.32 to $1.45g\;cm^{-3}$) in forest soils. Total porosity decreased with depth ranging from 40.24% to 41.53% in subsoils and from 42.04 to 43.23% in surface soil of cultivated and of planted forest sites respectively. The result further revealed that organic carbon (OC) and total nitrogen (TN) contents were higher in the planted forest soil than in other two land uses. The soils of all land uses under study are acidic in nature and the lowest pH was found in both surface and subsoils of barren land. Cultivated soil contained the highest amount of available P, Ca, Mg and K in both surface soil and subsoils. In contrast, barren site had the lowest contents of available P, Ca, Mg and K in both layers. The soil organic carbon (SOC) and total N storage were higher in planted forest than in barren and cultivated land uses.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.4
• /
• pp.410-422
• /
• 1989

Soybean protein isolates were acylated with succinic anhydride and partially hydrolyzed with trypsin. Chemical modification decreased protein contents of samples and, in amino acid composition, tyrosine was increased comparatively. And lysine was increased remarkably by partial proteolysis. Succinylation and trypsin treatment increased the aqueous solubility and shifted the isoelectric potint that showed high pH-dependence of protein solubility. Protein solubility was influenced by salt concentration such as $NaCl,\;CaCl_2,\;NaNO_3$ and $NaH_2PO_4$. Chemical modification increased the absorption of oil and water, emulsification properties and foam capacity, but decreased foam stability, ultraviolet absorbance and bulk density. Protein-protein Interaction between soybean protein isolates and beef protein increased the emulsifying activity, emulsifying activity index and foaming properties, but it didn't have any influence on emulsion stability.