• 한국정보전자통신기술학회논문지
• /
• 제4권4호
• /
• pp.236-241
• /
• 2011

높은 기공성을 갖춘 망상골과 고체의 비율이 높은 피질골의 기계적 성질은 초음파 파동 전파 측정법으로 알 수 있다. 초음파의 속도(SOS)는 bulk wave 방정식과 bar wave 방정식을 통해 산출할 수 있다. Bulk wave는 Biot의 이론에서 빠른 파동과 매우 유사함을 이용해, 본 연구에서 뼈의 이방성을 담은 행렬에 의해 bulk wave 속도가 변하는 여부를 측정하였다. 음파의 속도는 뼈가 횡방적인(transversely isotropy) 특성을 갖을 때보다 등방적인 특성을 갖을 때 0.69% 빠르다. 또한 bar wave 방정식을 사용하여 피질골에 대한 속도를 측정하였다. 전의 논문에 의하면 bar wave 속도는 탄성 계수 텐서 혹은 영의 계수의 함수이고 이와 같은 방법으로 bar wave 속도에 의해 등방성과 이방성을 측정하였다.

• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.53-59
• /
• 2016

초음파 비선형 진단을 이용한 기법의 경우 재료의 단순 결함 검출뿐만 아니라 부식, 소성변형과 같은 미세손상을 평가할 때 주로 이용된다. 1차 조화파(primary wave)와 2차 조화파(second harmonic wave)의 진폭의 비를 이용하여 비선형성을 나타내며, 이러한 비선형성의 비교 결과를 진단에 사용한다. 실험 특성상 비선형성은 재료의 비선형성뿐만 아니라 장비의 비선형성 또한 포함하게 된다. 장비 비선형성은 사용자가 측정하고자 하는 값이 아니므로 오차로 작용하여 분석을 방해한다. 본 연구에서는 오차로 작용하는 장비의 비선형성을 감소시켜 보다 정확한 진단을 위해 체적파 혼합기법을 사용하였다. 체적파 혼합기법의 가장 큰 특징은 기존의 초음파 비선형 진단보다 장비의 비선형성을 줄일 수 있다는 점이다. 본 연구에서는 체적파 혼합기법을 이론 및 실험적으로 검증하였으며, 기존의 초음파 비선형 진단기법의 결과와 체적파 혼합기법의 결과를 비교하여 장단점 및 적용 가능성 분석에 초점을 두었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.499-508
• /
• 2017

This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance in calm water and added resistance in regular head wave of ${\lambda}/L=0.5$. WAVIS version 1.3 is used to obtain wave-making resistance. The modified Fujii and Takahashi's formula is applied to obtain the added resistance in short wave. The PSO algorithm is employed for the optimization technique. The resistance and motion characteristics in calm water and regular and irregular head waves of the three hull forms are compared. It has been shown that the optimal brings 13.2% reduction in the wave-making resistance and 13.8% reduction in the added resistance at ${\lambda}/L=0.5$; and the mean added resistance reduces by 9.5% at sea state 5.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.297-302
• /
• 2015

Terahertz (THz) wave generation from bulk and periodically poled $LiTaO_3$ (PPLT) with a Cherenkov phase matching scheme is numerically investigated. It is shown that by using the crystal birefringence of bulk $LiTaO_3$ and a grating vector of PPLT, THz waves can be efficiently generated by difference frequency generation (DFG) with a Cherenkov phase matching scheme. The frequency tuning characteristics of the THz wave via varying wavelength of difference frequency waves, phase matching angle, poling period of PPLT and working temperature are theoretically analyzed. The parametric gain coefficient in the low-loss limit and the absorption coefficient of the THz wave during the DFG process in the vicinity of polariton resonances are numerically analyzed. A THz wave can be efficiently generated by utilizing the giant second order nonlinearities of $LiTaO_3$ in the vicinity of polariton resonances.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1221-1229
• /
• 2022

In this work, the guided wave de-bonding area-detecting technique was studied for application to containment liner plates in nuclear power plant areas. To apply this technique, an appropriate Lamb wave mode, symmetric and longitudinal dominance, was verified by the frequency shifting technique. The S0 2.7 MHz mm Lamb wave mode was chosen to realize quantitative experimental results and their visualization. Results of the bulk wave, longitudinal wave mode, and comparison experiments indicate that the wave mode was able to distinguish between the de-bonded and bonded areas. Similar to the bulk wave cases, the bonded region could be distinguished from the de-bonded region using the Lamb wave approach. The Lamb wave technique results showed significant correlation to the de-bonding area. As the de-bonding area increased, the Lamb wave energy attenuation effect decreased, which was a prominent factor in the realization of quantitative tomographic visualization. The feasibility of tomographic visualization was studied via the application of Lamb waves. The reconstruction algorithm for the probabilistic inspection of damage (RAPID) technique was applied to the containment liner plate to verify and visualize the de-bonding condition. The results obtained using the tomography image indicated that the Lamb wave-based RAPID algorithm was capable of delineating debonding areas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.156-159
• /
• 2002

Film Bulk Acoustic wave Resonator (FBAR) using thin piezoelectric films can be fabricated as monolithic integrated devices with compatibility to semiconductor process, leading to small size, low cost and high Q RF circuit elements with wide applications in communications area. This paper presents a MMIC compatible Suspended FBAR using surface micromachining. It is possible to make Si$_3$N$_4$/SiO$_2$/Si$_3$N$_4$membrane by using surface micromachining and its good effect is to remove the substrate silicon loss. FBAR was made on 2$\mu\textrm{m}$ multi-layered membrane using CVD process. According to our result, Fabricated film bulk acoustic wave resonator has two adventages. First, in the respect of device Process, our Process of the resonator using surface micromachining is very simple better than that of resonator using bull micromachining. Second, because of using the multiple layer, thermal expansion coefficient is compensated, so, the stress of thin film is reduced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.673-676
• /
• 2003

This paper describes the modeling and experimental results for Bulk Acoustic Wave(BAW) Resonator using PolyVinyliDene Fluoride(PVDF). We measured the input reflection coefficient ($S_{11}$) of resonators using vector network analyzer and experimental results were measured fundamental resonance at 2.3 GHz with a return loss of -29 dB. Because of fabricated resonator without etching process, we can confirm a possibility of resonator application as using a PVDF.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.261-268
• /
• 2018

Stimulated polariton scattering (SPS) from the $A_1$ transverse optical (TO) modes of $BaTiO_3$ bulk crystal generating a terahertz (THz) wave with the noncollinear phase-matching (NPM) condition is theoretically investigated. To our best knowledge, this is the first report on THz wave generation from $BaTiO_3$ bulk crystal via SPS. Phase-matching (PM) characteristics in the NPM configuration are analyzed. Effective parametric gain lengths for the Stokes and THz waves in the NPM configuration are calculated. The effective parametric gain coefficient and absorption coefficient of the THz wave in $BaTiO_3$ are theoretically simulated. The THz phonon flux densities generated via SPS in $BaTiO_3$ are theoretically calculated by solving the coupled wave equations under the NPM condition. The PM characteristics and THz-wave parametric gain characteristics in $BaTiO_3$ are compared to those in $MgO:LiNbO_3$. The results of the analysis indicate that $BaTiO_3$ is an attractive optical crystal for efficient THz wave generation via SPS.

• The Journal of the Acoustical Society of Korea
• /
• 제25권2E호
• /
• pp.49-55
• /
• 2006

Compressional wave velocity (Vp), shear wave velocity (Vs), elastic and physical properties, and electrical resistivity for two core sediments obtained from Southeastern Yellow Sea Mud (SEYSM) were measured and computed. The sediments consist of homogeneous mud (mostly silt and clay) with shells and shell fragments. As a result, the mean grain size is uniform ($7.5-8.5{\Phi}$ throughout the core sediments. However, physical properties such as wet bulk density and porosity show slightly increasing and decreasing patterns with depth, compared to the mean grain size. The compressional (about 1475 m/s in average) and shear wave (about 60 m/s in average) velocities with depth accurately reflect the pattern of wet bulk density and porosity. Electrical resistivity is more closely correlated with compressional wave velocity than physical properties. The computed Vp/Vs and Poisson's ratios are relatively higher (more than 10) and lower (approximately 0.002) than Hamilton's (1979) data, respectively, suggesting the typical characteristics of soft and fully water-saturated marine sediments. Thus, the Vp/Vs ratio in soft and unconsolidated sediments is not likely sufficient to examine lithology and sediment properties. Relationships between the elastic constant and physical properties are correlated well. The elastic constants (Poisson's ratio, bulk modulus, shear modulus) given in this paper can be used to characterize soft marine sediments saturated with seawater.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.425-428
• /
• 2017

본 논문에서는 진동 에너지를 이용하여 에너지를 수확하는 전파 정류 하베스팅 회로를 설계하였다. 설계된 회로는 저전압에서도 전력효율이 우수하도록 Beta-Multiplier를 이용하여 Body-Bias technique을 Negative Voltage Converter에 적용하였으며, Comparator를 Bulk-Driven type으로 설계하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정으로 설계하였으며, 설계된 회로의 칩 면적은 $931{\mu}m{\times}785{\mu}m$이다.