• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.476-482
• /
• 2001

This experiment was conducted to evaluate the effect of slow-release fertilizer application on quality elevation of onion (Allium cepa L.) in southwestern sea. The slow-release fertilizers used were NIAST (National Institute of Agricultural Science and Technology) I, II, CDU (Crotonylidene Diurea), UF (Urea-Formaldehydes), and IBDU (Isobutylidene Diurea) 30, 50. Growth of the onion plant treated with slow-release fertilizer showed better than the control. However, a rate of infected plant to downy mildew was low as compared with control. Chlorophyll and total nitrogen contents were high in control, whereas firmness, soluble solid content, number and thickness of scaly leaves were high in slow-release fertilizer plot. In early maturing onion, total marketable bulb yield was higher in slow-release fertilizer plot than all other fertilizer treatments. Total marketable bulb yield in late maturing onion treated with slow-release fertilizer was slightly decreased. Decaying loss and the rate of sprouting during storage period decreased in slow-release fertilizer application. In summary, application of slow-release fertilizer increased marketable yield, storability after harvest and also reduced labor needs for top dressing.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.367-381
• /
• 2020

This paper presents the seal material mixing ratio of tunnel umbrella arch reinforcement method. Currently, there is no clear standard for the proper gelation time and curing time of the Seal material in Korea, and the quality control is also difficult because it cannot be verified. In response, the ratio of the mixture of the seal material was composed of four types of indoor experiments, and the amount of gelation time and bleed was checked. In addition, a non-cart penetration test confirmed the curing time and compared the ratio of each combination. Further experiments on W/C 120% identified the effect of mixing speed and time on the seal material. A total of three field experiments were conducted based on indoor experiments, and the size and strength of bulb formation were compared by checking the curing time of the specimen and main injection. Comparisons show that the lower W/C, the stronger the strength, the larger the size of the bulb, and the faster the hardening time appears. Based on the results of the gelation time and curing time, it was deemed that the mixing ratio of W/C 120% is most appropriate when applied to the actual site.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.750-756
• /
• 2010

This study was performed to investigate the role of phytohormones in the bulbing of garlic in order to assess the yield and quality. The effect on endogenous plant hormones such as gibberellin (GA) content was also examined during growth stage i.e. clove differentiation to bulbing in garlic. More than 18 gibberellins in garlic were identified with extensive gas chromatograph-mass spectrometry-selected ion monitoring (GC-MS-SIM) quantitative analysis. The results showed that GAs were biosynthesized by both non C-13 hydroxylation pathway (NCH) and early C-13 hydroxylation pathway (ECH) in garlic plant. It was also revealed that NCH pathway leading to synthesis of bioactive $GA_4$ was the more prominent GA biosynthesis pathway than ECH pathway in which bioactive $GA_1$ was synthesized. Total GAs level was gradually increased from clove differentiation to bulbing and later decreased, which portrays the active role of GA in differentiation. The biosynthesis ratio of bioactive $GA_4$ and $GA_1$ concentration was similar to that of total GAs content, which was closely related with bulb development in garlic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.281-293
• /
• 2021

Patients who went through maxillectomy can have severely impaired swallowing, mastication, and pronunciation functions because of palatal defects. Leakage occurs through the nasal cavity while eating, chewing becomes difficult due to the loss of teeth and alveolar ridges, and oral and nasal passages are not separated, leading to hyper-nasal sound, and significantly reducing the quality of life. To prosthetically reconstruct the defect, the weight of the obturator should be reduced as much as possible to minimize dropout because of gravity, and the bulb of the obturator should be properly extended into the defect to get additional retention and stability. In this case of a partially edentulous patient who underwent additional maxillary resection because of tumor recurrence, a metal framework was designed by applying the basic design principles of removable partial dentures. An obturator with improved retention, stability, and support was fabricated through functional impressions. The patient was satisfied with the improved facial expression, mastication, swallowing, and pronunciation, and showed stable occlusion and oral hygiene management during the follow-up period.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.21-29
• /
• 1999

This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.

• Journal of Korean Elementary Science Education
• /
• v.36 no.1
• /
• pp.1-15
• /
• 2017

The purpose of this study is to analyze the problems of land and sea breeze model experiment that has presented in $5^{th}$ grade curriculum in chapter "Weather and our lives" and makes better model simulation so that learners can have better and more effective way to study it. To survey the opinions from dedicated teachers about land and sea breeze model experiment, we produced the survey through interview with science exclusive teacher from M elementary school. An elementary science education expert, 3 men of science EdD modified and complemented survey and started Delphi survey to 12 science teachers who have career teaching more than 3 years. The problems found in this survey were 'one heat bulb, short heating time, small temperature difference of water and sand, lack of class time, empty space between sand and water, back of transparent boxes, little amount of scent and the location of the it' etc. But the most of all, it is hard to see the successful result of the experiment. Based on these kinds of investigations, and lots of trial and error, redesigned the new model experiment that has the most similarity to the real one and high probability of success. According to this, it was able to see the smoke forms horizontal movement along the sand and the smoke goes in one circulation cycle. through this experiment, we made a conclusion that although those scientific experiments in textbook were developed through lots of considerations of expert, to consider the aspect of consumer, it needs to reach the educational agreement about simulation experiment so that It can lead to successful experiment and high quality education.

• Journal of the Korean housing association
• /
• v.17 no.5
• /
• pp.9-16
• /
• 2006

The researches on the environmental friendly buildings have carried out on the materials, environmental property, technical elements and etc., and various buildings with these green materials have built and under construction nowadays and became a new trend of the green building. And recently, new building technique which builds the wall with the soil and wood and very easy to construct (called M Earthen House) was introduced as the green building and rapidly propagated. But the research on the indoor climatic characteristics, the ability to control the environmental comfort and the influence to the human beings of these buildings are not sufficiently identified yet. In this paper, the indoor environmental characteristics and the temperature controlling ability of these buildings in summer season were measured and analysed by the Portable Indoor Air Quality Monitor(BABUC/A, LSI) measuring equipments, ana the subjective test on the thermal environment of the subjects were carried out to evaluate the thermal comfort. The results can be summarized as follows; 1) Compared to the outdoor dry bulb temp.($15.4{\sim}28.7^{\circ}C$), the indoor temp. was $19.5{\sim}26.8^{\circ}C$. It showed the temperature controlling ability of the M earthen house was outstanding. And the indoor relative humidity, compared to the outdoor($45.4{\sim}100%$), was $58.1{\sim}76.4%$, it showed the humidity controlling ability of the M earthen house was also outstanding. 2) The thermal environment was evaluated as 'comfort'(neutral-slightly warm) and the humidity was also evaluated as 'comfort'(neutral-slightly humid). So, the results of the physical and subjective evaluation on the indoor thermal comfort in summer season were 'neutral' and 'comfort' coincidently, it was confirmed that the controlling ability of the indoor temperature and humidity of the M earthen house was very excellent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.5
• /
• pp.576-582
• /
• 2016

To cope with international regulations, such as Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and so forth, and to enforce limitations on $CO_2$ emissions, green-ship technology to lower fuel consumption has been actively researched, and the development of an energy-saving device (ESD) is being pursued. In order to design an ESD for small and medium-sized domestic vessels, an analysis on flow characteristics has been performed in the present study. Through a model test and numerical analyses, the characteristics of flow around the stern bilge and bulb have been compared to improve wake quality and resistance performance. As a result of these comparisons and analyses, a vertical plate has been adopted,, as a new ESD. Design criteria for the proposed ESD are also suggested. By applying this new ESD, it is expected that the total resistance and average nominal wake can be reduced by 3.04 % and 18.8 %, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.9
• /
• pp.863-872
• /
• 2005

It is important to control indoor environment for influence on health and comfort of occupants in large-sized discount stores. On the other hand large-sized discount stores have a large number of visitors, vestibules, open spaces, high energy consumption and increasing of outside air intake. This study aims to offer the design data of building services system that can save energy and control environment through field measurement selecting two large-sized discount stores. Indoor environment factors such as temperature, relative humidity, air velocity and concentrations of $CO_2$, CO gas and TSP were measured and evaluated. In each case of $CO_2$, and CO gas, its maximum values were 2,800 ppm and 20 ppm. So proper strategy for the indoor air quality is indispensable in this type of building. Dry bulb temperature varies from $18^{\circ}C$ to $28^{\circ}C$ according to a measuring point and time. From this results, it is inferred these buildings had excessive equipment capacity. In terms of economical and environmental points, these data will be utilized to the design of HVAC system of retail facilities.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.2
• /
• pp.115-120
• /
• 1990

A series of experiments were carried out for two successive years to investigate the productivity of forage turnip in mid-northern area of Korea. Fresh matter and dry matter yields of 6 foreign cultivars (Purple Top Strap Leaved, Purple Top White Globed, Seven Top, Shogoin, White Egg and Amber Globe) seeded either in early spring or in autumn after harvesting forage corn were evaluated with different seeding date and harvesting date as well as with different level of fertilization. The results obtained are summarized as follows: 1. The earlier the seeding date in spring (Mar. 29, Apr. 12, Apr. 16) was, the higher was the yield of fresh matter and dry matter as the plant growth ceased after mid June, when the temperature began to rise. 2. In spite of its high DM yield, the Japanese cultivar, Shogoin, showed poor forage quality for summer feeding due to its earlier bolting in harvesting season. 3. Of the 6 cultivars Purple Top White Globed showed highest DM yield (800 kg/ 10a) in mid area including SEOUL irrespective of planting season. 4. Although the turnips showed mostly positive yield responses to fertization, the differences were not great especially above the level of$N-P_2O_5-K_2O$: 5-3-4 kg/lOa. 5. IN TAEGWALLYONG, a northern area of Korea, the average fresh matter yield of the six cultivars tested amounted to 3,500 kg/lOa when drilled on June 30 and harvested on Aug. 30, although bulb formation during the summer was relatively poor. 6. Concluded, forage turnip is regarded to be a suitable catch-crop which has the potential to maintain and increase the total forage production in mid-northern area of Korea. The intercropping is recommendable especially for autumn planting well past the time forage corn has been harvested.