Journal of the Korean Society of Marine Environment & Safety (해양환경안전학회지)

The Korean Society of Marine Environment and safety (해양환경안전학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Flow Characteristics due to Dimension Variations of the Vertical Plate for Controlling the Ship Stern Flow

선미유동 제어용 수직판 제원 변화에 따른 유동특성 연구

  • 김도정 (한국조선해양기자재연구원) ;
  • 오우준 (한국조선해양기자재연구원) ;
  • 박제웅 (조선대학교 선박해양공학과) ;
  • 정세민 (조선대학교 선박해양공학과)
  • Received : 2016.06.27
  • Accepted : 2016.08.29
  • Published : 2016.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

To cope with international regulations, such as Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and so forth, and to enforce limitations on $CO_2$ emissions, green-ship technology to lower fuel consumption has been actively researched, and the development of an energy-saving device (ESD) is being pursued. In order to design an ESD for small and medium-sized domestic vessels, an analysis on flow characteristics has been performed in the present study. Through a model test and numerical analyses, the characteristics of flow around the stern bilge and bulb have been compared to improve wake quality and resistance performance. As a result of these comparisons and analyses, a vertical plate has been adopted,, as a new ESD. Design criteria for the proposed ESD are also suggested. By applying this new ESD, it is expected that the total resistance and average nominal wake can be reduced by 3.04 % and 18.8 %, respectively.

이산화탄소 배출량 제한을 의무화하는 EEDI, SEEMP 등의 국제협약에 대응하기 위하여 선박의 에너지 절감장치(ESD, Energy Saving Device) 관련 국내기술 대응이 절실하다. 본 연구는 국내 중소형 조선소의 주력선종 효율 향상의 ESD를 설계하기 위하여 유동특성 분석에 대한 연구이다. 프로펠러 상단으로 유입되는 유동을 개선하기 위하여 bare hull의 선미벌브 및 빌지 주변의 유동특성을 수치해석과 모형시험을 통하여 정성적으로 분석하였으며, 선저압력 지점의 개선 및 프로펠러 상단 유입의 선미 빌지 유동 제어를 위하여 선미벌브와 빌지 사이에 수직평판을 부착하였다. 선미 선체표면 압력회복으로 전저항이 약 3.04 % 감소하였으며, 프로펠러 상단 유동 제어를 통해 평균 공칭반류가 약 18.8 % 감소하였다.

Keywords

References

  1. Bank, J.(2010), Free surface CFD prediction of components of Ship Resistance for KCS, 13th Numerical Towing Tank Symposium, p. 6.
  2. Choi, J. E., J. S. Kim, S. B. Lee and H. G. Lee(2009), Computational Prediction of Speed Performance for a Ship with Vortex Generators, The Journal of the Society of Naval Architects of Korea, Vol. 46, No. 2, pp. 136-147. https://doi.org/10.3744/SNAK.2009.46.2.136
  3. Kim, J. H., J. E. Choi, B. J. Choi, S. H. Chung and H. W. Seo(2015), Development of energy-saving devices for a full slow-speed ship through improving propulsion performance, Int. J. Nav. Archit. Ocean Eng., Vol. 7, No. 2, pp. 390-398. https://doi.org/10.1515/ijnaoe-2015-0027
  4. Korkut, E.(2006), A case study for the effect of a flow improvement device on ship powering characteristics, The Journal of the Ocean Engineering 33, pp. 205-218. https://doi.org/10.1016/j.oceaneng.2005.03.010
  5. Lee, K. J. and J. S. An(2012), Development of Complex Energy Saving Device, The Journal of the Korean Society of Ocean Engineerings, Vol. 26, No. 3, pp. 1-5.
  6. Lee, Y. S. and Y. B. Choi(2009), Study on the Effect of Wake Control Devices on Ship Performance Components, The Journal of the Society of Naval Architects of Korea, Vol. 46, No. 5, pp. 453-459. https://doi.org/10.3744/SNAK.2009.46.5.453
  7. Narita, H., H. Yagi, H. D. Johnson and L. R. Breves(1981), Development and Full-Scale Experiences of a Novel Integrated Duct Propeller, The Journal of the SNAME Transactions, Vol. 89, pp. 319-346.
  8. Park, G. Y. and K. H. Cho(2014), A study on the comparison of effects and application of marine fuel reduction methods, The Journal of the Korean Society of Marine Engineering, Vol. 38, No. 9, pp. 1057-1063. https://doi.org/10.5916/jkosme.2014.38.9.1057
  9. Park, D. W., H. J. Choi, H. S. Yoon and H. H. Chun(2009), A Numerical Study for Improvement of the Speed-performance of a Ship with Flow Control Flat Plate, The Journal of the Society of Naval Architects of Korea, Vol. 46, No. 3, pp. 268-278. https://doi.org/10.3744/SNAK.2009.46.3.268
  10. Wie, D. E. and D. J. Kim(2012), The Design Optimization of a Flow Control Fin Using CFD, The Journal of the Society of Naval Architects of Korea, Vol. 49, No. 2, pp. 174-181. https://doi.org/10.3744/SNAK.2012.49.2.174
  11. Yang, H., B. N. Kim, J. H. Yoo and W. J. Kim(2010), Wake Comparison between Model and Full Scale Ships Using CFD, The Journal of the Society of Naval Architects of Korea, Vol. 47, No. 2, pp. 150-162. https://doi.org/10.3744/SNAK.2010.47.2.150