• Asia pacific journal of information systems
• /
• 제20권4호
• /
• pp.101-123
• /
• 2010

Recently, firms are operating a number of teams to accomplish organizational performance. Especially, ad hoc teams like proposal preparation team are quite different from permanent teams like R&D team in the sense of how the team forms network structure and deals with organizational learning culture and knowledge management participation efforts. Moreover, depending on the team characteristics, individual creativity will differ from each other, which will lead to organizational performance eventually. Previous studies in the field of creativity are lacking in this issue. So main objectives of this study are organized as follows. First, the issue of how to improve individual creativity and organizational performance will be analyzed empirically. This issue will be performed depending on team characteristics such as ad hoc team and permanent team. Antecedents adopted for this research objective are cultural and knowledge factors such as organizational learning culture, and knowledge management participation. Second, the network structure such as degree centrality, and structural hole is used to analyze its influence on individual creativity and organizational performance. SI (System Integration) companies are facing severely tough requirements from clients to submit very creative proposals. Also, R&D teams are widely accepted as relatively creative teams because their responsibilities are focused on suggesting innovative techniques to make their companies remain competitive in the market. SI teams are usually ad hoc, while R&D teams are permanent on an average. By taking advantage of these characteristics of the two kinds of teams, we will prove the validity of the proposed research questions. To obtain the survey data, we accessed 7 SI teams (74 members), and 6 R&D teams (63 members), collecting 137 valid questionnaires. PLS technique was applied to analyze the survey data. Results are as follows. First, in case of SI teams, organizational learning culture affects individual creativity significantly. Meanwhile, knowledge management participation has a significant influence on Individual creativity for the permanent teams. Second, degree centrality Influences individual creativity significantly in case of SI teams. This is comparable with the fact that structural hole has a significant impact on individual creativity for the R&D teams. Practical implications can be summarized as follows: First, network structure of ad hoc team should be designed differently from one of permanent team. Ad hoc team is supposed to show a high creativity in a rather short period, implying that network density among team members should be improved, and those members with high degree centrality should be encouraged to show their Individual creativity and take a leading role by allowing them to get heavily engaged in knowledge sharing and diffusion. In contrast, permanent team should be designed to take advantage of structural hole instead of focusing on network density. Since structural hole can be utilized very effectively in the permanent team, strong arbitrators' merits in the permanent team will increase and therefore helps increase both network efficiency and effectiveness too. In this way, individual creativity in the permanent team is likely to lead to organizational creativity in a seamless way. Second, way of Increasing individual creativity should be sought from the perspective of organizational culture and knowledge management. Organization is supposed to provide a cultural atmosphere in which Innovative idea suggestions and active discussion among team members are encouraged. In this way, trust builds up among team members, facilitating the formation of organizational learning culture. Third, in the ad hoc team, organizational looming culture should be built such a way that individual creativity can grow up fast in a rather short period. Since time is tight, reasonable compensation policy, leader's Initiatives, and learning culture formation should be done In a short period so that mutual trust is built among members quickly, and necessary knowledge and information can be learnt rapidly. Fourth, in the permanent team, it should be kept in mind that the degree of participation in knowledge management determines level of Individual creativity. Therefore, the team ought to facilitate knowledge circulation process such as knowledge creation, storage, sharing, utilization, and learning among team members, which will lead to team performance. In this way, firms must control knowledge networks in permanent team and ad hoc team in a way mentioned above so that individual creativity as well as team performance can be maximized.

• Journal of the Korean Geographical Society
• /
• 제40권
• /
• pp.1-13
• /
• 1989

The brightness temperature from NOAA AVHRR CH 4 images was examined for the metropolitan Seoul area, the capital city of Korea, to detect the characteristics of the urban heat island for this study. Surface data from 21 meteorological stations were compared with the brightness temperatures Through computer enhancement techniques, more than 20 heat islands could be recognized in South Korea, with 1 km spatii resolution at a scale of 1: 200, 00O(Fig. 3, 4 and 6). The result of the analysis of AVHRR CH 4 images over the metropolitan Seoul area can be summerized as follows (1) The pattern of brightness temperature distribution in the metropolitan Seoul area shows a relatively strong temperature contrast between urban and rural areas. There is some indication of the warm brightness temperature zone characterrizing built-up area including CBD, densely populated residential district and industrial zone. The cool brightness temperature is asociaed with the major hills such as Bukhan-san, Nam-san and Kwanak-san or with the major water bodies such as Han-gang, and reservoirs. Although the influence of the river and reservoirs is obvious in the brightness temperauture, that of small-scaled land use features such as parks in the cities is not features such as parks in the cities is not apperent. (2) One can find a linerar relationshop between the brightenss temperature and air temperature for 10 major cities, where the difference between two variables is larger in big cities. Though the coefficient value is 0.82, one can estimate that factors of the heat islands can not be explained only by the size of the cities. The magnitude of the horizontal brightness temperature differences between urban and rural area is found to be greater than that of horizontal air temperature difference in Korea. (3) Also one can find the high heat island intensity in some smaller cities such as Changwon(won(Tu-r=9.0$^{\circ}$C) and Po-hang(Tu-r==7.1$^{\circ}$~)T. he industrial location quotient of Chang-won is the second in the country and Po-hang the third. (4) A comparision of the enhanced thermal infrared imageries in 1986 and 1989, with the map at a scale of 1:200, 000 for the meotropolitan Seoul area showes the extent of possible urbanization changes. In the last three years, the heat islands have been extended in area. zone characterrizing built-up area including (5) Although the overall data base is small, the data in Fig. 3 suggest that brightness tempeautre could ge utilized for the study on the heat island characteristics. Satellite observations are required to study and monitor the impact of urban heat island on the climate and environment on global scale. This type of remote sensing provides a meams of monitoring the growth of urban and suburban aeas and its impact on the environment.

• The Journal of Korean Philosophical History
• /
• 제57호
• /
• pp.57-90
• /
• 2018

In this discussion, as a way to verify the existence of the system to regulate Zhou dynasty's $z{\bar{o}}ng-mi{\grave{a}}o$(宗廟) numbers, the discussion was focused on '$mi{\grave{a}}o$ (廟)' and '$g{\bar{o}}ng$(宮)' in the records of "$Ch{\bar{u}}n-qi{\bar{u}}$(春秋)". As for the parts where the contents of scripture sentences were not specific, the context of the case was investigated through the writings in "$Zu{\breve{o}}-zhu{\grave{a}}n$(左傳)" and other materials. In the cases of the usage of the letter, '$mi{\grave{a}}o$(廟 : a ruler's house, a nation's royal court)', in the scripture sentences in "$Ch{\bar{u}}n-qi{\bar{u}}$(春秋)", the followings need to be noticed. In $t{\grave{a}}i-mi{\grave{a}}o$(太廟) of State $L{\check{u}}$(魯), nationwide events and a ruler's political ancestral rite, $d{\grave{i}}$(?) ritual, were performed, and fancy tools for ancestral rites used in those rituals were equipped. As for the $z{\bar{o}}ng-mi{\grave{a}}o$(宗廟) of a ruler of those times, a ritual of royal court, $ch{\acute{a}}o$(朝) rite, was performed. The usage case of the letter, '$g{\bar{o}}ng$(宮 : house)', is as the following. In $g{\bar{o}}ng$(宮) where a ruler's personal family lived was a family ancestral rite for them carried out. The record about the ornate decorating for the $hu{\acute{a}}n-g{\bar{o}}ng$ house(桓宮), which can be said to have been the political base of $s{\bar{a}}n-hu{\acute{a}}n-sh{\grave{i}}$(三桓氏), three politically noble families of State $L{\check{u}}$(魯), is outstanding. The $x{\bar{i}}-g{\bar{o}}ng$ house(西宮) during $X{\bar{i}}-g{\bar{o}}ng$(魯 僖公)'s reign and a $x{\bar{i}}n-g{\bar{o}}ng$ house(新宮 : a newly built house) destroyed by fire at the third year of $Ch{\acute{e}}ng-g{\bar{o}}ng$(魯 成公), are assumed to have been a ruler's another house, such as the $ch{\check{u}}-g{\bar{o}}ng$ house(楚宮) in which $Xi{\bar{a}}ng-g{\bar{o}}ng$(魯 襄公) used to enjoy staying, which is different from the viewpoint that it might be a $m{\acute{i}}-g{\bar{o}}ng$ shrine(?宮 : a house constructed as a shrine for the deceased father or the deceased grand father) that had been formed since Han dynasty. It has been discussed that, regarding the records that the '$w{\check{u}}-g{\bar{o}}ng$ house(武宮) was built' and that the '$y{\acute{a}}ng-g{\bar{o}}ng$ house(煬宮) was built', certain buildings were established with the symbols of '$w{\check{u}}$(武 : martial arts and force of arms)' and '$y{\acute{a}}ng$(煬 : to burn and get rid of everything)', and the events that a lord stood as its lord continued. Therefore, its main goal was not the performance of a dutiful ancestral rite by a ruler of those times for deceased rulers, for instance, $W{\check{u}}-g{\bar{o}}ng$(魯 武公) or $Y{\acute{a}}ng-g{\bar{o}}ng$(魯 煬公), but display of certain political symbolism through the ritual. This symbolism is most obvious with the $hu{\acute{a}}n-g{\bar{o}}ng$ house(桓宮) and the $x{\bar{i}}-g{\bar{o}}ng$ house(僖宮). As a consequence, all $mi{\grave{a}}os$(廟) and $g{\bar{o}}ngs$(宮) in scripture sentences had the functions of a shrine in some part, but it has been verified that they were not the buildings set up as a shrine to follow '$z{\bar{o}}ng-mi{\grave{a}}o$(宗廟)'s number regulation system' of '$ti{\bar{a}}nz{\check{i}}-7-mi{\grave{a}}o$(天子七廟 : an emperor owns seven $mi{\grave{a}}os$(廟))' or '$zh{\bar{u}}h{\acute{o}}u-5-mi{\grave{a}}o$(諸侯五廟 : a lord owns five $mi{\grave{a}}os$(廟))'.

• Korean Journal of Environmental Agriculture
• /
• 제19권3호
• /
• pp.201-205
• /
• 2000

Eleven runoff $plots(3{\times}15\;m)$ were built on a sloping field of a high plateau in Kangwon Province, Korea. The plots were treated with different tillage, residue covers and fertilizers, corn and potato were cultivated, and sediment discharge was measured from the plots for 3 years. Agricultural management practices were monitored around the plots to develop adequate best management practices. The least sediment occurred from the plots with no-till and 100% residue cover $(corn,\;0.1{\sim}2.2\;t/ha/year)$ and with contour tillage and vinyl sheet cover plots $(potato,\;0.1{\sim}0.2\;t/ha/year)$. The largest sediment was measured from the plots with up-and-down till and no cover ($11{\sim}33$ and $16{\sim}31\;t/ha/year$ from corn and potato plots, respectively). The type of organic and commercial fertilizers seemed not to affect sediment discharge. Sediment discharge from contour plots were largely dependent on the collapse of ridges due to the flush of water stored in furrows. The sediment discharge from contour corn and potato plots with no residue cover was $10{\sim}27$ and $16{\sim}24\;t/ha/year$, respectively. No-till with residue cover, vinyl cover for tuber crops, construction of furrow dam, frost heave research, furrow and ridge tillage with furrow dam after tuber crop harvest, limited stalk harvest of row crops, use of winter cover crops, and other common best management practices were recommended to minimize the sediment discharge from a high plateau sloping land culture.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}

• Journal of the Korean Institute of Landscape Architecture
• /
• 제37권6호
• /
• pp.39-47
• /
• 2010

The coastal area is the place where two conflicting values provide opportunities for recreation, tourism and conservation of the natural environment. Most of these coastal areas have been disregarded in terms of tourism because of the high value placed on natural resources. Management strategy has usually been first on the priority list of natural. resources. However, due to the significant number of visitors, the Important-Satisfaction Analysis(ISA) was applied as a mean of complement since the 1970s. This study analyzed the difference between visitor satisfaction and the importance of the main management strategy targeting visitors to Sun-cheon Bay Ecological Park on weekdays and weekends. Results show that Sun-cheon Bay Ecological Park and the city government have paid a lot of attention and invested a lot of money, but efficiency of publicity didn't come up to their afford. Therefore, we should prepare information facilities, public education facilities and human power. Also needed are visitors' temporal-spacial control to set specific programs and a guide for information education control. It means visitors' company forms change depends on weekday and weekend. In addition, a breeding space for birds should be built for observation, education and exhibition to help meet visitor expectations. Visitors' positive satisfaction might be provided in establishing strategy as a very important measure in limited area. In conclusion, this study might be provided as preliminary data when the management strategy and related guidelines are established through the management priority of coastal regions where importance and satisfaction conflict.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제36권4호
• /
• pp.627-635
• /
• 2016

Recently, several construction projects have been built to create residential area, industrial complex and agricultural land on reclaimed on- and offshore regions. Estimating the quantity of filling materials during reclamation is the most curcial factor of the total construction cost of reclamation project. However, the estimation of loss ratio, defined as the ratio of loss amount to overall dumped amount, mostly depends on the empirical methods and formulae based on the material characteristics due to the lack of sufficient literature about the loss ratio according to hydraulic conditions. In this studies the loss ratio of materials considering flow conditions and material characteristics were examined through hydraulic experiments. A series of hydraulic experiments was conducted using five different hydraulic conditions and two types of materials such as sand and anthracite in a horizontal rectangular flume ($13.0m{\times}5.0m{\times}0.10m$), in which a round type revetment was installed. It is found that the loss ratio generally tends to increase with increasing the particle Froude number regardless of the types of materials. Also, when the flow velocity(u) becomes higher than the critical flow velocity ($u_c$), the loss ratios of sand and anthracite are dramtically increased up to 7.4% and 24.4%, respectively. As a future work, more specific mean velocities will be considered to figure out the loss ratio and more accurate estimation of amount of filling materials will be possible to present with confidence.

• Journal of Korean Society of Rural Planning
• /
• 제21권2호
• /
• pp.11-21
• /
• 2015

This study carried out evaluation of vulnerability in accessability and functionality using road network that was extracted from Intelligent Transportation System(ITS) and digital map. It was built in order to figure out accessability that locational data which include community center, public facilities, medical facilities and highway IC. The method for grasping functionality are Digital Elevation Model(DEM) and land slide hazard map provided by Korea Forest Service. The evaluation criteria for figure out accessability was set to related comparison of average time in urban area. Functionality value was calculated by the possibility of backing the vehicle possibility of snowfall and landslides. At last, this research computed weighting value through Analytic Hierarchy Process (AHP), calculated a vulnerable score. As the result, the accessability of rural village came out that would spend more time by 1.4 to 3.2 times in comparison with urban area. Even though, vulnerability of the road by a snowfall was estimated that more than 50% satisfies the first class, however, it show up that the road were still vulnerable due snowing because over the 14% of the road being evaluated the fifth class. The functionality has been satisfied most of the road, however, It was vulnerable around Lake Daechung and Piban-ryung, Yumti-jae, Suriti-jae where on the way Boeun. Also, the fifth class road are about 35 km away from the city hall on distance, take an hour to an hour and a half. The fourth class road are about 25 km away from the city hall on distance, take 25 min to an hour. The other class of the road take in 30 min from the city hall or aren't affected of weather and have been analyzed that a density of road is high. In A result that compare between distribution and a housing density came out different the southern and the eastern area, so this result could be suggested quantitative data for possibility of development.

• Spatial Information Research
• /
• 제12권3호
• /
• pp.285-298
• /
• 2004

Transportation digital map has built based on NGIS (national geography institute's 1 :5000 digital database) which derived from the aerial photo materials. Transportation digital map is a part of National Transportation Database Building Project carried out by the Korea Transport Institute and Ministry of Construction and Transportation. Transportation digital map for the purpose of transportation plan and investment has been updated and corrected the NGIS database especially for road network. Transportation digital map database is essential basic data fully applied for transportation policy and planning. The database must be reliable and objective to be applied for national transportation policy decision and transportation analysis. In addition, it needs accuracy and currentness to reflect the road network for the survey year. To satisfy the purpose of the database, following steps are necessary first, data Production and building has to be done by guideline of survey and database building. Secondly, geometric and logical errors which can occur during the survey and database building should be carefully detected. Thirdly, sectional guideline for database examination and procedure needs to be set up systematically and coherently This study is about examination guidelines for section and procedure on nodes and links which are essential object in transportation digital map database. According to the type of error, consistent and systematic error examination can lead to quality guarantee for objective and reliable database.

• Strategy21
• /
• 통권41호
• /
• pp.261-293
• /
• 2017

Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.