• 한국조경학회지
• /
• 제26권2호
• /
• pp.240-250
• /
• 1998

This study is to have attempted to analyze the characteristics of the change in forest landscape pattern of Seoul for 18 years by grasping it through satellite image data on the forest area in Seoul where a rapid change according urbanization and industrialization is going on. On the basis of Landsat MSS data- satellite image data, this writer analyzed the change in the number and size of patch and the mean edge length of each forest land, and the index of patch shape by each year from a landscape -ecological point of view. The results are as follows; First, in the pattern change of the forest patch of Seoul, the highest patch fragmentation area is the forest of the Yangchon-gu district where is decreasing it forest area by 654ha, 511ha, 495ha, 402ha each year from its total size of 742ha in 1979. Second, the change tendency shows that the average forest size decreased at 552.58ha in 1983, 435.03ha in 1988, 396.23ha in 1992, and 379.96ha in 1996. And analysis showed that even in the number of patches, the forest fragmentation phenomenon was presenting by the increase of development disturbance. Third, the mean edge by year was longest at 23,385m in 1979, but it is decreasing continuously. This shows the regular and artificial uniformity of forest landscape by disturbance-effect increase of the built-up development and shows low portion against edge effect by the time-series change like 1979>1983>198>1992>1996. Finally, in the analysis of a shape index indicated by ratio of size and edge, total averages were 2.56, 2.33, 2.17, 2.14, 2.14 each year, so that it is considered that the disturbance and ecological health status against forest landscape can be grasped according to being examined as 1979>1983>1988>1992, 1996 by the time-series change of the landscape.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.232-241
• /
• 2016

The turbocharger, to decrease the harmful exhaust gas(CO, HC and etc.) and $CO_2$ emission as well as the increase of the engine output, would be an useful method for engine downsizing. Therefore the thermal endurance of turbine blade, the lubrication of turbine shaft and the engine knock according to the supercharge of the inlet air, had been studied. And there had been much progress in these research tasks to be achieved a breakthrough. But a study on the built-in WGV of a gasoline engine for a passenger car which may effect on the engine performance, is few. In this paper, the effect of the embedded WGV on the engine performance was performed through the endurance test, which was conducted more than 300 hrs using the 4 stroke, 1998 cc, water-cooled engine. To sum up the major results, there were an abrasion in the area of the WGV head edge and the thermal deformation on the WGV head face, These phenomena led to reducing the boost pressure which caused the reduction in the volumetric efficiency of the engine. It resulted in decreasing the engine power gradually during the life cycle of the embedded WGV.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.66-71
• /
• 2008

Diamond-like-carbon (DLC) coatings could be good candidates as solid lubricants for cutting tools in dry machining of aluminum alloy. In this work, DLC thin films were produced as a friction reduction coating for WC-Co insert tip using the plasma immersion ion beam deposition (PIIED) technique. DLC coatings were also coated on $Al_2O_3$ specimens and high temperature wear tested up to $400^{\circ}C$ in dry air to observe the survivability of the DLC coating in simulated severe cutting conditions using a pin-on-disc tribotester with Hertzian contact stress of 1.3GPa. It showed reduced friction coefficients of minimum 0.02 up to $400^{\circ}C$. And cutting performance of DLC coated WC-Co insert tips to Al 6061 alloy were conducted in a high speed machining center. The main problems of built-up edge formation in aluminum machining are drastically reduced with improved surface roughness. The improvements were mainly related to the low friction coefficient of DLC to Al alloy and the anti-adhesion of Al alloy to WE due to the inertness of DLC.

• 한국농촌건축학회논문집
• /
• 제8권1호
• /
• pp.111-120
• /
• 2006

Our ancestor has accumulated inimitable a building system from experience. and they finally invented Gu-dul that heat the stone as a hitting system. The purpose of this study is to investigate and to write down the on Excavation & Restoration of Traditional Gu-dul in Young-dong. It was found that Gu-dul was the most suited for natural condition. That is wind, direction, earth level. As the results of analyzing the built- technque of traditional Gu- dul : 1) The Gu-dul type is lined, scattered, and mixed. 2) The hight of bank is 25-30cm, 3) The depth of Gaejari is 30-45cm, and The slope of that is gentle. 4) The slope of Gorae(a floor hitter) is 5 - 8%. (from the middle to the edge and from the lower part to the upper part) Therefore, For the practical application of future houses, it will be needed to develop the reasonable hitting system, and suggest to set up Gu-dul for our health and saving energy.

• 한국정밀공학회지
• /
• 제5권4호
• /
• pp.32-38
• /
• 1988

Apaptive cintrol of machine tool is aimed to change cutting state satis- factorily without aid of a machine operator, if the cuting state is abnomal such as formation of tangled ribbon type chip, built-up edge and generation of chattering and so on. Among these the recognition of chip type is one of the most important since it has imlications relate to : 1. Safety of operator 2. Stoppage of work due to entanglment in tool and workpiece of chip 3. Problem of producted chip control In this paper the chip type is discriminatied by the pattern recognition technique. It is found that the power spectrum of cutting force for each chip type has it's own special pattern. Linear discriminant function for the recognition of the chip type is obtained by learning process. The discriminant function can be the basis of adaptive control for the rate of success of recognition by pattern recognition technique is at leasthigher than 83%.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.147-153
• /
• 1992

This study was undertaken to investigate the cutting behaviour of super duralumin (A2024-T3) with sintered carbide tool(P20). The cutting test was carried out under different conditions such as cutting speed, cutting depth and rake angle, etc. The specific cutting force Kc and Kt of vertical and radial forces decreases as cutting speed increases, especially the decrease rate of Kt becomes larger than of Kc as cutting speed increases. Kc and Kt in small cutting depth are much affected by work-hardening of surface layer. The chip width and shear angle become layer as cutting depth increases, especially chip width at feed of 0.1mm almost approaches cutting width. Relation between the friction coefficient of chip side and tool rake angle side can make the modelization studying the built-up edge size. The shear angle model equation of super duralumin generally agree with theory of Ernst-Merchant.

• 한국환경복원기술학회지
• /
• 제14권6호
• /
• pp.119-130
• /
• 2011

Land-use changes have made considerable impacts on humans and nature such as biodiversity and ecosystem services. It is recognized as important elements for land use planning and regional natural resources conservation to identify the major causes of land use changes and to predict a process of changes and effects. This study, by using a spatially explicit Dyna-CLUE model, analyzed correlations between driving factors, quantified location characteristics of different land use types using logistic regression analysis and examined future land use changes and its effects in Yangpyeong and Yeoju region. We expected land use changes based on the three scenarios with different future land demands and simulated future changes for spatial variations of land use for the 20 years. The outcomes shows that larger change was found in agricultural areas than forest areas, based on the change in built-up areas. The changes in forest areas, which were mainly occurred in edge area, were expected to affect a large impact on its ecotone. It was found to be the importance of the management of forest edge and the necessity of the environmentally sound and sustainable development in order to conserve natural resources of the region.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.49-66
• /
• 1990

In order to identify an unknown wood sample native to Korea. the softwood databases(KSWCHUN; Korean SoftWood CHUN) and the hardwood databases(KHWCHUN; Korean HardWood CHUN) had been built. and the new computer searching programs(IDINEX; IDentification INformation EXpress) has been written in Turbo Pascal(V.5.0) and in Macro Assembly(V.5.0). The characters of the data were based on the 74 features of softwood and on the 148 features of hardwood which are a part of new "IAWA list of microscopic features for hardwood identification" published in 1989. For the purpose of this investigation the wood anatomical nature of 25 species of softwood(13 genera of 5 families) and of 112 species of hardwood(57 genera of 31 families) were observed under a scanning electron microscope and light microscope. and a lot of literature used. The IDINEX programs are based on edge-punched card keys. with several improvements. The maximum number of features in the IDINEX is 229. but that is fixed for a given database. Large numbers of taxa are handled efficiently and new taxa easily added. A search may be based on sequence numbers of features. Comparisons are made sequentially by feature and taxon using the entire suite of features specified to produce the list of possible matching taxa. The results are followings. (1) The databases of Korean wood and the searching programs(IDINEX) had been built. (2) The databases of Korean wood could be an information to search an unknown wood. (3) The databases would be valuable. for the new features, which were not mentioned in Korean wood up to the present. were observed in details. (4) The ultrastructures of the cell walls(warty layer) and crystals observed under a scanning electron microscope will be helpful to search an unknown wood in particular. (5) The searching process is more quick and accurate than the others. 6) We can obtain the information on the differences of a species from the other and search an unknown wood using probability. in IDINEX, (7) The IDINEX will be utilized to identify and classify an animal life, vegetable world, mineral kingdom, and so on.

• 한국조경학회지
• /
• 제29권1호
• /
• pp.124-130
• /
• 2001

We have increasing number of new ponds planned and designed in traditional styles. However, many of the stoneworks at the edges of those new ponds are not the characteristics of our traditional ponds. This study is aiming at surveying and analysing the building techniques of Korean traditional water edges built with stones, by investigating selected ponds in royal palace gardens. This study was conducted through field investigation and literature reviews. Nine ponds from Gyongbok Palace, Changdeok Palace, and Changgyong Palace, which have many well-preserved ponds of various styles, were surveyed. First of all, the building materials (stones), or the kinds and sizes of stones used for the edges of ponds were surveyed. Secondly, construction methods, or the height and techniques of buildings stone walls were surveyed. Major findings were, first, the edges of most ponds constructed with granite Jangdaeseok, usually 120cm-140cm long, and 30cm-40cm thick. The only exceptions were those ponds which seemed to have been influenced by Japanese style. Second, typical pond ages were up-right vertical walls. Granite jangdaeseoks were piled-up 2 stories or up to six stories. Exceptions were Bandoji Pond and Chundangji Pond which had been constructed during latest period(King 'Ghojong' period). Third, heith of stone walls were between 60cm and 220cm. The depth of ponds were about 150cm or less, and the rest of the edge wall height was freeboard. Though the results of this study was not made by precise investigation and actual measurement, they could be fundamental information and data for the traditional styles of the Chosun dynasty Palace. It is believed that continuous researches on this matter will result in important and fundamental data of the establishment of traditional water edges.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.309-311
• /
• 2005

Single crystals of the new pentanary thiophosphate, $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been prepared through reactions of the elements with halide fluxes. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ has been analyzed by single crystal X-ray diffraction technique. The structure of $K_{0.5}Ag_{0.5}Nb_2PS_{10}$ is made up of one-dimensional ${^{\infty}_1}[Nb_2PS_{10}]$ chains along the [001] direction and these chains are separated from one another by $Ag^+$ and disordered $K^+$ ions. This chain is basically built up from bicapped trigonal prismatic [Nb2S12] units and tetrahedral [PS4] groups. The [$Nb_2S_{12}$] units are connected together to form the linear chain, ${^{\infty}_1}[Nb_2S_9]$ by sharing the S-S prism edge. Short (2.885(2) $\AA$ or 2.888(2) $\AA$) and long (3.743(1) $\AA$) Nb-Nb distances are alternating along the chain, and the $S_2{^2-}]\;and\;S^{2-}$anionic species are observed. The distorted octahedral coordination around the $Ag^+$ ion can be described as [2+4] bonding interaction.