• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.476-479
• /
• 2004

1970년대 산업화의 과정에서 인구의 도시 집중으로 인한 주택수요의 급격한 증가로 우리나라의 주택정책은 공급위주의 편향된 방향으로 진행되었다. 급속한 공동주택의 보급은 품질의 조악화에 따른 조기 노후화의 문제를 유발하였으며, 재건축과 리모델링이 이를 해결할 수 있는 방안들로 대두되었다. 따라서 본 연구에서는 소유자들이 스스로 주체가 되어 자신들의 공동주택에 대한 합리적인 의사결정을 도모할 수 있도록 재건축과 리모델링을 판단하는 평가방법을 제시하고자 한다. 우선 평가 항목 선정 과정을 통해 기능성과 경제성을 평가항목으로 설정하고, 재건축과 리모델링 의사결정을 위한 방법을 설정하기 위하여 계층화분석법을 이용하였으며, 기능성과 경제성 평가항목의 평가치를 통일하기 위하여 다기준의사결정법의 벡터규준화와 선형변환 과정을 이용하였다. 이러한 평가방법을 통해서 노후 공동주택의 소유자 조합이 합리적으로 대안을 선택할 수 있을 것으로 판단된다.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• 건축역사연구
• /
• 제13권1호
• /
• pp.53-69
• /
• 2004

Located in a rear garden of Changdeok Palace, Yeonkyeong-Dang is valued as the most characteristic building of the houses of aristocrats of the later Joseon Dynasty. The time of the construction has been much debated, however, it is perceived through this research that the construction was completed in September 1827(the 27nd year of king Sunjo's reign). The shape of the buildings during this period resembles a letter ㄷ as shown in the picture of Dong-Kweol. We previously described that the purpose of Yeonkyeong-Dang was to carry the portrait of king Yikjong while keeping the shape of building when it was first established until the 8th year of king Heonjong (1842). In 1865 (the 2nd year of king Gojong's reign), it was reconstructed with very different outlook which has remained the present shape. The characteristic features of the residences of aristocrats were reflected in newly reconstructed Yeonkyeong-Dang. The structure was largely divided into two quarters that occupied by male and female residents respectively. The two quarters were bordered by fences and added with a study and a pavilion. The reconstruction was conducted by king Gojong's father, Daewon- Goon and its purpose was to prepare a separate house for the king and queen before the kings wedding that was about to come. During the 19th century, building an imitation of houses of aristocrats became quite a trend in the palace. Built in 1847, Nakseon-Jae was precedented and followed by Yeonkyeong-Dang. Also later Geoncheong Palace was built in Kyeongbok Palace in 1873. All of the three buildings imitated houses of aristocrats. Divided residences of male and female sections and splendid decorations were common features. Nakseon-Jae was the smallest in the structure of spaces, ornamentation of details and its sizes, Yeonkyeong-Dang was the second and Geoncheong Palace was the most distinguished building. The constructions of these three buildings created an innovative architectural wave in the 19th century palace. Yeonkyeong-Dang was the building that mediated the new flow of architectural structure in the 19th century palace.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.23-30
• /
• 2011

International cooperation to reduce greenhouse gas emissions is expected to provide a big crisis and a great opportunity at the same time for our industry that heavily consumes energy. To cope actively with the international environmental regulation, such as the Framework Convention on Climate Change, quantitative measurement of the volume of greenhouse gases emitted by various industries and quantitative prediction of the greenhouse gas emissions of the future are becoming more important than anything else at the national level. This study aims to propose the calculation process of carbon dioxide($CO_2$) emission for building in life cycle. This paper describes and compares 9 different tool for environmental load estimation with LCA. This study proposed the calculation process for quantitatively predicting and assessing $CO_2$ emissions during the life cycle of buildings based on the life cycle assessment(LCA). The life cycle steps of buildings were divided into the design/supervision, new construction, repair, renovation, use of operating energy in buildings, maintenance, and reconstruction stage in the life cycle inventory analysis and the method of assessing the environmental load in each stage was proposed.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.181-186
• /
• 2010

Research on construction waste unit was in progress in the 1995 when 'Proper Disposal and Recycling Measures for Construction Waste' was made by the Seoul Development Institute. Such an effort has been made in order to cope with the lack of natural resources in Korea and to utilize the reusable resources. Furthermore, these efforts have also increased due to the improved standing of Korea in the international community. A large number of residential buildings were built in the response to the government's policy by increasing the supply of houses between the 1970's and 1980's. In 2000, more reconstruction and redevelopment was done because of the aged buildings and change of use for those buildings. And the project has been actively promoted until now, which caused a sharp increase in the generation volume of construction waste. In Korea, 8 kinds of construction waste unit, including the standard construction manpower and materials estimation, are introduced. Currently, they provide standards to different building categories and waste properties while for construction sites different standards are applied. This study aims to measure the actual amount of construction waste after sample buildings are dismantled and analyzes the estimation of the waste quantity by using various standard units. Through comparison, this study will figure out the differences among the standard units in order to find out how to apply the standard units properly. Moreover, this research will provide practical measures to apply such units to construction sites.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.463-466
• /
• 2007

In this study, 3D building reconstruction and road design were performed using LiDAR data, digital map and airborne digital image. Information for tourism was extracted from digital maps (scale: 1/5,000) of Jeju Island, and then route of the road was determined for road design. Reconstructed buildings, aerial image and designed road were overlayed with tourism information for 3D simulation. In addition, landscape analysis was performed and result of the road design was visualized.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.157-158
• /
• 2023

Building Information Modeling (BIM) design has been mandatory in Korea since 2016, and it has been gradually expanding in the industry, with a slow attempt to apply it in remodeling constructions. This is because Korea is facing a situation where many buildings are over 30 years old and require remodeling or reconstruction. The remodeling industry is also a growing market, as it saves construction time and cost compared to reconstruction. BIM is an ideal technology element for a competitive remodeling construction, as remodeling constructions face a complicated construction process from the start, including demolition, maintenance, and reinforcement to save the change process. However, there are still limitations in applying BIM to remodeling constructions, due to considerations of the existing building and the complicated requests of the inhabitants. BIM still has technical and environmental limitations for general use. In this study, I analyzed BIM application cases from existing studies and suggest what improvement points should be strengthened.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.211-212
• /
• 2023

Building Information Modeling (BIM) design has been mandatory in Korea since 2016, and it has been gradually expanding in the industry, with a slow attempt to apply it in remodeling constructions. This is because Korea is facing a situation where many buildings are over 30 years old and require remodeling or reconstruction. The remodeling industry is also a growing market, as it saves construction time and cost compared to reconstruction. BIM is an ideal technology element for a competitive remodeling construction, as remodeling constructions face a complicated construction process from the start, including demolition, maintenance, and reinforcement to save the change process. However, there are still limitations in applying BIM to remodeling constructions, due to considerations of the existing building and the complicated requests of the inhabitants. BIM still has technical and environmental limitations for general use. In this study, I analyzed BIM application cases from existing studies and suggest what improvement points should be strengthened.

• 대한전자공학회논문지SP
• /
• 제37권4호
• /
• pp.46-55
• /
• 2000

본 논문에서는 스테레오 항공 영상으로부터 영상에 포함된 건물의 3차원 복원을 위해 건물 형태에 대한 모델을 생성하고 건물 모델을 구성하는 선소를 찾아 건물을 복원하는 알고리듬에 대해 다루고 있다. 건물을 검출하기 위해 일반적으로 필요한 에지 검출, 에지의 직선화, 선소의 연결 등의 복잡한 과정을 거치지 않고 복원하는 건물을 몇 개의 파라미터값으로 표현하고 건물 모델을 이용하여 원영상에서 건물의 선소들을 직접 검출하는 새로운 방법을 제안하였다. 선소 검출시 건물을 구성하는 각각의 선소에 대해 선소 측정 함수를 동시에 적용하여 독립적인 선소 검출 방법보다 건물 검출의 정확도를 높였다. 제안한 알고리듬을 스테레오 항공 영상에 적용한 결과, 건물의 정확한 검출 및 복원 결과를 얻을 수 있었다.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.923-928
• /
• 2022

Wildfire disasters in the United States impact lives and livelihoods by destroying private homes, businesses, community facilities, and infrastructure. Disaster victims suffer from damaged houses, inadequate shelters, inoperable civil infrastructure, and homelessness coupled with long-term recovery and reconstruction processes. Cities and their neighboring communities require an enormous commitment for a full recovery for as long as disaster recovery processes last. State, county, and municipal governments inherently have the responsibility to establish and provide governance and public services for the benefit and well being of community members. Municipal governments' comprehensive and emergency response plans are the artifacts of planning efforts that guide accomplishing those duties. Typically these plans include preparation and response to natural disasters, including wildfires. The standard wildfire planning includes and outlines (1) a wildfire hazard assessment, (2) response approaches to prevent human injury and minimize damage to physical property, and (3) near- and long-term recovery and reconstruction efforts. There is often a high level of detail in the assessment section, but the level of detail and specificity significantly lessons to general approaches in the long-term recovery subsection. This paper aims to document the extent of wildfire preparedness at the county level in general, focusing on the long-term recovery subsections of municipal plans. Based on the identified challenges, the researchers provide recommendations for better longer-term recovery and reconstruction opportunities: 1) building permit requirements, 2) exploration of the use of modular construction, 3) address through relief from legislative requirements, and 4) early, simple, funding, and the aid application process.