• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.23-30
• /
• 2011

International cooperation to reduce greenhouse gas emissions is expected to provide a big crisis and a great opportunity at the same time for our industry that heavily consumes energy. To cope actively with the international environmental regulation, such as the Framework Convention on Climate Change, quantitative measurement of the volume of greenhouse gases emitted by various industries and quantitative prediction of the greenhouse gas emissions of the future are becoming more important than anything else at the national level. This study aims to propose the calculation process of carbon dioxide($CO_2$) emission for building in life cycle. This paper describes and compares 9 different tool for environmental load estimation with LCA. This study proposed the calculation process for quantitatively predicting and assessing $CO_2$ emissions during the life cycle of buildings based on the life cycle assessment(LCA). The life cycle steps of buildings were divided into the design/supervision, new construction, repair, renovation, use of operating energy in buildings, maintenance, and reconstruction stage in the life cycle inventory analysis and the method of assessing the environmental load in each stage was proposed.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.47-56
• /
• 2009

Housing Performance Rating Indication System was started in 2006. The aim of Housing Performance Rating Indication is to provide the guideline of housing performance. Repair Convenience is similar to Remodeling. Remodeling has been paid more attention as an alternative for reconstruction. Especially, now the actual house supply is facing almost 100%, it is time to keep and maintenance management of apartment buildings, and ultimately it will expand the Long life housing. Especially consumers has to have a right to select apartment buildings by comparing performance of house. For construction companies, they need a performance code that standardized by government, so they can provide a Certain performing house. This study examines data which has been obtained from the recent application of Housing Performance Rating Indication System and Repair Convenience category is main concern. Findings from the study will provide vital information in improving current Housing Performance Rating Indication System.

• Journal of the Korean Institute of Educational Facilities
• /
• v.3 no.3
• /
• pp.41-57
• /
• 1996

본 연구는 광희중학교 학구내에서 재개발로 인하여 증가되는 인구수을 예측하여 장래 중학교 학생수를 예측하였다. 2016까지 학급당 학생수를 37명으로 하고 36학급 규모의 학교를 추구한다면 중학교는 적어도 1개 더 건축하여야만 재개발로 늘어나는 제1학군의 학생수를 수용할 수있을 것음을 분석하였다. 또, 교과과정을 분석한 결과 도덕 2.5교실, 국어 6교실, 사회 5교실, 수학 5교실, 과학 5교실, 체육 4교실, 음악 2교실, 미술 2교실, 가정 1.5교실, 기술 3교실, 영어 5.5교실, 한문 1교실, 컴퓨터 1교실로 분석되어 이용율이 88%가 되었다. 본 연구는 광희중학교 구체적 건축계획에 앞서 계획의 모델을 설정하여 이를 토대로 계획에 임하였다. 광희중학교 주변의 접근성, 교통 조건, 소음 상태, 지역사회인의 이용, 전망 등의 환경 분석을 토대로 4개의 죠닝(Zonning)안을 제시하여 평가한 후 가장 바람직한 안을 선정하였다. 이를 토대로 브록(Block)프랜을 5개 작성하여 평가후 1개 안을 채택하여 구체적 평면 계획안을 작성하였다. 36학급 37명 학생수를 기준으로 교과교실형으로 계획하였으며 특별 교실형의 학습도 가능하게 계획하였다. 교수, 학습의 복합화에 대처하여 칸막이를 이동 가능한 형태로 계획하였으며, 일반 교과도 컴퓨터를 이용한 수업이 가능하게 정보 코너를 설치하였다. 지역사회인에게 열린 교실이 되게 계획하였고 개별 학습이 가능한 구조로 계획하교 기자재의 선진화를 대비한 학습 환경의 제고도 고려하였다. 본 연구의 입면 형상은 주변 건물과 조화되게 수평적 요소가 강조되는 형상이 되도록 계획하며 고층의 아파트의 위협을 상쇄시키기 위하여 지붕이 있는 구조로 계획하여 지역사회에서 중심임을 강조하도록 계획하였다.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.407-413
• /
• 2018

In this paper, we present a scalable data delivery infrastructure for such IoT computing environment where we need a common platform where data providers share their diverse sensing data and applications can easily access and receive such data from providers. For efficient data delivery, this paper proposes a new delivery path management technique that take advantage of diverse consumer QoS when building bandwidth-efficient delivery paths. We perform primitive experiments on the path construction and reconstruction which may be major overhead of the scalable infrastructure. The results show that the proposed infrastructure achieves a high level of scalability, and demonstrates that the management overhead is not significant.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.5
• /
• pp.425-433
• /
• 2020

Three-dimensional data has been used for different applications such as robotics, building reconstruction, and so on. 3D data can be generated from an optical camera or a laser scanner. Especially, a wearable multi-sensor system including the above-mentioned sensors is an optimized structure that can overcome the drawbacks of each sensor. After finding the geometric relationships between sensors, georeferencing of the datasets acquired from the moving system, should be carried out. Especially, in an indoor environment, error propagation always causes problem in the georeferencing process. To improve the accuracy of this process, other sources of data were used to combine with LiDAR (Light Detection and Ranging) data, and various registration methods were also tested to find the most suitable way. More specifically, this paper proposed a new process of NDT (Normal Distribution Transform) to register the LiDAR point cloud, with additional information from other sensors. For real experiment, a wearable mapping system was used to acquire datasets in an indoor environment. The results showed that applying the new process of NDT and combining LiDAR data with IMU (Inertial Measurement Unit) information achieved the best result with the RMSE 0.063 m.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.181-186
• /
• 2010

Research on construction waste unit was in progress in the 1995 when 'Proper Disposal and Recycling Measures for Construction Waste' was made by the Seoul Development Institute. Such an effort has been made in order to cope with the lack of natural resources in Korea and to utilize the reusable resources. Furthermore, these efforts have also increased due to the improved standing of Korea in the international community. A large number of residential buildings were built in the response to the government's policy by increasing the supply of houses between the 1970's and 1980's. In 2000, more reconstruction and redevelopment was done because of the aged buildings and change of use for those buildings. And the project has been actively promoted until now, which caused a sharp increase in the generation volume of construction waste. In Korea, 8 kinds of construction waste unit, including the standard construction manpower and materials estimation, are introduced. Currently, they provide standards to different building categories and waste properties while for construction sites different standards are applied. This study aims to measure the actual amount of construction waste after sample buildings are dismantled and analyzes the estimation of the waste quantity by using various standard units. Through comparison, this study will figure out the differences among the standard units in order to find out how to apply the standard units properly. Moreover, this research will provide practical measures to apply such units to construction sites.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.30-41
• /
• 2013

Augmented reality techniques have been increasingly employed in the textile and fashion industry as well as computer graphics sectors. Three-dimensional virtual clothing CAD systems have also been widely used in the textile industries and academic institutes. Motion tracking techniques are grafted together in the 3D and augmented reality techniques in order to develop the virtual three-dimensional clothing and fitting systems in the fashion and textile industry sectors. In this study, three-dimensional virtual clothing sample has been prepared using a 3D virtual clothing CAD along with a 3D scanning and reconstruction system. Motion of the user has been captured through an RGB-D sensor system, and the virtual clothing fitted on the user's body is allowed to move along with the captured motion flow of the user. Acutal fabric specimens are selected for the material characterization. This study is a primary step toward building a comprehensive system for the user to experience interactively virtual clothing under real environment.

• Journal of the Korean Society of Safety
• /
• v.37 no.6
• /
• pp.71-80
• /
• 2022

Since the 2000s, the demand for private demolition works has been gradually increasing as the apartment housing market has been led by redevelopment and reconstruction. In the case of the military, the Ministry of National Defense is consolidating troops from each military unit to reorganize the unit structure in accordance with Defense Reform 2.0; the plan includes reducing the garrison used by each unit to 70% of its current level. Accordingly, the demand for demolition work in the military is also expected to increase. However, the military regulations do not reflect the relevant laws that have been revised recently. This study identifies regulations and system improvements for demolition work suitable for the military based on an analysis of accident cases that have occurred during demolition work, of domestic and foreign laws and regulations related to military demolition work, and of the problems with current military safety management at each stage of planning, design, and construction. The study subsequently proposes improvements for military demolition work, including budget execution adjustment, the establishment of training courses, on-site inspections, the development of guidelines for military demolition work, the provision of risk assessment standards, and the need for the qualification of equipment operators.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2022

Among Korea's national folk cultural heritage, eight villages have been designated, and 37 years have passed since Hahoe Village was first designated in 1984. All eight villages have been constantly inhabited by residents from the past to the present, so the cultural value of inferring the lives of our ancestors in the past is very high. However, due to the inconvenience of the settlement environment in existing houses due to changes in the living environment, buildings such as various residential facilities and warehouses have been installed and expanded without permission, losing the original cultural property landscape and building. In addition, complaints and conflicts from residents are accumulating due to the poor living environment in the village. Therefore, this study intends to present guidelines for conservation and maintenance that can embrace changes in resident's housing and living environment, based on the 'maintenance of original form', the grand principle of the Cultural Properties Protection Law about the Jeju Seongeup Village. In particular, the maintenance plan is largely subdivided into legalization, demolition, expansion and reconstruction, and detailed standards for each item and examples applied are proposed. Through this, it aims to become basic data on the starting point of realistic improvement measures for cultural properties and residents to coexist.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.431-439
• /
• 2009

These days the amount of demolished concrete waste has been increasing due to reconstruction and redevelopment of aged buildings. So the use of recycled aggregates is recommended to solve environmental problems. Some investigations have been carried out to study the flexural behavior of reinforced concrete beams with recycled aggregates. But these have some limitation due to the use of low quality recycled aggregates and small-scale specimens in the laboratory. The purpose of this experimental study is to evaluate the flexural behavior of simply supported RC beams subjected to four-point monotonic loading and made with recycled aggregates. Seven full-scale RC beams were manufactured with different replacement level of recycled aggregates. The main parameters of the study are combination of aggregates. From the test results, the flexural behavior of the beam is described in terms of crack patterns and failure modes. And the flexural strength of RC beam with different types of recycled coarse aggregates and recycled fine aggregates is compared with the provision of KCI code.