• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권3호
• /
• pp.101-107
• /
• 2007

Indoor air quality becomes of a concern recently in view of human health. This study investigates the air diffusion performance and the air change efficiency of a classroom, when outdoor air is introduced in two different ways in addition to the heating/cooling operation of a ceiling-mounted heat pump. A CFD analysis has been performed to investigate the effect of the discharge angle of the air jets from the heat pump for both parallel and series types of outdoor air system. It is observed that the series type creates more uniform indoor environment compared to the parallel type in general. It can be concluded the discharge angle should not be larger than 40o for the parallel type, in order not to generate thermal stratification in the room.

• 디자인학연구
• /
• 제13권1호
• /
• pp.87-100
• /
• 2000

본 논문은 디자인 사고에 대한 이해를 바탕으로 모던 디자인 현상에 자리하는 디자인 사고를 고찰하고 있다. 디자인이라는 언어를 통해 일상 삶을 변화시키고자 했던 모던 디자인의 기획은 기하학적 조형과 기능에의 집착, 기계의 적극적 수용 등과 같은 구체적 현상으로 발현되었다. 그 이면에는 '효율과 편리에 대한 집착', '환원된 필요를 기능과 대응시키는 전략', '전문가 시스템을 바탕으로 한 부분의 합이 전체라는 믿음', '사적 공간과 공적 공간을 구분하는 것과 같은 이분법적 사고'들이 자리하고 있다. 수공예적인 생산양식에서 기계적 생산양식으로의 이행과 자아에 대한 인식 등이 가능했던 사회 분위기가 이러한 디자인 사고를 가능하게 하였다.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1072-1078
• /
• 2005

The present study has been conducted to tune a PID controller for large thermal systems such as a thermal environment chamber. In spite of large thermal mass of the thermal chamber under test, its response delay time was found to be negligible mainly due to high air recirculation rate. In general, heating and cooling capacities tend to be small compared the size of a thermal environment chamber, which leads to long transient periods of one hour or so. In the study, a PI tuning method is suggested which makes system responses faster while reducing overshoots and hunting by utilizing efficiently proportional band of actuators.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.487-496
• /
• 2012

Recently, utilization of building foundations as ground-coupled heat exchangers has attracted much attention because they reduce the cost and enhance the heat transfer. The objective of this study is to evaluate the performance of energy-slab ground-coupled heat exchanger installed in a commercial building. In order to demonstrate the energy transfer characteristics of the energy-slab, experiments were conducted from October 2010 to September 2011. The 1-year measurement results showed that the mean EWTs of brine returning from the energy-slab were $9.6^{\circ}C$ in heating season and $24.9^{\circ}C$ in cooling season, which were in a range of design target temperatures. In addition, the geothermal heat pump system with the energy-slab showed on-off operation according to the setting temperatures of secondary fluid in water storage tank. The results also showed that the energy-slab extracted heat of 198.6 kW from the ground and injected heat of 318.9 kW to the ground, respectively.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.292-300
• /
• 2014

The Laplace Transform solution is used as a mathematical model to analyse the thermal performance of the building constructed using different wall materials. The solution obtained from Laplace Transform is an analytical solution of an one dimensional, linear, partial differential equation for wall temperature profiles and room air temperatures. The main purpose of the study is showing the detail of obtaining solution process of the Laplace Transform. This study is conducted using weather data from two different locations in Korea: Seoul, Busan for both winter and summer conditions. A comparison is made for the cases of an on-off controller and a proportional controller. The weather data are processed to yield hourly average monthly values. Energy consumption load is well calculated from the solution. The result shows that there is an effect of mass on the thermal performance of heavily constructed house in mild weather conditions such as Busan. Building using proportional control experience a higher comfort level in a comparison of building using on-off control.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권1호
• /
• pp.3-10
• /
• 2016

국내 히트펌프 유닛에 대한 성능 기준은 KS C 9306에서 제시하는 표준조건에서의 COP로 표현된다. 그러나 히트펌프 시스템이 실제 건물에 적용될 경우에는 표준조건에서 운전되는 것이 아니기 때문에 현장의 기후 조건, 건물의 특성에 따라 히트펌프 시스템의 성능은 다르게 나타난다. 본 논문에서는 주거건물을 대상으로 국내 주요 도시의 기후 조건에 따른 공기 대 공기 히트펌프 시스템의 연성능을 평가하여 기존의 BIN 데이터를 활용한 연성능 평가 결과와 정량적으로 비교 분석하였다. 연성능 평가도구로는 IPMVP 4.4.2에서 제시한 국제호환형 프로그램인 TRNSYS를 사용하였다. 공기 대 공기 히트펌프 유닛의 멀티 성능 데이터를 적용한 경우, 연성능 평가 기준인 APF는 BIN 데이터를 적용했을 때보다 전체적으로 높았으며, 부산이 2.36으로 가장 높았고, 대전이 2.29로 가장 낮았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.78-80
• /
• 2014

Silicone structural glazing (SSG) is a method utilizing a silicone adhesive to attach glass, metal, or other panel material to the structure of a building. Windload and other impact loads on the facade are transferred from the glass or panel through the silicone structural sealant to the systems' framework. Silicone structural glazing systems are currently a very common method of glazing throughout the world. Locally, structural silicone glazing has become very common to achieve aesthetically pleasing and high utilization of small land for both residential and commercial building. Although structural silicone glazing has been utilized for approximately thirty years in Korea, the understanding of its technology was low and limited. Consequently, Korean projects experienced many quality issues during assembly and construction, even in very recently finished buildings. Adhesion loss and water infiltration occurred on more than one project, and the time and cost to repair these issues were substantial. In general, there are two kinds of structural silicones depending on fabrication methods. 1part structural silicone is for site glazing system and 2part structural silicone is for unitized factory glazing system. In this paper, 2part structural silicone which is very common for factory fabricating curtainwall systems was evaluated with regards to various mixing ratio. Since the structural performance of 2part sealant can be affected by mixing ratios, some extra ranges of recommended mixing ratio were evaluated to see any performance differences. Besides on cure profile, comparative evaluations for mechanical properties and adhesion develop on common building substrates were conducted.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.458-464
• /
• 2008

The structural health monitoring has been gaining more importance in civil engineering areas such as earthquake and wind engineering. The use of health monitoring system can also provide tools for the validation of structural analytical model. However, only few structures such as historical buildings and some important long bridges have been instrumented with structural monitoring system due to high cost of installation, long and complicated installation of system wires. In this paper, the structural monitoring system based on cheap and wireless monitoring system is investigated. The use of advanced technology of micro-electro-mechanical system(MEMS) and wireless communication can reduce system cost and simplify the installation. Further the application of wireless MEMS system can provide enhanced system functionality and due to low noise densities. Identification results are compared to ones using data measured from traditional accelerometers and results indicate that the system identification using wireless MEMS system estimates system parameters accurately.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.183-189
• /
• 2010

위치인식시스템은 이동로봇이 실내에서 주행하는데 가장 중요한 기술의 하나인데 본 논문에서 연구된 시스템은 GPS 시스템과 유사하게 3 개이상의 위성 비이컨에서 초음파와 무선통신파를 발사하고 로봇에 부착된 리시버는 초음파와 무선통신파의 수신되는 시간차를 계산하여 각 비컨까지의 거리를 구하고 또한 이로부터 로봇의 위치를 계산한다. 일반적으로 거리정보는 초음파의 한 파장 이내의 오차를 가지게 되는데 본 논문에서는 이에 따른 위치오차를 테일러 확장과 SVD(Singular Value Decomposition)를 이용하여 구하였다. 또한 본 논문에서는 거리오차에 따른 위치오차의 정확도를 잴 수 있는 값으로 민감도를 제시하였다.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.290-298
• /
• 2013

A walking navigation system (usually known as a locomotion interface) is an interactive platform which gives simulated walking sensation to users using sensed bipedal motion signals. This enables us to perform navigation tasks using only bipedal movement. Especially, it is useful for the certain VR task which emphasizes on physical human movement, or accompanies understanding of the size and complexity of building structures. In this work, we described system components of VR walking system and investigated several types of walking platform by literature survey. We adopted a MS Kinect depth sensor for the motion recognition and a treadmill which includes directional turning mechanism for the walking platform. Through the integration of these components with a VR navigation scenario, we developed a simple VR walking navigation system. Finally several technical issues were found during development process, and further research directions were suggested for the system improvement.