• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.75-77
• /
• 2014

Using sealant for window installation is sealing the gap between the window frame and outer wall (such as concrete). A sealant serves to prevent external environmental impacts such as moisture, rain, sand, and dust entering inside of the building and make the building durable. In order to fulfill basic jointing function of sealing, at least 6 mm joint gap between two bonding surfaces are required. Also, adhesion performance between sealant and surfaces and the compatibility with other building materials are required to check before installation. In general, 2 part polyurethane sealant and 1 part silicone sealant are most common materials for sealing the joint of window. In this study, adhesion performances of those two generic sealants reflecting actual application conditions and the compatibility evaluations with other building materials are conducted to propose proper window installation procedures.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.603-608
• /
• 2019

Plastic waste is becoming a problem in various countries because of the difficulty of natural decomposition. One type is PET plastic(Polyethylene Terephthalate), which is often used as a bottle for soft drink packaging, and LDPE(Low Density Polyethylene), which is also widely used as a food or beverage packaging material. The use of these two types of plastic continuously, without good recycling, will have a negative impact on the environment. Building material waste is also becoming a serious environmental problem. This study aims to provide a solution to the problem of the above plastic waste and building material waste by making them into a mixture to be used as bricks. Research is carried out by mixing both materials, namely plastic heated at a temperature of $180-220^{\circ}C$ and building material waste that had been crushed and sized to 30-40 mesh with homogeneous stirring. The ratios of PET and LDPE plastic to building material waste are 9 : 1, 8 : 2, 7 : 3, 6 : 4 and 5 : 5. After heating and printing, density, water absorption and compressive strength tests are carried out. Addition of PET and LDPE plastic can increase compressive strength, and reduce water absorption, porosity and density. A maximum compressive strength of 10.5 MPa is obtained at the ratio of 6 : 4.

• 청정기술
• /
• 제18권1호
• /
• pp.14-21
• /
• 2012

친환경 건축물에 사용되는 미네랄울, 폴리우레탄 등 전통적인 단열재로부터 최근에 주목받고 있는 VIP (Vacuum Insulation Panel), 에어로젤, 그리고 미래기술로 연구되고 있는 VIM (Vacuum Insulation Material), DIM (Dynamic Insulation Material) 등 단열재 및 단열 시스템의 특성과 장단점을 비교하였다. 매우 낮은 열전도율을 지닌 VIP 및 에어로젤은 기존 단열재에 비해 에너지 소모를 줄일 수 있으므로 주거면적을 크게 확대할 수 있는 장점이 있으며, 특히 에어로젤은 반투명 및 투명재질로 만들 수 있어 건물에 응용될 수 있는 가능성이 매우 크다. 단열재는 낮은 열전도율뿐만 아니라, 건설현장 응용성, 기계적강도, 내화성, 비용 및 환경영향 등을 고려하여야 하므로, 전통적인 단열재 및 최신 단열재를 활용하고 지속적으로 개선시키는 노력을 해야 할 것이다.

• 분석과학
• /
• 제22권1호
• /
• pp.57-64
• /
• 2009

이 연구에서는 건축자재로부터 방출되는 휘발성유기화학물과 폼알데하이드의 오염물질 방출강도를 포함하는 데이터베이스를 개발하였다. 건축자재 분류체계는 환경부와 한국공기청정협회에서 사용하는 분류체계와 연계하여 세분류하여 정립하였다. 개발된 데이터베이스는 각 건축자재로부터 방출되는 총휘발성유기화합물과 5가지 휘발성유기화합물, 그리고 폼알데하이드의 방출강도를 포함하며 화학적 성분 및 일반적인 정보를 함께 포함하기 때문에 평가 모델링을 통한 실내공기질 예측에 입력변수로 사용 가능하다. 건축자재 분류별 폼알데하이드와 총휘발성유기화합물의 방출강도를 box plot을 이용해 통계적 분석을 하였다. 또한 각 분류별 오염물질의 방출특성을 확인함으로써, 실내공기질을 악화시키는 주된 원인이 되는 건축자재를 확인 할 수 있었다.

• 한국건축시공학회지
• /
• 제6권3호
• /
• pp.123-129
• /
• 2006

In these days, as building structures are getting taller, larger, and more diversified, structural systems with more economy and more efficiency are being required and so are more efficient building materials, this study conducted a basic experiment to conclude an adequate selection of materials and to calculate an optimal mixing proportion of those materials to produce High-strength concrete in a 100MPa of specified concrete strength. And also we conducted an experiment to find out basic properties of this concrete such as slump-flow, strength.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.73-86
• /
• 2012

In this research, the possible applicability of mixture blended with natural, crushed, and recycled fine aggregate are discussed. The fresh and hardened properties of mortar using blended fine aggregates are monitored depending on various blending ratio of fine aggregates. Newly developed ternary diagram was also utilized for better interpretation of the data. It was found that air content increased and unit weight decreased as recycled fine aggregate content increased. With moisture type processing of recycled fine aggregate, the mortar flow was not negatively affected by increase in the recycled fine aggregate content. The ternary diagram is found to be an effective graphical presentation tool that can be used for the quality evaluation of mortar using blended fine aggregate.

• 품질경영학회지
• /
• 제35권4호
• /
• pp.61-66
• /
• 2007

The performance of a building material degrades as time goes by and the failure of the material is often defined as the point at which the performance of the material reaches a pre-specified degraded level. Based on a stochastic deterioration model, a performance based service life prediction method for building materials and components is developed. As a stochastic degradation model, a gamma process is considered and lifetime distribution and service life of a material are predicted using the degradation model. A numerical example is provided to illustrate the use of the proposed service life prediction method.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.189-203
• /
• 2016

This paper investigates on the use of advanced optical measurement methods, i.e. 3D coordinate measurement machines (3D CMM) and stereo-vision digital image correlation (3D DIC), for the mechanical analysis of shear deficient prestressed concrete members. Firstly, the experimental program is elaborated. Secondly, the working principle, experimental setup and corresponding accuracy and precision of the considered optical measurement techniques are reported. A novel way to apply synthesised strain sensor patterns for DIC is introduced. Thirdly, the experimental results are reported and an analysis is made of the structural behaviour based on the gathered experimental data. Both techniques yielded useful and complete data in comparison to traditional mechanical measurement techniques and allowed for the assessment of the mechanical behaviour of the reported test specimens. The identified structural behaviour presented in this paper can be used to optimize design procedure for shear-critical structural concrete members.

• Steel and Composite Structures
• /
• 제16권3호
• /
• pp.289-303
• /
• 2014

In recent, development of construction and design technology gives taller, larger and heavier steel framed structures. With the tendency of increasing high-rise building, this study is strongly related to structural system, one of significant components in structural design. This study presents an innovative structural system, with high performance steel material, diagrid. Its detail, structural analysis, and structural experiments are all included for the development of new structures.

• 태양에너지
• /
• 제11권2호
• /
• pp.20-28
• /
• 1991

본 연구는 상업용 건물에 사용되는 건축재료로서 시중에 시판되고 주로 사용되고 있는 건축재료의 반사지향특성을 파악하기 위한 일환으로 상호반사계산에 따른 조직적인 수치 계산 데이타를 만들었다. 측정은 반사율을 측정하는 실험장치를 이용해서 편광에 의한 표패반사와 층내반사를 분리함으로서 상업용 건축재료의 반사 지향성에 의한 반사지향특성을 고려한 반사율 데이타를 구하였다. 아울러 이 연구는 측정뿐만 아니라 조명설계시 자연채광에 대한 기초적인 자료를 만들고자 분석하였다.