• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.669-676
• /
• 2017

Recently, due to the importance of information security, security vulnerability analysis and various information protection technologies and security systems are being introduced as a countermeasure against cyber-attacks in new as well as existing buildings, and information security studies on high-rise buildings are also being conducted. However, security system introduction and research are generally performed from the viewpoint of general IT systems and security policies, so there is little consideration of the infrastructure of the building. In particular, the BAS or building infrastructure, is a closed system, unlike typical IT systems, but has unique structural features that accommodate open functions. Insufficient understanding of these system structures and functions when establishing a building security policy makes the information security policies for the BAS vulnerable and increases the likelihood that all of the components of the building will be exposed to malicious cyber-attacks via the BAS. In this paper, we propose an architecture reference model that integrates three different levels of BAS structure (from?) different vendors. The architectures derived from this study and the security characteristics and vulnerabilities at each level will contribute to the establishment of security policies that reflect the characteristics of the BAS and the improvement of the safety management of buildings.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.72-80
• /
• 2021

Based on the previous year's statistics, 37% of buildings in South Korea are aged over 30 years. As the number of the aging buildings increases, so does the need for maintenance. Building maintenance involves a significant number of works; the work of 'maintenance manager' accounting for the largest part. Currently, the maintenance history record is mostly in drawing or handwritten form which makes reviewing the data highly time consuming. Therefore, to improve the convenience of maintenance works and optimize historical data management, the existing maintenance process was analyzed. Problems were derived and a smart device-based automation model was established. In order to establish a smart device-based automation model, ① general flow of facility management process was analyzed and related articles were reviewed, ② current maintenance process was optimized, ③ functional block diagram of BIM Data, COBie Data, IoT, and AR-based automated maintenance management model was created, ④ a smart device-based automated maintenance management model was constructed, ⑤ finally, the above system was verified by testing the aforementioned model in the field site, evaluating the time required for the maintenance process and reviewing maintenance history data against the current one.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.313-322
• /
• 2005

Rapid advances in technology and changes in human and cultural activities bring about changes to the earth surface in terms of spatial extension as well as time frame of the changes. Such advances introduce shorter updating frequency of maps and geospatial database. To satisfy these requirements, recent research efforts in the geoinformatics field have been focused on the automation and speeding up of the mapping processes which resulted in products such as the digital photogrammetric workstation, GPSIINS, applications of satellite imagery, automatic feature extraction and the LiDAR system. The possibility of automatically extracting buildings and generating contours from airborne LiDAR data has received much attention because LiDAR data produce promising results. However, compared with the manually derived building footprints using traditional photogrammetric process, more investigation and analysis need to be carried out in terms of accuracy and efficiency. On the other hand, generation of the contours with LiDAR data is more efficient and economical in terms of the quality and accuracy. In this study, the effects of various conditions of the pre-processing phase and the subsequent building extraction and contour generation phases for digital mapping have on the accuracy were investigated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.73-79
• /
• 2020

Building Information Modeling (BIM) tools have not only increased the use of technology in the design process, but also increased the need for more information standard systems. The object classification system consists of 327 types of construction results obtained from 25 kinds of facilities, 174 types of parts, and 207 types of construction parts. In the previous study, the property classification system was developed into 4 major classifications, 13 middle classifications, 58 small classifications (category), and 333 attribution information of roads and rivers. It is extremely difficult to input the property information according to such extensive object classification. In addition, the development of external applications such as Revit plug-ins has created a need to automate specific and repetitive tasks. Therefore, following the BIM property classification system, an attribute input program was implemented for the system to enhance the productivity and convenience of the BIM users.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.97-104
• /
• 2011

This paper deals with the quick and precise disaster prevention automation system (DPAS) based on information communication technology (IT) that detects fire and disasters in the building automatically and quickly and then activates the facilities to extinguish fire and disasters, monitoring such situation in a real time through wire-wireless communication network. The proposed DPAS is applied a programmable logic controller (PLC) of one-chip type which is smallsize and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLC analyzes detected signals from sensors in a case of fire and disasters, then activates fire extinguishing facilities for rapid suppression. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication. The transferred data sounds an emergency alarm signal, and operates a monitoring program. The proposed DPAS based on IT will minimize the life and wealth loss from rapid measures while prevents fire and disasters.

• Journal of Environmental Impact Assessment
• /
• v.26 no.3
• /
• pp.195-206
• /
• 2017

Recently, Discussion about BIM based LID (Low Impact Development) facilities management system is activated because interest of LID technique for urban water cycle restoration is increasing. For this reason, this paper developed the auto-checking module of the BIM (Building Information Model) based supply output table. This module will be the foundation of the BIM based LID facilities total management system. The research order is composed like next follows: (1) Select target area, (2) Make BIM model of LID facilities and extract supply output table, (3) Develop comparison module, (4) Analysis results. As a result, the authors made 27 LID facilities and developed the supply output table comparison automation module. So, the authors could find differences of 2D design documents based supply output table and BIm based supply output table. So, the authors made an improvement suggestion of the design plan and could construct foundation of the BIM based LID facilities total management system.

• KIEAE Journal
• /
• v.3 no.2
• /
• pp.59-66
• /
• 2003

To be the design method supporting aesthetic ability of human, CAAD system should essentially recognize architectural form in the same way of human. In this study, visual perception process of human was analyzed to search proper computational method performing similar step of perception of it. Through the analysis of visual perception, vision was separated to low-level vision and high-level vision. Edge detection and neural network were selected to model after low-level vision and high-level vision. The 24 images of building, tree and landscape were processed by edge detection and trained by neural network. And 24 new images were used to test trained network. The test shows that trained network gives right perception result toward each images with low error rate. This study is on the meaning of artificial intelligence in design process rather than on the design automation strategy through artificial intelligence.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.61-64
• /
• 1999

In this paper, a technique to expand the Input and Output (I/O) of the programmable logic controller (PLC) using remote I/O module is presented. The controller and the remote I/O module should have the same protocol and are interfaced through RS 485. Each remote I/O module consists of 16 digital input and 16 digital output, and the maximum of 32 remote I/O module can be linked to one controller. The remote I/O is programmed for interrupt request to controller independently. Therefore, there is no affect to the scan time of the controller. Using this technique, the PLC can be efficiently applied to the several hundred meters different control points such as the ON-OFF control fur the agriculture farm, the building automation system, a multi group of machine control.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.573-578
• /
• 2009

Survey shows that temperature accounts for 90.6% of dissatisfaction in general hospital environment. In order to improve this situation, operation and thermal data of S hospital collected in 2006 are analyzed. The objective of this study is to find optimum fiducial temperature that minimizes occupants' complaints using 6 sigma method.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.317-318
• /
• 2007

One of the important factors of the autonomous mobile robot is to build a map for surround environment and estimate its localization. This paper suggests a sensor fusion method of laser range finder and monocular vision sensor for the simultaneous localization and map building. The robot observes the comer points in the environment as features using the laser range finder, and extracts the SIFT algorithm with the monocular vision sensor. We verify the improved localization performance of the mobile robot from the experiment.