• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1243-1247
• /
• 1996

In this paper, a small PLC system is designed and developed for the distributed building control and fire control system. It uses 8031, a 8-bit micro controller from Intel Inc. The size of the PLC is $7cm{\times}8cm$ and the PLC can accept 4 sensor inputs and drive 4 relay outputs, which operates at 24V. Multiple access of PLC by one host computer is implemented by assigning a unique 10 to each PLC, which ranges from 0 to 126. The operation starts by sending a command packet from host computer to a PLC and the PLC of the same 10 fetches the command packet by comparing the first byte of the command packet with its own 10. The PLC is programmed to perform a various functions and the function is selected by the content of the command byte, which is the second byte of the command packet. The third byte, which is the last byte, is a checksum byte. The checksum byte is the sum of the first byte and the second byte and is used to detect the communication error. Depending on the content of the command byte, PLC performs the desired function and returns the response packet back to the host computer. The response packet is also a three-byte packet, 10 byte, response byte and checksum byte. For the independent operation of PLC without being controlled by the host computer, variable length RULE data packet is sent to PLC. In case the communication line is broken, the PLC perform the independent operation by referencing the RULE data. The applicable areas are; building automation system, distributed factory automation, measurement of temperature of toxic or dangerous area.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.4
• /
• pp.71-77
• /
• 2008

Earthwork is very equipment-intensive task and researches related to automated excavation have been conducted. There is an issue to secure the safety for an automated excavating system. Therefore, this paper focuses on how to improve safety for semi- or fully-automated backhoe excavation. The primary objective of this research is to develop the core technology for automated object detection in excavation work. In order to satisfy the research objective, a diverse sensing technologies are investigated and analysed in terms of functions, durability, and reliability. The authors developed detecting algorithm for the objects using laser sensor and verified its performance by several tests. The results of this study would be the basis for developing the automated object detection system.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.7 no.1
• /
• pp.23-31
• /
• 2001

In order to improve their hospital services in unlimited competitive situations, the general hospitals, particularly, have since the 1990s been concentrating more on hospital information processing systems and the automation of the patients' convenience. They also give priority to the advance of integrated hospital information systems centred around the patients. Introducing more progressive information technology to already established hospitals, the OPD has been most affected by HIS because there are a lot of patients and doctors. On this background, this study analyse the change of OPD and some related departments around the 1990s with the general hospitals as it's object. It investigates the way of building hospitals and presents some information about the planning of building hospitals.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.2096-2100
• /
• 2008

This research project management, building systems to test the performance requirements of a user to accept the plan and schedule management, personnel management, and test results, and the status of testing and reporting procedures to handle the process of implementation of Java-based X - Under the Internet environment, the default network, remote process research and development program as a test automation, structure and each module of the software analysis, design, analysis and clean-up and structure of the modules, each module and the GUI structure, performance, testing integration DB The present system is to study the system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.177-178
• /
• 2020

In the construction industry, expectations for the Precast Concrete(PC) construction method are rising due to demands for high quality and productivity and social and environmental issues. However, although technical problems that occurred in the early stages of technology introduction have been solved, research related to proper construction management for PC construction methods has been relatively neglected and the advantages of PC construction methods have not been fully utilized. In this study, each group involved in PC works was surveyed to identify important management tasks affecting productivity of PC works to improve PC contruction management system. Based on factor analysis, 22 tasks were calssified into 5 management groups. The results of this study will be used to present a framework for the application of automation and information technology to improve the productivity of PC works.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.17-18
• /
• 2023

This study aims to compare the hardness value development characteristics according to the water-cement ratio during a series of experiments to develop a setting estimator for an AI-based concrete finishing automation system. For the test variables, water-cement ratios are varied with 30, 40 and 50%. Proctor penetration test and surface hardness test by setting time estimator are conducted to estimate the setting time. For the effect of water-cement ratios, they did not affect the surface hardness either, while initial set time and final set time are not constant with water-cement ratios.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.580-581
• /
• 2016

국제적으로 지속적인 이슈가 되고 있는 에너지 절감에 대한 대책으로 다양한 에너지 절감 기술들이 연구 개발되고 있다. 특히 전체 에너지 사용량의 약 20%이상을 차지하는 건물(가정/상업/공공)부문에서는 에너지 진단 및 분석을 수행하기 위해 건물 에너지 관리 시스템(BEMS: Building Energy Management System)과 건물 자동화 시스템(BAS: Building Automation System) 그리고 다양한 환경정보들을 수집하여 활용한다. 하지만 기존 분석 방식은 결과의 신뢰성에 최소한의 영향을 주면서 데이터 관리 효율을 높이는 방법에 초점을 맞춰 연구가 진행되었으며, 이를 위해 기존에 수집된 데이터를 압축하거나 샘플링하는 사전 정제 과정을 거치게 되었다. 하지만 빅데이터 플랫폼을 활용하면 더 이상 신뢰성을 낮추면서까지 데이터를 정제할 필요가 없어지고, 수집되는 모든 데이터에 대한 다차원 분석을 빠르게 수행할 수 있게 된다. 따라서 본 논문에서는 하드웨어의 한계로 기존 건물에너지 진단 및 분석 시스템에서 제공하지 못했던 다양한 분석 및 진단 서비스들을 빠르고 정확하게 제공하도록 하는 빅데이터 플랫폼 기반 건물 에너지 통합 관리 시스템 설계에 대해 서술한다.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.207-212
• /
• 2020

The human centric lighting (HCL) control is a major focus point of the smart lighting system design to provide energy efficient and people mood rhythmic motivation lighting in smart buildings. This paper proposes the HCL control using indoor surveillance camera to improve the human motivation and well-beings in the indoor environments like residential and industrial buildings. In this proposed approach, the indoor surveillance camera video streams are used to predict the day lights and occupancy, occupancy specific emotional features predictions using the advanced computer vision techniques, and this human centric features are transmitted to the smart building light management system. The smart building light management system connected with internet of things (IoT) featured lighting devices and controls the light illumination of the objective human specific lighting devices. The proposed concept experimental model implemented using RGB LED lighting devices connected with IoT features open-source controller in the network along with networked video surveillance solution. The experiment results are verified with custom made automatic lighting control demon application integrated with OpenCV framework based computer vision methods to predict the human centric features and based on the estimated features the lighting illumination level and colors are controlled automatically. The experiment results received from the demon system are analyzed and used for the real-time development of a lighting system control strategy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.280-282
• /
• 2015

This paper proposed Small business owners can use customer contact without additional external assistance professionals and mobile apps, the mobile web, homepage is can automatically create. Automation Platform system combines Single Page Application, cross-platform based native mobile apps, N-Screen based Content building, private cloud based PaaS of construction technology, P2P file sharing and network based multimedia-threaded technology and by automated platform to study how a small business to communicate with customers easily.

• Journal of KIBIM
• /
• v.3 no.3
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.