• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.111-115
• /
• 2008

The productivity is the one of the primary elements to evaluate the new systems performance for building construction along with the economic efficiency, the safety, and the quality improvement. At present the on-site construction automation systems(we will call it as Construction Factory or CF hereafter) is under the development by research group for construction automation of high-rise building. The system includes many sub-systems such as a robotic crane, a construction factory, bolting robots, a building material management system using RFID and so on. In this study we discuss and propose the method to evaluate for these hybrid on-site automation system fundamentally. In future we devise a framework of evaluation modules for the on-site building automation system on the basis of this discuss.

• 대한설비공학회지:설비저널
• /
• 제28권3호
• /
• pp.203-207
• /
• 1999

인텔리전트 빌딩(IB : Intelligent Building)이란 용어가 처음 사용된 것은 1984년 1월에 미국의 코네티컷주 하트포트에 건설된 시티 플레이스(City Place) 빌딩에 빌딩 자동화(BA : Building Automation), 사무 자동화(OA : Office automation), 통신(TC : Tele-Communication) 시스템을 구축한 UTBS(United Technologies Building System)사가 빌딩의 특징을 설명하면서부터였다.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.166-178
• /
• 2000

As the 21st century signifies an information-oriented society, the computer integration takes place in all walks of human presence. Needs for computer and network-integrated automation present new challenges in military as well as commercial facility systems engineering. Since the first intelligent building appeared in USA in 1984, it gradually became an essential capability for the building industry requirement these days. Intelligent Building System(IBS) is evolving to be very complex because there are many subsystems such as telecommunication(TC), office automation(OA), building automation(BA), security, construction environments, etc. During the planing phase of IBS development, therefore, a disciplined systems engineering must be performed to analyze stake- holder's requirements to build an optimized system while minimizing trial-and-error expenses and risks. This paper presents a conceptual design of BAS applying systems engineering methods. The contribution of this study includes the development of IBS subsystem specification for building automation subsystem, which is a part of IBS, using the methodology of requirement analysis, functional analysis, synthesis, and verification. A computer-aided systems engineering s/w, RDD-100, was used to improve the system design efficiency and to promote the product design knowledge management for reuse in later design programs.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.15-16
• /
• 2011

Construction automation and robotics are being taken notice as an alternative to improve productivity and quality. Reflecting on these purpose, automation system, called RCA(Robotic-crane based Construction Automation) system, is developed and have been verified through a pilot project recently in Korea. To apply the RCA system in high-rise building effectively, each management factors of element technologies in the system is derived and assessed critical factor. The purpose of this study, management factors of element techniques, consisted of RCA system, is classified through questionnaires/interviews targeting system developers and construction managers in pilot project site, and critical factors is selected using AHP.

• Architectural research
• /
• 제1권1호
• /
• pp.23-30
• /
• 1999

This research investigates a system for house design automation. The system is based on an object-oriented building data model, aiming to support the house design process conducted by non-expert users. Its object model, with simple yet powerful user interfaces, enables a CAD system to handle a complicated building system with much ease. Hence, the model dramatically simplifies the design process beyond just the automatic document generation. In this paper, we discuss the aspects of the building data model, introduce critical concepts such as grid objects and structured floor plan, and present a prototype system called GPLAN. The system is implemented in the framework of our building data model, and it provides a host of intelligent features that have been proved useful for house design automation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.355-361
• /
• 2002

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires open network with for the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS, a new intelligent control modules with LonTalk protocol and a new control modules for power line communication. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation sub-systems and another BAS with low cost. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.646-651
• /
• 2015

본 논문에서는 일반적인 건물자동제어 시스템의 아키텍처를 네트워크 구성과 관제점, 상호운영성, 성능 측면에서 분석하고, 점대점 고속 유선 방식으로 연결된 가상화 기반의 새로운 건물자동제어 시스템을 제시하였다. 클라우드 컴퓨팅 기반의 건물자동제어 시스템은 사용자 기반의 환경제어를 가능하게 하며 건물자동제어 시스템의 성능 향상을 통하여 건물에너지관리를 효율적으로 수행할 수 있다. 또한, 가상화 방식은 부하관리사업자의 건물 군관리를 효율적으로 수행할 수 있도록 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.496-499
• /
• 2003

System Integration is significant role in building, because it is that the more building system is integrated, the more they can save management costs and energy costs. Nowadays system protocols in building use BACnet, LonWorks, etc. to integrate effectively, but their interoperability is not perfect. Therefore, we propose system integration using Ethernet and TCP/IP for perfect harmony. When data network protocol, Ethernet and TCP/IP is used for control network, there are several problems. But there have been solved by many researches. therefore it is possible that building system integrate to use Ethernet and TCP/IP. Finally, we show that Ethernet and TCP/IP can be used for building automation system integration.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1167-1172
• /
• 2007

The existing building control and automation systems which have been applied to buildings are provided by many different vendors and each vendor has its own proprietary protocol. There are many problems in system integration since those building control and automation systems belong to each vendor. Also, the problems of cost and space increase, due to the usage of personal computers as the control servers of DDC(Direct Digital Control) in each facility. Those problems mentioned above can be effectively resolved by using XML Web Services and Embedded Web Server. Embedded Web Server and XML Web Services are technologies emerging out of the IT industries and there are many researches to apply them into many fields. In this paper, Embedded Web Server and XML Web Services are proposed to be used in building control and automation system to resolve problems in building system integration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.140-141
• /
• 2016

Dynamic nature and diverse requirements on construction sites make the automation technology harder to be employed actively. In this study, we analyzed optimal type of automation system and importance of core technologies for developing efficient construction automation system on 11 construction operations. As a result, it showed that man-machine cooperation system may be the most suitable for most operations, while autonomous robot will be best suited in hard working environment such as maintenance of exterior wall. In elemental technology, ease and accuracy of control and operation showed higher priority than others regardless of automation system type. These findings will provide useful information for developing the construction automation system.