• 한국강구조학회 논문집
• /
• 제21권3호
• /
• pp.245-255
• /
• 2009

산업용 건축물은 일반적으로 박공지붕형 저층의 형태로 많이 건설된다. 본 연구는 박공지붕형 저층건물의 풍압분포와 특성을 알아보기 위하여 풍동실험을 수행하였다. 풍동실험은 경사각 변화에 따른 외장재용 피크외압계수 분포양상을 알아보기 위하여 동일한 폭과 높이, 길이를 가지지만 지붕 경사각이 서로 다른 7가지의 모형을 제작하여 실험하였다. 실험결과 지붕과 벽면의 모서리 부분에서 최대 피크외압계수가 나타났으며, 이를 KBC-2005 및 각국의 기준과 비교하여 보았다. 실험에 의한 피크외압계수는 AIJ-2004와 매우 유사하게 나타났지만 KBC -2005보다는 다소 크게 나타났다.

• 한국측량학회지
• /
• 제18권1호
• /
• pp.51-57
• /
• 2000

레이저 프로파일링 시스템의 등장으로, 기존에는 얻을 수 없었던 도시 지역에 대한 DTM이 취득 가능해졌고, 더욱 정확한 정사투영영상 또한 제작할 수 있게 되었다. 하지만, 높이변화를 보이는 자연지물과 인공구조물이 있는 지역에 대해 기존의 정사투영사진 제작기법이 적용될 때, 폐색이나 이중매핑과 같은 문제가 발생하여 정사투영영상의 품질을 저해하는 주요한 원인이 된다. 따라서, 본 연구에서는 카메라의 외부표정요소와 DTM을 이용하여 폐색영역을 탐지하고, 폐색이 안된 다른 영상의 정보를 통해 폐색영역을 복원하여 더욱 완전한 정사투영영상을 제작할 수 있는 알고리즘을 제안하였다. 제안된 알고리즘에 의해 자연지물이나 인공구조물에 의한 폐색영역을 탐지할 수 있었고 폐색영역의 많은 부분을 부가영상을 이용하여 복원하였다. 건물에 대한 사전지식을 이용하여 폐색영역을 탐지하는 국내 연구가 있지만, 본 연구는 건물에 대한 부가정보나 모델링을 사용하지 않고 DTM과 카메라 외부표정요소만을 이용하여 폐색영역을 탐지한다는 점에서 이러한 연구들과 차별성을 가진다.

• 한국화재소방학회논문지
• /
• 제28권1호
• /
• pp.20-25
• /
• 2014

강구조 건축물의 기둥부재 내화성능은 접합부의 경계조건과 기둥부재의 길이에 따라 변화되지만, 내화성능 평가는 실험장비의 제약과 기술적 요인으로 인하여 힌지단과 3500 mm 길이 조건으로 이루어지고 있다. 그러나 실제 강구조물에 적용되는 기둥부재는 부지조건과 설계조건에 따라 다양한 경계조건과 길이의 변화를 가져올 수 있으며, 이에 대한 내화성능의 평가는 대상으로 고온 시의 재료특성과 해석적 이론을 바탕으로 고온 시 구조적 성능을 평가하여, 경계조건과 길이 변화에 따른 내화성능의 기본 자료를 도출하였다.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.191-199
• /
• 2017

PURPOSES : The objective of this study is to develop a methodology to estimate the minimum required separation distance (MRSD) between a vehicle and a bicycle when overtaking. METHODS : Three steps have been conducted to develop a methodology to estimate MSRD. First, a literature review has been conducted on the measurement of MSRD, and how it may be applied in Korea. Second, two assumptions have been made to develop a methodology to estimate the MSRD. The first assumption is that the maximum separation distance between a vehicle and a bicycle can be observed when they are at the same location longitudinally. In addition, it is assumed that the separation distance is invalid when the contra-flow exists. Finally, three cameras were installed at a height of 10 m to record the vehicle-bicycle interaction. Moreover, the vehicle trajectories as well as the separation distance were coded and analyzed. Through the hypothesis test and the interval estimation, the sample mean was tested and the confidence interval was estimated. RESULTS : 141 records of separation distance data were collected, and the hypothesis test demonstrated that the MSRD in Korea is significantly higher than other countries. In addition, the confidence interval of the population mean of MSRD is from 1.51 m to 1.65 m with 95% level of confidence. CONCLUSIONS : It is expected that the proposed methodology to estimate MSRD would be beneficial in studying road safety of vehicles and bicycles. Also, the proposed MSRD is expected to be designated in the act of road and transportation.

• 에너지공학
• /
• 제1권1호
• /
• pp.66-75
• /
• 1992

이중창의 열전달 성능을 수치해석과 실험적 방법을 통하여 조사하였다. 이중창 사이의 간격이 0.5cm에서 10cm사이의 실제적인 범위에서 이중창 사이의 간격이 작을 때에는 전도에 의한 열전달이 두드러졌으며 이중창 사이의 간격이 넓어지고 Rayleigh 수가 높은 영역에서는 대류에 의한 열전달이 크게 나타나 이중창 간격이 넓어진 이점을 크게 상쇄시켰다. 이와 같은 이중창 단열문제에 대한 보완책으로 이중창 중앙에 하나의 유리창을 더 설치한 3중창 경우에 대해 대류열전달 감소효과와 복사열차폐(radiation shield) 효과를 검토하였으며 또한 이중창 중간 높이에 스페이서(spacer)를 설치하여 대류유동 강도를 줄이는 방안 등에 대한 분석이 이루어졌다. 3중창을 사용한 경우에는 이중창에 비해 30-50%, 이중창에 스페이서를 설치한 경우에는 l0% 정도의 에너지 절약 효과를 기대할 수 있다.

• Ecology and Resilient Infrastructure
• /
• 제6권4호
• /
• pp.258-266
• /
• 2019

이 연구는 자연에 기반을 둔 하천기술을 제방에 적용하여 그 효과를 평가하기 위해 수행되었다. 친환경 신소재 바이오폴리머를 제체 표면에 적용하여 내구성과 친환경성을 증진시킴과 동시에 월류에 대응하기 위한 제방의 보강 대책을 수립하고자 하였다. 안동하천연구센터에 현장토를 사용하여 높이 1 m, 마루 폭 3 m, 사면경사 1:2, 총 길이 5 m의 중규모 제방모형을 제작하였으며, 바이오폴리머와 흙을 적정 비율로 혼합한 바이오-소일 (bio-soil)을 제방 전면에 5 cm 두께로 도포하여 월류 발생에 대한 제방의 안정성 평가 실험을 수행하였다. 영상분석 프로그램을 이용한 픽셀기반 분석 기법을 적용하여 시간에 따른 제방사면의 붕괴면적을 산정하였으며 그 결과, 신소재 적용 제방의 경우 완전붕괴가 발생하는 시간은 일반 흙 제방에 비해 12배 이상 증가해서 붕괴지연효과가 상당히 높은 것으로 나타났다.

• 대한가정학회지
• /
• 제37권3호
• /
• pp.175-191
• /
• 1999

The purpose of this study was to investigate the eating behavior and life habits of kindergarten children 5 to 7 years old in Chuncheon area. This study was conducted in December, 1996. Anthropometric indices(height, weight, skinfold thickness, mid-arm circumference) were measured and body mass index(BMI), Rohrer index, arm fat area were calculated to estimate children’s body fatness. Also the eating behavior and life habits were determined tv using questionnaire method. The results were as follows: Body fat rate of the children was almost normal according to Rohrer index and BMI. There was significant difference in birth weight between male and female. The problems of the eating behavior were frequent skipping breakfast and eating-out. The rate of the children who took snacks 2 times a day was 46.9％. Most children tended to take sweet snacks such as ice-cream, chocolates, cookies, and they tended to prefer meats and fishes to vegetables. The rate of breast feeding was 28.3％ and the rate of weaning foods prepared at home was 61.1%. Many children preferred indoor activities such as watching TV, toy furniture play, building block to outdoor activities such as roller-skating, cycling, jogging in their spare time. The rate of the children who took exercise regularly was 15％. Children tended to eat kimbap, fried chicken, ramyeon more frequently in various instant foods. The intake rates of fruit juice and barly tea were relatively high and children's favorite fruits were watermelon and mandarin orange. From this results, skipping breakfast, frequent eating-out and the monotony of food preference appears to cause imbalance in nutrient intakes of the children and to have bad influence on children’s health. Accodgingiy, the comprehensive nutrition education and proper modification program should be needed for the children and their parents to correct the eating behavior and life habits. The reasonable exercise programs are needed to motivate outdoor activities of the children, and the importance of breast feeding and weaning foods should be emphasized to lactating women and pregnant women.

• 한국태양에너지학회 논문집
• /
• 제27권2호
• /
• pp.111-119
• /
• 2007

The annual mean temperature of South Korea has risen by $1.3^{\circ}C$ for last 100 years by urbanization and industrialization. Especially, the frequency of unusual hot weather in summer increases for a long time and the frequency of unusual cold weather in winter clearly decreases. In recently, The considerable portion of curtain wall system is appled to building skin in domestic. As related to this, the Korea Institute of Construction Technology devised the box typed double skin facade(It is occasionally called as FDFS : Functional Double Facade System) as an alternative that reflects the distinctive local climate and saves cooling energy. Two mock-ups($49m^*4.9m$) applied to single skin(curtain wall) and double skin each were monitored under the outdoor condition. Therefore, the characteristics of natural ventilation and cooling energy consumption of each window had been analyzed in real time. The results of this study are summarized as follow, Analysis of the experiment on an air conditioner: the indoor temperature of the chamber with FDFS is lower than that of the chamber with single skin facades by $3{\sim}6$ degrees(C). A temperature variation of about $1{\sim}2$ degrees between the 0.2m and 1.7m height of the mock-up occurs in FDFS, while that of about maximum 7 degrees occurs in single skin facade at noon with abundant intensity of solar accident. Also, 67 percent of energy consumption for air conditioning has been saved.

• 국제초고층학회논문집
• /
• 제9권3호
• /
• pp.273-282
• /
• 2020

An innovative high-rise timber-concrete hybrid structure was proposed in previous research, which is composed of the concrete frame-tube structure and the prefabricated timber modules as main structure and substructures, respectively. Considering that the timber substructures are built on the concrete floors at a different height, the floor response spectrum is more effective in estimating the seismic response of substructures. In this paper, the floor response spectra of the hybrid structure with different structural parameters were calculated using dynamic time-history analysis. Firstly, one simplified model that can well predict the seismic response of the hybrid structure was proposed and validated. Then the construction site, the mass ratio and the frequency ratio of the main-sub structure, and the damping ratio of the substructures were discussed. The results demonstrate that the peaks of the floor response spectra usually occur near the vibration periods of the whole structure, among which the first two peaks stand out; In most cases, the acceleration amplification effect on substructures tends to be more evident when the construction site is farther from the fault rupture; On the other hand, the acceleration response of substructures can be effectively reduced with an appropriate increase in the mass ratio of the main-sub structure and the damping ratio of the substructures; However, the frequency ratio of the main-sub structure has no discernible effect on the floor response spectra. This study investigates the characteristics of the floor response spectrum of the novel timber-concrete structure, which supports the future applications of such hybrid structure in high-rise buildings.

• 한국태양에너지학회 논문집
• /
• 제33권1호
• /
• pp.89-95
• /
• 2013

A DBLP(Double blind light pipe) daylight system can be installed at a building exterior wall or roof to replace artificial light during the day time. This system was consisted of a double blind light collector, a mirror duct type light transformer and a prism light pipe distributor. The double blinds were used to track the sun's altitude and azimuth movements to collect the sunlight throughout the day. The sunlight collected by the light collector was reflected on the first mirror and the second mirror and sent to the light pipe through the light transformer. The transformer was designed to deliver the sunlight into the light pipe efficiently. The light distributor plays a role in diffusing the sunlight coming in through the light collector to be used for indoor lighting. In this paper, a DBLP system has been designed, installed and tested at a KIER daylighting twin test cell. The DBLP daylighting system was applied to the experimental test cell which has an indoor area of 2.0 m wide ${\times}$ 2.4 m height ${\times}$ 3.8 m length. The experiment was conducted from January 30 to February 27, 2012, under clear skies and partially cloudy skies. Data was collected from 10:00 am to 16:00 pm every 2 minute and the average was calculated for every 30 minute of the data collection to obtain the system efficiency. The results indicated that the DBLP system efficiency was evaluated as 11.67%. The DBLP system indoor illumination energy reduction was predicted as 0.822 kWh/day. This could replace 4 sets of a 32W fluorescent lamp operating 6.4 hours per a day.