• Journal of Construction Engineering and Project Management
• /
• 제4권3호
• /
• pp.47-52
• /
• 2014

In the last decades, Facility Management (FM) has established itself as a key building service factor.FM includes supporting services and organizing functions essential for maintaining, operating and managing physical component and material. The purpose of the paper is to develop an economical analysis for building facilities management during its service life based on limited cost. This method helps to facilities managers and engineers to make better decisions for reducing of facilities assessment costs and increasing the facilities' service life. This paper presents the preliminary development of a model involves three stages process namely data collection, economic computation and economic process optimization. This process was tested for fiberglass doors example in a building interior and exterior system. If executives can manage essential points effectively and make decisions according to a key performance index, cost can be optimized and safety can be enhanced for installation building.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.177-181
• /
• 2008

Recently, amount of High-Rise Mixed-use Building is Increasing based on Preference of comfortable residence and good view. Government policies were turned to prefer about High-Rise Mixed-use Building because of decreased real estate Condition. But these changes have revealed that it has many maintenance problems for example- efficiency, economic, environmental problems. This paper suggests that the Database System based on various alternatives and real case. And it will be a tool in the scientific decision and value analysis from the facility management to make optimized decision.

• 한국태양에너지학회 논문집
• /
• 제22권2호
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.190-191
• /
• 2014

The building insulation materials shall keep their thermal conductivity constant even when the freezing and thawing repeats for over a long time. But, in this condition of repeated freezing and thawing, the organic building insulation material may suffer the degradation in the thermal performance as the gas put into the insulation materials gets out slowly over a long time. Accordingly, in this study, the change in the thermal performance has been tested and evaluated when the repeated freezing and thawing cycles happen.

• 한국지리정보학회지
• /
• 제20권1호
• /
• pp.137-151
• /
• 2017

도시표면의 건물정보는 빗물의 유출경로이며 또한 격자기반의 수치해석을 위한 빗물흐름과 건물 외곽을 구분하는 경계조건에 해당한다. 경계조건인 건물자료의 왜곡 최소화는 수치해석 결과의 사실성 확보를 위한 필수적 과정이다. 격자기반의 래스터 전환은 건물자료의 왜곡을 유발하기 때문에 왜곡의 정도를 완화시키기 위한 전처리로 건물 일반화가 필요하다. 본 연구의 목적은 건물 일반화가 일반주거지역의 빗물 유출경로 연속성에 미치는 영향을 분석하고 적정한 일반화 임계값과 수치해석 격자크기를 제시하고자 한다. 빗물 유출경로 연결성 평가를 위한 설명변수로는 일반화 임계값과 수치계산 격자크기를 사용하는 한편 종속변수로는 격자망의 단절 개수와 단절면적을 사용했다. 적정한 격자크기와 일반화 임계값 선정은 임의 격자크기와 임계값을 적용한 일반화 결과로부터 산출된 건물 면적 변화율과 단절 면적 변화율 각각을 비교하고 크기가 가장 낮은 것으로 하였다. 적정 임계값과 격자크기 범위는 각각 3m와 $5{\times}5m{\sim}10{\times}10m$ 이었다. 이를 적용한 결과 건물면적 증가율은 5%이하 그리고 단절면적 감소율은 94.4%이상이었다. 대상지 토지용도를 구분한 건물 일반화 모의 결과, 아파트 단지인 3종의 건물면적과 빗물 유출경로 연결성은 임계값 10m이하에서 크게 변하지 않았다. 한편 개별 주택인 2종 지역에서는 임계값 3m와 격자크기 $5{\times}5m$을 적용한 모의결과는 단절면적의 감소와 양호한 유출경로 연결성을 보였다.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.969-976
• /
• 2004

Building energy saving is one of the most important issues in these days. Energy saving control strategies should be developed properly to achieve the saving. One of such area we could apply is the HVAC (Heating, Ventilation and Air-Conditioning) system. Through the optimal control algorithm for building energy management system (EMS), you can not only save the cost of building energy, but also protect HVAC system components against the unexpected condition. In order to verify the effectiveness of building energy saving, field test was accomplished for several months at 'A' building. And to get the measured data, remote control was used. If the remote control is used in BAS (Building Automation System), control and monitoring can be done for all of the building systems, such as HVAC, power, lighting, security and fire-alarm etc. anywhere any time. Using the remote control, Control and monitoring is possible for the testing system without going there. As the results of field test, we could reduce $5{\sim}10\%$ of the building energy cost.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.903-908
• /
• 2006

Building energy simulation has become a useful tool for predicting cooling, heating and air-conditioning loads for facilities. It is important to provide building energy performances feed back to the mechanical and electrical system operator and engineer for energy conservation and maintenance of building. From this research, we set up the typical weather data of location, basic description of building, geometric modelling data and the specification of Installed primary HVAC system for establishing the simulation model about energy consuming that take place in multipurpose building complex. The simulation tool of building energy - EnergyPlus (DOE and BLAST based simulation S/W), it has been used and accomplished calculations and analyses for evaluating the effect of the system types and operating condition of central HVAC plant on the building energy consumption. In this paper, we offer comparison and simultaneous results those involve electricity consumption pattern and amount between actual operation versus EnergyPlus simulation to the object building during summer season.

• 한국환경보건학회지
• /
• 제38권1호
• /
• pp.66-72
• /
• 2012

Objectives: The AHERA method by the US EPA, ASTM E2356-04, and HSG264 by the UK HSE, all of which are hazard/risk assessment methods for asbestos-containing building materials, were reviewed and compared based on 231 homogeneous areas. In addition, the current Act on Asbestos Safety Management (enforcement: April 29, 2012) was reviewed and analyzed. This trial provided fundamental data for improving the current asbestos hazard/risk assessment method. Methods: For the hazard/risk assessment of 77 asbestos-containing public buildings including schools, 231 homogeneous areas were selected, each of which was assessed using AHERA, ASTM E2356-04, and HSG264. Results: The matching rate of the hazard/risk assessment stood at 20.4 percent between AHERA and ASTM, at 71.4 percent between AHERA and HSG264 and at 17.8 percent between ASTM and HSG264. The AHERA method includes a seven-category rating scale. There were three categories, two of which have three subcategories. ASTM provides two decision-making charts consisting of ten rating scales for current condition estimation and for potential for disturbance estimation. In addition, the HSG264 method has a total of 20 scores with four items, and then provides four grades. This HSG264 method cannot clearly separate current condition and potential for disturbance. Conclusions: In the Korean Act on Asbestos Safety Management, the hazard/risk assessment method for asbestos-containing building materials should consider balance between current condition estimation and the potential for disturbance estimation.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.56-62
• /
• 1990

This study is conducted to analyze exact causes of occupational fatalities and results are as follows ： 1) The number of fatalities in establislment which employed less than 50 workers is 605(40.1％ ). Age of sixties and seventies is occupied by 10 percent with there being old-aged trend. Fatal workers who were employed less than 3 months are 39.5 percent and fatal workers who were employed more than 10 years are 11.9 percent. Safety training is necessary for newly recruited and long employed workers. 2) Accident type is, in sequence, fall from elevation, traffic accident, disease, contact with electric current, and hazardous condition is, in order, inadequate guard, hazardous method or procedure, public hazard, and agency of accident is, in sequence, temporary structure/building/structure, powered transport vehicle, passenger vehicle, hoisting or lifting apparatus, and unsafe act is, in order, driving error, failure to secure or warn. 3) The results of cross-tabulation for hazardous condition and accident type is, in sequence, traffic accident by public hazard, fall from elevation by hazardous method or procedure, fall from elevation as well as contact with elctric current by inadequate guard. The result of cross-tabulation for agency of accident and accident type is, in order, fall from elevation by temporary structure/building/structure, traffic accident of passenger vehicle and powered transport vehicle, contact with electric apparatus. The result of cross-tabulation for agency of accident and hazardous condition is, in sequence, public hazard of passenger vehicle, hazardous method or procedure of temporary structure/building/structure, publit hazard of powered transport vehicle, inadequate guard of temporary structure/building/structure. The result of cross-tabulation for unsafe act and accident type is, in sequence, traffic accident by driving error, fall from elevation by inattention to footing or surrounding, contact with electric current by secure or warn.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.85-91
• /
• 2021

건축시설물 중 제1종 시설물과 제2종 시설물은 유지관리를 위해 정기적으로 정밀안전점검과 정밀안전진단을 실시한다. 건축물의 점검 및 진단을 실시하는 경우 상태평가, 기울기 및 침하, 안전성평가를 종합하여 건축물의 등급이 결정된다. 그리고 평가등급은 점검 및 진단의 주기를 결정한다. 평가 등급이 좋지 않다면 점검 및 진단 주기는 짧아지고, 이로 인한 유지관리 비용은 증가하게 된다. 따라서 건축물을 평가하는 방법은 명확하여야 한다. 상태평가는 부재단위 평가, 층단위 평가, 종합 평가로 이루어진다. 이 중 부재단위 평가는 현장조사와 시험 결과를 통해 등급을 판정한다. 본 연구에서는 상태평가의 첫 번째 단계인 부재단위 평가에 대해 평가방법과 평가기준을 분석하여 개선점을 도출하였으며, 이를 개선하여 현재 부재의 상태점수를 반영할 수 있는 함수식을 제시하였다.