• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.141-146
• /
• 2002

AIN CS-3를 기반으로 하는 IMT-2000 망은 지능망의 구성 요소들과 통합 및 연동을 통하여 기존에 개발되었거나 앞으로 개발될 유선 지능망의 서비스들을 쉽게 수용할 수 있게 된다. 본 논문에서는 IMT-2000 및 IMT-2000과 연동되는 타 네트워크의 상이한 플랫폼 환경의 개발환경 및 향후 유지보수과정에서 발생 할 것으로 예측되는 TMN 시스템 내 에이전트의 Q3 인터페이스 구현상의 표준을 이룰 수 없다는 등의 문제점을 해결하기 위하여 I-Farmer 모델 및 I-Farmer 방법론을 제안하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.229-230
• /
• 2016

The Nuclear Power Plant construction industry has the related to Information-integration field. In this study, the end user developed an Information Management System early in the project, and developed a management structure that systematically integrates and interfaces with information in each life-cycle phase. Particularly this paper related to the construction information of component.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.857-862
• /
• 2008

Window is the most demanding design component in the building design. Recently, window area in the building surface has been increased significantly in the office building. As window area increased significantly, however, the thermal load has been increased significantly due to lack of thermal performance of the outside wall. In this paper, we discussed the energy consumption of the buildings according to window area ratio. Two types of building for energy consumption analysis were made by Designbuilder v.1.4 and Energyplus v.2.0. Window area ratio was five different types ($30%{\sim}70%$) in each building. As a result, the cooling energy consumption has been decreased as window area decreased in each building. Whereas the heating energy consumption has been increased window area decreased.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.491-500
• /
• 2004

As the applications of 3D GIS rapidly increase, the need for acquisition and continuos update of urban models is increasingly emphasized. Particularly, building models has been considered as the most crucial component of urban models. Many researchers thus have focused on building extraction from mainly aerial photos or airborne LIDAR data but so far mostly failed to achieve satisfactory results in terms of both completeness and precision because of the intrinsic limitation of the sensory data themselves. Therefore, instead of the airborne sensors, we utilize a terrestrial LIDAR to generate precise and complete building models. This paper presents the overview of the sensors for data acquisition, describes data processing methods for building modelling from the acquired data and summerizes the experimental results.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.89-97
• /
• 2005

Application of proper orthogonal decomposition (POD) and continuous wavelet transform (CWT) is introduced to study wind speed and building roof pressures of flow separation region. In this study, a detailed analysis of the approach wind flow, wind-induced building pressure and the relation between the two fields was carried out using the POD technique and CWT analysis. The results show potential of the application of POD and CWT in characterization of spatio-temporal and spectral properties of the approach wind and its induced dynamic pressure events. Some of findings resulting from the application of this analysis can be summarized as follows: (1) The POD first principal coordinate of the roof pressure in the separated shear layer is closely correlated with the longitudinal component of oncoming flow. (2) The CWT analysis suggests that the extreme peak pressure in the separated shear layer is due to condensed large-scale eddy motions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.13-14
• /
• 2011

The main purpose of this research is to propose standardization of construction components design with BIM and to develop WLCM Framework and Application System for supply chain management on interaction of stakeholders based on proposed standard component. To accomplish main purpose of this research, we planned three years period, in first year, we will develop model for building lifecycle based on BIM, and this model can give the chance of collaboration with stakeholders of building project. In second year, we will develop WLCM system with model, and to improve performance of application model/system. This study can contribute on reduction of whole lifecycle cost, with preventing omission of factors on cost reduction possibility, develop concurrent engineering framework for construction stakeholders with proposed BIM.

• Solar Energy
• /
• v.11 no.2
• /
• pp.20-28
• /
• 1991

The purpose of this paper is found consistent mathematical data of Inter-reflection of calculation as a mean to grasp characteristics reflex of building materials that primarily uses in Building, and that comes in to the market. The measurement of directional characteristics of non-metallic Building Materials is based on seperation measurement of Boundary Reflected and Layer Reflected component using a Reflectmeter with Polarized. And this study analyzed with not only experiment but simulation to furnish basic data for illumination design to daylighting.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.807-813
• /
• 2006

The objective of this study is to develop a rule-based fault detection algorithm and an experimental verification using an artificial air handling unit. To develop an analytical algorithm which precisely detects a tendency of faulty component, energy equations at each control volume of AHU were applied. An experimental verification was conducted on the HVAC simulator. The rule based FDD algorithm isolated a faulted sensor from HVAC components in summer and winter conditions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.211-223
• /
• 2005

The current software development type is based on CBD (Component Based Development). However, it requires a new component model that can support rapid and accurate component information on the web due to the cost increase of building new components using CBD. The purposed of this paper is to promptly develop an application on the web which fulfills users' demand and to provide specific interface regarding the small scales of distributed component in business domains. The e-BCOS(e-Business Component System) is the agent system for the users to register distributed components and to search component information, which would increase reusability through the e-business component development of distributed components in business domains and help the users understand the information about the component. Moreover, XML is employed for specification which allows smooth specification sharing and delivery to satisfy users' variable demands.

• Architectural research
• /
• v.13 no.3
• /
• pp.11-18
• /
• 2011

With the rapid development of computer technology and ongoing destruction of traditional buildings, more and more attention is paid to digital methods for the design and preservation of traditional buildings. Unlike 2D methods, Building Information Modeling (BIM) provides an object-oriented and parametric digital representation way for traditional building components. However, one of the main limitations currently is that parametric information cannot be exchanged between BIM software packages. Therefore each kind of software must have their own parametric library which causes extensive works. In this research, the authors developed an open BIM-based library using an XML parametric approach to solve the above problems, represented traditional components according to an XML schema, and parametrically implemented these XML files in a browser which can be accessed by users for their easy component edit and selection. And then based on the XML file of one component, implemented an Add-on in ArchiCAD for users to parametrically edit and directly utilize. Thus based on these XML files, a browser for users' view and selection purpose and an add-on for users' application purpose were developed. Future research will focus on implementing these XML files in other BIM tools like Revit and Digital Project. If the whole library was to be completed based on this XML approach, an open BIM-based library would be established that all kinds of BIM software users could apply this parametric library for easy modeling of traditional houses.