• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.27-32
• /
• 1997

Continual monitoring of abnormal operating conditions i a key issue in maintaining high product quality and safe operation, since the undetected process abnormality may lead to the undesirable operations, finally producing low quality products, or breakdown of equipment. The statistical projection method recently highlighted has the advantage of easily building reference model with the historical measurement data in the statistically in-control state and not requiring any detailed mathematical model or knowledge-base of process. As the complexity of process increases, however, we have more measurement variables and recycle streams. This situation may not only result in the frequent occurrence of process Perturbation, but make it difficult to pinpoint trouble-making causes or at most assignable source unit due to the confusing candidates. Consequently, an ad hoc skill to monitor and diagnose in plat-wide scale is needed. In this paper, we propose a hierarchical plant-wide monitoring methodology based on hierarchical decomposition and principal component analysis for handling the complexity and interactions among process units. This have the effect of preventing special events in a specific sub-block from propagating to other sub-blocks or at least delaying the transfer of undesired state, and so make it possible to quickly detect and diagnose the process malfunctions. To prove the performance of the proposed methodology, we simulate the Tennessee Eastman benchmark process which is operated continuously with 41 measurement variables of five major units. Simulation results have shown that the proposed methodology offers a fast and reliable monitoring and diagnosis for a large scale chemical plant.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.181-190
• /
• 2005

The time required for airport process is considered more important as the airports are becoming bigger. International Civil Aviation Organization mattes this international standards and recommends not to exceed it. The passenger forecasting model is developed to predict the number of passengers at the check-in counter, and the area of formalities for departure and entry. In case of forecasting the number of outbound-passengers. the patterns of show-up lead time(SLT) at the check-in counter and lag time from check-in counter to the area of departure formalities are modeled in terms of time. On the other hand, the matter of the choice of check-in counters and areas of departure formalities are modeled in terms of space. In case of forecasting the number of inbound-passengers and transfer passengers, the time of airplane movement from arrival to block on at the gate and the time of passengers required from gate to the area of formalities for entry are modeled in terms of time. While the matter of the choice of gates and the areas of formalities for entry are modeled in terms of space. The average error of forecasting outbound-passengers and inbound-passengers is respectively 15% and 10%, which are considered excellent with the 5% error of passenger reservation information as input data. Through the development of passenger forecasting models, we assure we could provide passengers with valuable service because we allocate resource such as employees and equipments according to the degree of concentration of passengers.

• Journal of Engineering Education Research
• /
• v.6 no.2
• /
• pp.22-29
• /
• 2003

The ultimate goal of a hardware design course is to equip the students with the system design ability. However, the majority of the current structures of the design courses are focused on the understanding of the operational principles of each device which is used later as a building block for the design of a system. The shortcomings of this approach are, first, that it is very hard to keep the students motivated to the end of the course where system design concepts are dealt, and, second, the students do not have enough experience of the system design which is usually required in the field. As an alternative to solve these problems, it is necessary to reverse the order of contents of the course. Namely we introduce the high level of the abstract concept of the system design in the very beginning of the course and later by lowering the level of abstraction to the operational principle of the internal devices. In this paper, we propose a new top-down methodology for the introductory hardware design course of logic design, where the design expression and verification in the system-level are introduced first and then detail knowledge on each device is introduced later. Also, we report a case result from a student's working group as part of an extracurricular education in order to verify the validity of our proposed approach

• Journal of Astronomy and Space Sciences
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2007

The international EARTHSHINE mission is to measure 1% anomaly of the Earth global albedo and total solar irradiance using Amon-Ra instrument around Lagrange point 1. We developed a new ray truing based integrated end-to-end simulation tool that overcomes the shortcomings of the existing end-to-end performance simulation techniques. We then studied the in-orbit radiometric performance of the breadboard Anon-Ra visible channel optical system. The TSI variation and the Earth albedo anomaly, reported elsewhere, were used as the key input variables in the simulation. The output flux at the instrument focal plane confirms that the integrated ray tracing based end-to-end science simulation delivers the correct level of incident power to the Amon-Ra instrument well within the required measurement error budget of better than ${\pm}0.28%$. Using the global angular distribution model (ADM), the incident flux is then used to estimate the Earth global albedo and the TSI variation, confirming the validity of the primary science cases at the L1 halo orbit. These results imply that the integrated end-to-end ray tracing technique, reported here, can serve as an effective and powerful building block of the on-line science analysis tool in support of the international EARTHSHINE mission currently being developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7287-7291
• /
• 2014

A CDTA (current differencing transconductance amplifier) is an active building block for current mode analog signal processing with the advantages of high linearity and a wide frequency bandwidth. In addition, it can generate a stable voltage because all the differencing input current flows to the grounded devices. In this paper, a new small signal equivalent circuit is proposed to analyze a CDTA. The proposed small signal equivalent circuit provides greater precision in analyzing the magnitude and frequency response than its previous counterparts because it considers the parasitic components of the input, internal and output terminal. In addition, observations of the changes made in various devices, such as the resistor (Rz) confirmed that those devices heavily influence the characteristics of CDTA. The designed parameters of the proposed small signal equivalent circuit of the CDTA provides convenience and accuracy in the further design of analog integrated circuits. For verification purposes, a 2.5 MHz low pass filter was designed on the HSPICE simulation program using the proposed small signal equivalent circuit of CDTA.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.55-62
• /
• 2015

Cracking is an inevitable fact of asphalt concrete pavements and plays a major role in pavement deterioration. Pavement cracking is one of the main factors determining the frequency and method of repair. Cracks can be treated with a number of preventative maintenance actions, including overlay surface treatments such as slurry sealing, crack sealing, or crack filling. Pavement cracks can show up as one or all of the following types: transverse, longitudinal, fatigue, block, reflective, edge, and slippage. Crack sealing is a frequently used pavement maintenance treatment because it significantly extends the pavement service life. However, crack sealant often fails prematurely due to a loss of adhesion. Because current test methods are mostly empirical and only provide a qualitative measure of the bond strength, they cannot accurately predict the adhesive failure of the sealant. This study introduces a laboratory test aimed at assessing the bonding of hot-poured crack sealant to the walls of pavement cracks. A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the bonding strength of the hot-poured crack sealant as a function of the curing time and temperature. Based on a limited number of test results, the hot-poured crack sealants have very different bonding performances. Therefore, this test method can be proposed as part of a newly developed performance-based standard specification for hot-poured crack sealants for use in the future. PURPOSES : The purpose of this study was to evaluate both the adhesion and failure performance of a crack sealant as a function of its curing time and curing temperature. METHODS: A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the adhesion performance of a crack sealant as a function of the curing time and curing temperature. RESULTS: With changes in the curing time, curing temperature, and sealant type, the bond strengths were found to be significantly different. Also, higher bond strengths were measured at lower temperatures. Different sealant types produced completely different bond strengths and failure behaviors. CONCLUSIONS: The bonding strength of an evaluated crack sealant was shown to differ depending on various factors. Two sealant types, which were composed of different raw materials, were shown to perform differently. The newly proposed test offers the possibility of evaluating and differentiating between different crack sealants. Based on alimited number of test results, this test method can be proposed as part of a newly developed performance-based standard specification for crack sealants or as part of a guideline for the selection of hot-poured crack sealant in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.121-128
• /
• 2003

Acoustic Echo Cancellation(m) is very active research topic having many applications like teleconference and hands-free communication and it employs Double Talk Detector(DTD) to indicate whether the near-end speaker is active or not. However. the DTD is very sensitive to the variation of acoustical environment and it sometimes provides wrong information about the near-end speaker. In this paper, we are focusing on the development of robust DTD algorithm which is a basic building block for reliable AEC system. The proposed AEC system consists of delayless subband AEC and narrow-band DTD. Delayless subband AEC has proven to have excellent performance of echo cancellation with a low complexity and high convergence speed. In addition, it solves the signal delay problem in the existing subband AEC. On the other hand, the proposed narrowband DTD is operating on low frequency subband. It can take most advantages from the narrow subband such as a low computational complexity due to the down-sampling and the reliable DTD decision making procedure because of the low-frequency nature of the subband signal. From the simulation results of the proposed narrowband DTD and wideband DTD, we confirm that the proposed DTD outperforms the wideband DTD in a sense of removing possible false decision making about the near-end speaker activity.

• Journal of architectural history
• /
• v.12 no.4 s.36
• /
• pp.7-26
• /
• 2003

This article works on the development process of the Buddhist Temple with two pagodas in the Eastern Asia. in 7-8th centuries. This study was motivated from the observation that why there are many the Buddhist Temple having two pagodas only around the late 7th century, roughly around 670 A.D.. This period corresponds to the Silla Dynasty(in Korean History) and Hakuho Period(in Japan History) among the Eastern Asia while the composition of the temple being changed as Buddhism spreads out from China. The results of this study are the followings. The appearance of the Buddhist Temple having two pagodas was resulted from the representation of the Ideology in Botabpum(dogma of pagoda security) of the Saddharmapundarika Sutra, that is to say, two Buddhas sit side by side and iconography of Esoteric Buddhism dogma supports the spirit for defending one's country. Buddhist Temple having two pagodas in China had separate tab-won(areas with pagodas outer temple building block). Buddhist Temple having two pagodas in Korea had begun with sacheunwangsa temple in Unified-Silla. But it had two pagodas with inner temple area instead of outer. This was different from the composition of China. It can be related to the layout of the temple haying two pagodas in East-Jin(in China History) and the sculpture of two pagodas in Ungang-stonecave(in China). Thus the layout of the Buddhist Temple having two pagodas in Silla had been originated from that of China, but was developed to the main temple layout on her own accord. As Japanese Temple having two pagodas had been influenced diplomatically, it had two pagodas inner area as like the layout in Shilla. But later under the influence of Tang it was modified to the layout having them in separate area. And this influence can be seen for example Tangchojaesa temple. For the more, We call see that the diplomatic trends according to the policies in East asia affected to Buddhism and then naturally also to the layout of the Buddhist Temple.

• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.117-140
• /
• 1991

The purpose of this paper is primarily to introduce a nonparametric statistical tool developed by Baek and Brock to detect a unidirectional causal ordering between two economic variables and apply it to interesting macroeconomic relationships among money, production and prices. It can be applied to any other causal structure, for instance, defense spending and economic performance, stock market index and market interest rates etc. A key building block of the test for nonlinear Granger causality used in this paper is the correlation. The main emphasis is put on nonlinear causal structure rather than a linear one because the conventional F-test provides high power against the linear causal relationship. Based on asymptotic normality of our test statistic, the nonlinear causality test is finally derived. Size of the test is reported for some parameters. When it is applied to a money, production and prices model, some evidences of nonlinear causality are found by the corrected size of the test. For instance, nonlinear causal relationships between production and prices are demonstrated in both directions, however, these results were ignored by the conventional F-test. A similar results between money and prices are obtained at high lag variables.