• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.102-108
• /
• 2005

We have developed highly stabilized (p-i-n)-type protocrystalline silicon (pc-Si:H) multilayer solar cells. To achieve a high conversion efficiency, we applied a double-layer p-type amorphous silicon-carbon alloy $(p-a-Si_{1-x}C_x:H)$ structure to the pc-Si:H multilayer solar cells. The less pronounced initial short wavelength quantum efficiency variation as a function of bias voltage proves that the double $(p-a-Si_{1-x}C_x:H)$ layer structure successfully reduces recombination at the p/i interface. It was found that a natural hydrogen treatment involving an etch of the defective undiluted p-a-SiC:H window layer before the hydrogen-diluted p-a-SiC:H buffer layer deposition and an improvement of the order in the window layer. Thus, we achieved a highly stabilized efficiency of $9.0\%$ without any back reflector.

• BMB Reports
• /
• v.30 no.5
• /
• pp.346-351
• /
• 1997

The maximum adsorption/desorption conditions and the adsorption mechanism of globular proteins to vaccine adjuvants were determined. The maximum adsorption ratio of protein to the $Al^{3+}$ content of aluminum oxyhydroxide and the optimal adsorption pH are 2:1 (${\mu}g:{\mu}g$) for bovine serum albumin (BSA) at pH 6.0 and 2.5:1 (${\mu}g:{\mu}g$) for immunoglobulin G (IgG) at pH 7.0, respectively. The maximum adsorption ratio onto aluminum phosphate gel was 1.5:1 (${\mu}g$ Protein:${\mu}g$ $Al^{3+}$) at pH 5.0 for both BSA and IgG. Adsorption of the native globular proteins, BSA and IgG, to aluminum oxyhydroxide and aluminum phosphate gel was reversible as a function of pH. Complete desorption of these proteins from aluminum phosphate gel was observed at alkaline pH, whereas only 80~90% removal from aluminum oxyhydroxide was achieved with alkaline pH and 50 mM phosphate buffer. We conclude that electrostatic and hydrogen bonding interactions between the native proteins and adjuvants are important binding mechanisms for adsorption, and that the surface charge of the protein and the colloid components control the maximum adsorption conditions.

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.152-162
• /
• 2012

In Korean apartment housing, balcony is semi-outdoor space for storage and drying laundry. Recently, this semi-outdoor balcony space has been merged into indoor living space with the legal permission of balcony extension. It results in disappearance of the original function of balcony in apartment housing. This study attempts to propose better utilization of balcony extension by analyzing how balcony has been extended and used, and what residents' needs are. This study asks 400 housewives living in apartment housing in Jangyu new urban area, Kyungnam. Findings are : 1) Balcony extensions are carried out in a living room, a large bedroom and a small bedroom. Most extensions are made for enlarging adjacent indoor living space; 2) Original balcony that is not extended is used for drying laundry, resting, flower pot, storing, and kid's playing; 3) The residents recognize that problems of balcony extension are the decreased heating efficiency, the reduced soundproofing effect, the loss of spare housework space, and the disappearance of buffer between indoor and outdoor space; 4) Many residents want to extend their balcony space of a small bedroom and a large bedroom and to keep the balcony space of a kitchen-dining room and a master bedroom as they are.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2008.10a
• /
• pp.267-284
• /
• 2008

Consider a supply chain where products are produced at a manufacturing system, shipped to a distribution center, and then supplied to customers. The distribution center controls inventory based on a base-stock policy, and whenever a unit of product is demanded by a customer, an order is released to the production system. Unsatisfied demand is backordered, and the inventory and backordered units are a function of the base-stock level. The manufacturing system is modeled as an M/M/s/c queueing system, and orders exceeding the limited buffer capacity are blocked and lost. The throughput of the manufacturing system and the steady state distribution of the outstanding orders are functions of number of servers and buffers of the manufacturing system. There is a profit obtained from throughput and costs due to servers and buffers of the manufacturing system, and also costs due to inventory positions of the distribution center, and we want to maximize the total production profit minus the total cost of the supply chain by simultaneously determining the optimal number of servers and buffers of the manufacturing system and the optimal base-stock level of the distribution center. We develope two algorithms, one analytical but without guarantee of the optimal solution and one optimal but without complete analytical proofs. The problem integrates strategic problem of the manufacturing system with tactical problem of the distribution center in a supply chain.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.2
• /
• pp.5-17
• /
• 2017

The main objective of the study is to measure the vulnerability of Indonesia's financial system stability in response to external shocks, including from regional economies namely three biggest Indonesia major trading partners (China, the U.S and Japan) and other external factors (oil price and the federal funds rate). Using Autoregressive Distributed Lag (ARDL) model and Orthogonalized Impulse Response Function (OIRF) with quarterly data over the period Q4 2002 - Q1 2016, results confirm that, 1) oil price response has the largest effect to Indonesia financial stability system and the effect period is the longest compared to others, represented by NPL and IHSG; 2) among those three economies, only China's economic growth has significantly positive effect to Indonesia financial stability system. Based on the findings it is better for the authorities to: 1) Diversify international trade commodities by decreasing share of oil, gas, and mining export and boosting other potential sectors such as manufacture, and fisheries; 2) Ensure the survival of Indonesia large coal exporter companies without neglecting burden of national budget; and 3) Create buffer for demand shock from specific countries by diversifying and increasing share of trading from other countries particularly from ASEAN member states.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.122-128
• /
• 2008

Multiprocessor architectures and platforms, such as, a multiprocessor system on chip (MPSoC) recently introduced to extend the applicability of the Moore's law, depend upon concurrency and synchronization in both software and hardware to enhance design productivity and system performance. With the rapidly approaching billion transistors era, some of the main problem in deep sub-micron technologies characterized by gate lengths in the range of 60-90 nm will arise from non scalable wire delays, errors in signal integrity and non-synchronized communication. These problems may be addressed by the use of Network on Chip (NOC) architecture for future System-on-Chip (SoC). We have modeled a concurrent architecture for a customizable and scalable NOC in a system level modeling environment using MLDesigner (from MLD Inc.). Varying network loads under various traffic scenarios were applied to obtain realistic performance metrics. We provide the simulation results for latency as a function of the buffer size. We have abstracted the area results for NOC components from its FPGA implementation. Modeled NOC architecture supports three different levels of quality-of-service (QoS).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.91-105
• /
• 2019

Discrete-time Queueing models are frequently utilized to analyze the performance of computing and communication systems. The length of busy period is one of important performance measures for such systems. In this paper, we consider the busy period of the Geo/Geo/1/K queue with a single vacation. We derive the moments of the length of the busy (idle) period, the number of customers who arrive and enter the system during the busy (idle) period and the number of customers who arrive but are lost due to no vacancies in the system for both early arrival system (EAS) and late arrival system (LAS). In order to do this, recursive equations for the joint probability generating function of the busy period of the Geo/Geo/1/K queue starting with n, 1 ≤ n ≤ K, customers, the number of customers who arrive and enter the system, and arrive but are lost during that busy period are constructed. Using the result of the busy period analysis, we also numerically study differences of various performance measures between EAS and LAS. This numerical study shows that the performance gap between EAS and LAS increases as the system capacity K decrease, and the arrival rate (probability) approaches the service rate (probability). This performance gap also decreases as the vacation rate (probability) decrease, but it does not shrink to zero.

• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.116-121
• /
• 2000

We measured surface photovoltage (SPV) of $Al_{0.24}Ga_{0.76}As/GaAs$ epilayer grown by molecular beam epitixy (MBE). The band gap energies of $Al_{0.24}Ga_{0.76}As/GaAs$ epilayer, GaAs substrate and buffer layer obtained from SPV signals are 1.70, 1.40 and 1.42 eV, respectively. There results are in good agreements with photoreflectance (PR) measurement. The measured SPV intensity of GaAs substrate is three times larger than $Al_{0.24}Ga_{0.76}$Asepilayer by carrier mobility difference. The parameters of Varshni equation were determined from the SPV spectra as a function of temperature.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.28-33
• /
• 2004

An in-line fiber coupler, based on side-polished single-mode fibers covered with an intermediate coupling layer and a planar waveguide, is analyzed by modeling the interaction region as an equivalent multi-layered planar waveguide. The reflectance for the multi-layered structure with and without buffer layer is illustrated as a function of the refractive index and thickness of the overlay waveguides. When the refractive index of the overlay waveguides is greater than that of the fiber core, the conditions for the intermediate coupling layer to increase the power coupling from the fiber to the overlays is also explained. Through the experimental results using a LiNbO$_3$planar waveguide, we show that the theoretical analysis is reasonable and in good agreement with the measured values.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.636-643
• /
• 2008

The purpose of this study was to establish the proper amount of eases according to the body type of men's bodice basic pattern. The 3 subjects in 30's men were selected for developing fitted pattern for each type. And the results of the wearing test for individual subject by distributing ease amount are as follows. The wearing test is administrated by a division of 12cm, 15m, and 18cm areas respectively after separating the fitted pattern for each type in a vertical and horizontal ways. There exists a significant difference in ease according to the measures of chest circumference of subjects. Also, it is shown that the more comfortable in function, the better visible in appearance as the ease gets proper. As to regions, the amount and ratio of ease chest circumference are increased in proportion to the size of the chest circumference. The scye depth is affected by the ease of chest circumference, while the ease of the interscye and the back breadth are lessened due to the effect of their appearances. And the side breadth is required as a buffer to complement the shortage of the interscye and the back breadth because the ease of either the interscye or the back breadth is partially transferred in motion.