• Nuclear Engineering and Technology
• /
• v.44 no.1
• /
• pp.89-102
• /
• 2012

The buffer and backfill are important components of the engineered barrier system in a high-level waste repository, which should be constructed in a hard rock formation at a depth of several hundred meters below the ground surface. The primary function of the buffer and backfill is to seal the underground excavation as a preferred flow path for radionuclide migration from the deposited high-level waste. This study investigates the hydraulic conductivity and swelling pressure of Kyungju Ca-bentonite, which is the candidate material for the buffer and backfill in the Korean reference high-level waste disposal system. The factors that influence the hydraulic conductivity and swelling pressure of the buffer and backfill are analyzed. The factors considered are the dry density, the temperature, the sand content, the salinity and the organic carbon content. The possibility of deterioration in the sealing performance of the buffer and backfill is also assessed.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.695-701
• /
• 2009

Side Buffer with Anti-Climber is absorber and anti climber during impact. The Overload Protection Device protects the car underframe from being damaged in case of release of the overload protection. In case of heavy impacts(60 ton), the load is converted into deformation energy by plastic deformation of the tear-off bolts This paper describes a study on this function applied for Side Buffer and Overload Protection Device.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2006

In this paper we consider a design problem of a cyclic queueing network with two stages, each with a local buffer of limited capacity. Based on the theory of reversibility and product-form solution, we derive the throughput function of the network as a key performance measure to maximize. Two cases are considered. In case each stage consists of a single server, an optimal allocation policy of a given buffer capacity and work load between stages as well as the optimal number of customers is identified by exploiting the properties of the throughput function. In case each stage consists of multiple servers, the optimal policy developed for the single server case doesn't hold any more and an algorithm is developed to allocate with a small number of computations a given number of servers, buffer capacity as well as total work load and the total number of customers. The differences of the optimal policies between two cases and the implications of the results are also discussed. The results can be applied to support the design of certain manufacturing and computer/communication systems.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.555-562
• /
• 2004

This paper presents the development and application of a riparian buffer zone design model(RBZDM). The model was developed as a decision-making tool for watershed management, by integrating geographic information system(GIS) and analytical hierarchy process(AHP) theory. Several factors for watershed management, such as pollution removal capacity, land aquisition cost, distribution of point and non-point pollution sources, and possibility of new pollution source location, were analyzed based on AHP theory. The vegetated buffer zone width was designed using GIS-based riparian buffer analysis. The developed model was applied to the Kyoungan Stream watershed, which is an important part of Paldang lake catchment area. The Kyoungan stream watershed was divided into sixteen subbasins. Six of them belong to the main stem, where the model was applied. Ten alternatives of buffer zone width and five hierarchial levels were designed. The relative importance and the relative preference were computed by pair-wise comparison of evaluation criteria given in hierarchial levels. The buffer zone width was determined by linear function of the given alternatives and relative preferences. From this study, it was determined that the six buffer zone widths of Kyoungan main stems would be 1,594, 1,744, 1,856, 1,782, 1,338, 1,780 meter, from upstream to downstream.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.379-388
• /
• 2007

Disordered streams may cause inaccurate or delayed results in window-based queries. Existing approaches usually leverage buffers to hand]e the streams. However, most of the approaches estimate the buffer size simply based on the maximum network delay in the streams, which tends to over-estimate the buffer size and result in high latency. In this paper, we propose a probabilistic approach to estimate the buffer size adaptively according to the fluctuated network delays. We first assume that intervals of tuple generations follow an exponential distribution and network delays have a normal distribution. Then, we derive an estimation function from the assumptions. The function takes a drop ratio as an input parameter, which denotes a percentage of tuple drops permissible during query execution. By describing the drop ratio in a query specification, users can control the quality of query results such as accuracy or latency according to application requirements. Our experimental results show that the proposed function has better adaptivity than the existing function based on the maximum network delay.

• Journal of the Korea Society for Simulation
• /
• v.12 no.4
• /
• pp.95-102
• /
• 2003

Stream servers are for supplying multimedia stream data to users through the internet such as movies and music without discontinuation. A typical stream server is designed roughly by considering the characteristics of stream services and by employing processors, memory, PCI bus, Ethernet, TOE and disks. This study focuses on deciding the priority for using resources such as PCI bus, buffer memory and TOE buffer, which have limited capacities in a typical stream server. When the priorities for using limited resources are not given properly, the stream servers may not even function as originally designed. The simulation study shows that the top priority for using PCI bus for normal streaming services should be given to the operation that sends data from buffer memory to TOE buffer. Giving priority for using PCI bus to other operation such as sending data from disks to memory results in a deadlock phenomenon.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.139-151
• /
• 1997

An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications (IPC) network. In such a system, there should be interfaces to convent IPC traffic from message format to cell format and vice versa, that is, mechanisms to perform the SAR (Segmentation And Reassembly) sublayer functions. In this paper, we concern the cell reassembly mechanism among them, mainly focussed on buffer management schemes. We consider a few alternatives to implement cell reassembly function block, namely, separated buffering, reserved buffering and shared buffering in this paper. In case of separated and reserved buffering, we employ a continuous time Markov chain for the performance evaluation of cell reassembly mechanism, judicially defining the states of the mechanism. Performance measures such as measage loss probability, mean number of message queued in buffer and average reassembly delay are obtianed in closed forms. In case of shared buffering, we compare the alternatives for implementing cell reassembly function block using simulation because it is almost impossible to analyze the mechanism of shared buffering by analytical modeling. Some illustrations are given for the performance analysis of the alternatives to implement cell reassembly function block.

• ETRI Journal
• /
• v.46 no.4
• /
• pp.604-618
• /
• 2024

In wireless sensor network (WSN) monitoring systems, redundant data from sluggish environmental changes and overlapping sensing ranges can increase the volume of data sent by nodes, degrade the efficiency of information collection, and lead to the death of sensor nodes. To reduce the energy consumption of sensor nodes and prolong the life of WSNs, this study proposes a dual layer intracluster data fusion scheme based on ring buffer. To reduce redundant data and temporary anomalous data while guaranteeing the temporal coherence of data, the source nodes employ a binarized similarity function and sliding quartile detection based on the ring buffer. Based on the improved support degree function of weighted Pearson distance, the cluster head node performs a weighted fusion on the data received from the source nodes. Experimental results reveal that the scheme proposed in this study has clear advantages in three aspects: the number of remaining nodes, residual energy, and the number of packets transmitted. The data fusion of the proposed scheme is confined to the data fusion of the same attribute environment parameters.

• The Korean Journal of Pharmacology
• /
• v.8 no.2
• /
• pp.63-69
• /
• 1972

The effects of omission of buffers from Krebs-Ringer medium on contractile activity, membrane potentials and ATP content of electrically stimulated isolated rat atria were investigated. 1) Contractile status: A rapid and marked depression of the contractile activity of atria occurred when buffer-free medium was substituted for the normal Krebs-Ringer medium. 2) Electrical status: The omission of buffers from medium did not alter the resting or action potential magnitudes of atria. However, the action potential duration was on initial increase followed by a decrease in the buffer-free medium. 3) ATP concentration: The omission of buffers from medium resulted in a marked decrease in the ATP levels of atria. It has been also found in the present study that bicarbonate buffer plays an important role for the maintenance of the contractility and ATP levels of the heart. The contractile depression by the omission of buffers was not directly associated with electrical alterations in resting or action potentials of the heart. In the absence of bicarbonate-buffer, glucose no longer plays to maintain the contractile activity and the ATP levels of rat atria.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.111-118
• /
• 2008

Riparian buffer zone prevents sediment entry into drainage channels or as a protection from runoff and wind erosion. However, Studies about its removing effect according to Riparian buffer zone are shorted now. In this study, using the SWAT model, Byongseong watershed is built on the Arcview GIS. Using the function of the filter strip in SWAT model, it is also examined about the variation of sediment yield. As a simulation result, the case of constructing riparian buffer zones at subbasins near the outlet shows generally high efficiency on removing sediment yield. In addition, according to the scenario analysis of changing riparian buffer zone width, it is thought that 5-10m riparian buffer zone width is the highest efficiency on removing sediment yields generated from Byeongseong watershed.