• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3594-3610
• /
• 2015

Recent advancements in broadband wireless communication technologies enable mobile users to receive video streaming services with various smart devices. The long term evolution (LTE) network provides high bandwidth and low latency for several emerging mobile applications. This paper proposes the buffer aware scheduling (BAS) approach to schedule the downlink video traffic in LTE network. The proposed BAS scheme applies the weighting function to heuristically adjust the scheduling priority by considering the buffer status and channel condition of UE so as to reduce the time that UE stays in the connected state without receiving data. Both of 1080P and 2160P resolution video streaming sources were applied for exhaustive simulations to examine the performance of the proposed scheme by comparing to that of the fair bandwidth (FB) and the best channel quality indicator (CQI) schemes. The simulation results indicate that the proposed BAS scheme not only achieves better performance in power saving, streaming delivery time, and throughput than the FB scheme while maintaining the similar performance as the best CQI scheme in light traffic load. Specifically, the proposed scheme reduces streaming delivery time and generates less signaling overhead than the best CQI scheme when the traffic load is heavy.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.95-102
• /
• 2005

This paper is purpose for improvement performance wireless lan of IEEE802.11a/b/g. Access point utilized a single server, multi-queuing system, FIFS system model to adapted priority multi-bufferto be alteration packet type. The main purpose of the paper improve the transmission rate and the performance of access point to settle transmission delay for load in MAC, has priority multi-buffer. We use experimentation to obtain our model of the access point and buffer-related parameters. Using our test design, we are able to extract the parameters of an analytic equation giving the average service time of a packet as a function of packer IP payload.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.5
• /
• pp.409-417
• /
• 2003

We have studied electrical properties and luminous efficiency of organic light-emitting diodes(OLEDs) with different buffer layer and cathodes in a temperature range of 10 K and 300 K. Four different device structures were made. The OLEDs are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinato) aluminum(III) (Alq$_3$) as an electron transport and omissive layer, and poly(3,4-ethylenedioxythiophene) :poly (styrenesulfonate) (PEDOT:PSS ) as a buffer layer. And LiAl was used as a cathode. Among the devices, the ITO/PEDOT:PSS/TPD/Alq$_3$/LiAl structure has a low energy-barrier height for charge injection and show a good luminous efficiency. We have got a highly efficient and low-voltage operating device using the conductive PEDOT:PSS and low work-function LiAl. From current-voltage characteristics with temperature variation, conduction mechanisms are explained SCLC (space charge limited current) and tunneling one. We have also studied energy barrier height and luminous efficiency at various temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.379-379
• /
• 2010

Recent technical advances in OLEDs (organic light emitting devices) requires more and more the improvement in low operation voltage, long lifetime, and high luminance efficiency. Inverted top emission OLEDs (ITOLED) appeared to overcome these problems. This evolved to operate better luminance efficiency from conventional OLEDs. First, it has large open area so to be brighter than conventional OLEDs. Also easy integration is possible with Si-based driving circuits for active matrix OLED. But, a proper buffer layer for carrier injection is needed in order to get a good performance. The buffer layer protects underlying organic materials against destructive particles during the electrode deposition and improves their charge transport efficiency by reducing the charge injection barrier. Hexaazatriphenylene-hexacarbonitrile (HAT-CN), a discoid organic molecule, has been used successfully in tandem OLEDs due to its high workfunction more than 6.1 eV. And it has the lowest unoccupied molecular orbital (LUMO) level near to Fermi level. So it plays like a strong electron acceptor. In this experiment, we measured energy level alignment and hole current density on inverted OLED structures for hole injection. The normal film structure of Al/NPB/ITO showed bad characteristics while the HAT-CN insertion between Al and NPB greatly improved hole current density. The behavior can be explained by charge generation at the HAT-CN/NPB interface and gap state formation at Al/HAT-CN interface, respectively. This result indicates that a proper organic buffer layer can be successfully utilized to enhance hole injection efficiency even with low work function Al anode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.429-432
• /
• 2004

In this paper, we propose a new sorting algorithm for ATM switch with a shared buffer which has a sequencer architecture with single queue. The proposed switch performs a sorting procedure of ATM cell based on the output port number of ATM cell with hardware implementation. The proposed architecture has a single buffer physically but logically it has function of multi-queue which is designed at most to control the conflicts in output port. In the future, this architecture will take various applications for routing switch and has flexibility for the extension of system structure. therefore, this structure is expected on good structure in effective transmission.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.4
• /
• pp.673-689
• /
• 2009

We analyze $MAP_1,\;MAP_2$/G/1 finite queues with service scheduling function dependent upon queue lengths. The customers are classified into two types. The arrivals of customers are assumed to be the Markovian Arrival Processes (MAPs). The service order of customers in each buffer is determined by a service scheduling function dependent upon queue lengths. Methods of embedded Markov chain and supplementary variable give us information for queue length of two buffers. Finally, the performance measures such as loss probability and mean waiting time are derived. Some numerical examples also are given with applications in telecommunication networks.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1087-1090
• /
• 2005

In all contemporary superscalar processors, the result repositories are implemented as the Reorder Buffer(ROB) slots. In such designs, the ROB is a large multi-ported structure. There are several approaches for reducing the ROB complexity in processors. The one technique relies on a distributed implementation that spreads the centralized ROB structure across the function units(FUs). Each distributed component sized to match the FU workload and with one write port and one read port on each component. We are using M/M/1 Queuing theory to determine the number of entries in each ROB component that the performance of processor depends on. Our schemes are evaluated using the simulation of CPU2000 benchmarks.

• Communications of the Korean Mathematical Society
• /
• v.13 no.3
• /
• pp.603-627
• /
• 1998

The leaky bucket scheme is a promising method that regulates input traffics for preventive congestion control. In the ATM network, the input traffics are bursty and transmitted at high-speed. In order to get the low loss probability for bursty input traffics, it is known that the leaky bucket scheme with static leaky rate requires larger data buffer and token pool size. This causes the increase of the mean waiting time for an input traffic to pass the policing function, which would be inappropriate for real time traffics such as voice and video. We present the leaky bucket scheme with dynamic leaky rate in which the token generation period changes according to buffer occupancy. In the leaky bucket scheme with dynamic leaky rate, the cell loss probability and the mean waiting time are reduced in comparison with the leaky bucket scheme with static leaky rate. We analyze the performance of the proposed leaky bucket scheme in discrete-time case by assuming arrival process to be Markov-modulated Bernoulli process (MMBP).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.1051-1057
• /
• 2000

A traveling-wave CPW(coplanar waveguide) electrode with abruptly broken input/output-taper for LiNbO$_3$optical modulator was designed and fabricated. The electrical characteristics of traveling-wave electrode on z-cut LiNbO$_3$crystal with SiO$_2$buffer layers were measured by network analyzer. To confirm the possibility of the electro-optic modulator electrode, detailed calculations of the impedance, microwave effective index and attenuation constants are presented as a function of the microwave electrode thickness, but the buffer layer thickness is fixed as 1${\mu}{\textrm}{m}$. These characteristics are discussed from the viewpoint of the device optimization and are expected to be design guides for the LiNbO$_3$modulator’s electrodes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.